Abstract:In recent years, the utilization of copper tailing and removal of sulfur dioxide (SO2) have become the focus of research. In this study, copper tailing was used as an iron ion donator to remove SO2 from flue gas. To improve the desulfurization performance, the additive was selected from metal sulfates, such as ferrous sulfate, ferric sulfate, manganese sulfate, and scrap iron. A series of experiments were conducted in a bubble reactor to study the effects of various critical factors, including the inlet SO2 concentration, solid/liquid ratio, dosage of additive, gas flow rate, O-2 concentration, and reaction temperature, on the flue gas desulfurization performance. Various characterizations, such as X-ray fluorescence spectroscopy, X-ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy with energy-dispersive spectroscopy, X-ray photoelectron spectroscopy, inductively coupled plasma spectroscopy, and titration, were used to study the properties of copper tailing and absorption liquid. Furthermore, the reaction mechanism of SO2 removal was also studied. The results showed that copper tailing combined with MnSO4 center dot H2O exhibited the highest SO2 removal efficiency. The desulfurization efficiency reached approximately 99% and was mainly affected by the flue gas flow rate and the absorption temperature. Mn2+ served as a catalyst for liquid-phase catalytic oxidation. Furthermore, the leaching reaction contributed to the consumption of some H+, whereas Fe2+ (primarily leached from fayalite in the copper tailing) served as its activation state and variable valence state with Mn2+ for the efficient removal of SO2. Moreover, the reduction of flue gas desulfurization is attributed to the accumulation of SO42- and H+ in the slurry.

Inhibiting oxidation and enhancing absorption characteristics of sodium sulfite for SO2 removal from the non-ferrous smelting flue gas

Mechanistic Study on the Enhanced SO2-tolerant Ability of CuCl2-promoted MnOx-CeOx Mixed Oxide for Hg0 Removal

[Inhibition of Sulfite Oxidation Catalyzed by Heavy Metals in Dual Alkali Flue Gas Desulfurization Slurry].

Oxidation and absorption of SO2 and NOx by MgO/Na2S2O8 solution at the presence of Cl−

Enhanced simultaneous absorption of NO and SO2 in oxidation-reduction-absorption process with a compounded system based on Na2SO3

Buffer effect of MgO on Na2SO3 to stabilize S(IV) for the enhancement in simultaneous absorption of NOx and SO2 from non-ferrous smelting gas

Effect of Additive Agents on the Simultaneous Absorption of No2 and So2 in the Calcium Sulfite Slurry

Oxidation Inhibition of Sulfite in Dual Alkali Flue Gas Desulfurization System.

Investigation on removal of noX and SO2 from flue gas by combined ozone with absorption and by-product treatment

Simultaneous Removal of SO2 and NO by FeII(EDTA) Solution: Promotion of Mn Powder and Mechanism of Reduction

Influence of the Chemical Composition of MgAlFeCu Mixed Oxides As Catalysts for SO2Removal

Development of Catalyst-Sorbents for Simultaneous Removal of So2 from Flue Gas by Low Temperature Ozone Oxidation

Study on Fine Particles Influence on Sodium Sulfite and Oxygen Gas-Liquid Reaction

Experiment on Simultaneous Absorption of NO and SO2 from Sintering Flue Gas by Oxidizing Agents of KMnO4/NaClO

CHARACTERISTICS OF SULFURDIOXIDE ABSORPFION IN MULTI-COMPONENT SUSPENSIONS

SO3 Removal from Flue Gas by Using Na2SO3

Simultaneous removal of SO2 and NO using a spray dryer absorption (SDA) method combined with O3 oxidation for sintering/pelleting flue gas

Simultaneous Removal of SO2 and NO x Using Steel Slag Slurry Combined with Ozone Oxidation

Mechanical insights into desulfurization by peroxymonosulfate oxidation via a non-reactive oxygen species pathway

Removal of SO2 from Smelting Flue Gas by Using Copper Tailings with MnSO4: Factors Optimization by Response Surface Methodology

Efficient Removal of Sulfur Dioxide from Flue Gas Through Liquid Catalytic Oxidation Using Copper Tailing As the in Situ Iron Ion Donator