Abstract:Geometric error component identification is needed to realize the geometric error compensation which can significantly enhance the accuracy of multi-axis machine tools. Laser tracker has been applied to geometric error identification of machine tools increasingly due to its high capability in 3D metrology. A general method, based on point measurement using a laser tracker is developed for identifying the geometric error components of multi-axis machine tools in this study. By using this method, all the component errors and location errors of each axis (including the linear axis and rotary axis) of the multi-axis machine tools can be measured. Three pre-described targets are fixed on the stage of the under-test axis which moves step by step. The coordinates of the three targets at every step are determined by a laser tracker based on the sequential multilateration method. The volumetric errors of these three target points at each step can be obtained by comparing the measured values of the target points’ coordinates with the ideal values. Then, nine equations can be established by inversely applying the geometric error model of the axis under test, which can explicitly describe the relationship between the geometric error components and volumetric error components, and then the component errors of this axis can be obtained by solving these equations. The location errors of the axis under test can be determined through the curve fitting. In brief, all the geometric error components of a single axis of multi-axis machine tools can be measured by the proposed method. The validity of the proposed method is verified through a series of experiments, and the experimental results indicate that the proposed method is capable of identifying all the geometric error components of multi-axis machine tools of arbitrary configuration.

A New Direct 9-line Geometric Error Measurement Method for CNC Machine Tools

A line measurement method for geometric error measurement of the vertical machining center

Volumetric error identification for CNC machine tool based on multi-body system and vector diagonal measurement

Fast Detection of Geometric Errors for Three-Axis Machine Tools with Combined Double-Ball Bars Based on Spatial Circle Detection

Full-scale Measurement of CNC Machine Tools

Geometric Error Inentification of CNC Machine Tools by Using Laser Interferometer

A high-precision laser method for directly and quickly measuring 21 geometric motion errors of three linear axes of computer numerical control machine tools

A New Error Measurement Method to Identify All Six Error Parameters of A Rotational Axis of A Machine Tool

The technical method of geometric error measurement for multi-axis NC machine tool by laser tracker

Volumetric Error Modeling And Analysis For Cnc Machine Tool Based On Multi-Body System

Geometric Error Identification of Gantry-Type CNC Machine Tool Based on Multi-Station Synchronization Laser Tracers

Research on the Error Measurement and Error Compensation Technology for CNC Machine Tools

Research on the Errors Measurement for CNC Machine Tools

Research Status and Trend of Geometrical Error Measurement of CNC Machine Tools

Error Modeling and Identification Technology for Circular Path of NC Machine Tools

Geometric Error Identification and Compensation of Linear Axes Based on A Novel 13-Line Method

A General Strategy for Geometric Error Identification of Multi-Axis Machine Tools Based on Point Measurement

A New Approach to Identify Geometric Errors Directly from the Surface Topography of Workpiece in Ultra-Precision Machining

A method of geometric error identification and compensation of CNC machine tools based on volumetric diagonal error measurements

Measuring geometrical errors of linear axis of machine tools based on the laser tracker

Four-station Laser Tracer-Based Geometric Error Measurement of Rotary Table