Abstract:The hydrodynamics of solid-liquid mixing process in a stirred tank with four pitched-blade impellers, fractal 1 impellers, and fractal 2 impellers were investigated using computational fluid dynamics (CFD) simulation. An Eulerian-Eulerian approach, standard k-epsilon turbulence model, and multiple reference frames (MRF) technique were employed to simulate the solid-liquid two-phase flow, turbulent flow, and impeller rotation, respectively. The effects of impeller speed, impeller type, impeller spacing, impeller blade tilt angle, impeller blade shape, solid particle size and initial solid particle loading on the solid particle suspension quality were investigated. Results showed that the homogenous degree of solid-liquid system increased with the increase of impeller speed. The impeller spacing of T5/6 and T and impeller blade tilt angle of 60 degrees and 45 degrees were appropriate for the solid-liquid suspension process. Fractal shape impeller was more efficient than jagged shape impeller in solid-liquid mixing process. Larger particle diameter and higher initial solid particle loading resulted in less homogenous distribution of solid particles. It was found that fractal impeller could improve the solid particle suspension quality compared with four pitched-blade impeller under the same power consumption, increasingly so with the fractal iteration number of fractal impeller. Moreover, fractal impeller reduced the size of impeller trailing vortex and consumed less power consumption compared with four pitched-blade impeller at the same impeller speed, and the more the number of fractal iteration, the higher the impeller energy utilization rate of fractal impeller. (C) 2019 The Society of Powder Technology Japan. Published by Elsevier B.V. and The Society of Powder Technology Japan. All rights reserved.

CFD Research on the Influence of 45° Disk Turbine Agitator Blade Diameter on the Solid–Liquid Mixing Characteristics of the Cone-Bottom Stirred Tank

Computational Fluid Dynamics Simulation of Hydrodynamics in an Uncovered Unbaffled Tank Agitated by Pitched Blade Turbines

Computational Fluid Dynamics Simulation of Bubble Size and Local Gas Holdup in Stirred Vessel

CFD-PBM Investigation on Droplet Size Distribution in a Liquid–Liquid Stirred Tank: Effect of Impeller Type

Numerical Investigation of Hydrodynamics and Heat Transfer for Bingham-pseudoplastic Fluids in an Industrial Coiled Stirred Tank

Micro-Mixing Enhancement in a Taylor-Couette Reactor Using the Inner Rotors with Various Surface Configurations

Numerical Simulation of Dense Solid-Liquid Mixing in Stirred Vessel with Improved Dual Axial Impeller

CFD Simulation of the Mixing and Dispersing of Floating Particles in a Viscous System

Numerical Simulation of Power Consumption and Mixing Characteristics of Novel Large-Double-blade Impeller

Numerical investigation on the intensification of coaxial slurry mixing systems

Numerical Simulation of Solid-Liquid Mixing Characteristics in a Stirred Tank with Fractal Impellers

Experimental Study of Influence of the Impeller Spacing on Flow Behaviour of Double‐Impeller Stirred Tank

The Influence of Impeller Combination on the Gas-Liquid Dispersion Performance of a Coaxial Mixer in Viscous Fluids

Numerical optimization for blades of Intermig impeller in solid–liquid stirred tank

Micromixing Simulation of Novel Large-Double-Blade Impeller

Using CFD and Machine Learning to Explore Chaotic Mixing in Laminar Diameter-Transformed Stirred Tanks

CFD simulation on shear-thinning gas-liquid dispersion in coaxial mixer

CFD simulation and experimental analysis of solid-liquid mixing characteristics in a stirred tank with a self-similarity impeller

Experimental and Numerical Study on Flow Resistance and Bubble Transport in a Helical Static Mixer

CFD Prediction of the Critical Agitation Speed for Complete Dispersion in Liquid‐Liquid Stirred Reactors

CFD Simulation of Solid Suspension in a Stirred Reactor Driven by a Dual Punched Rigid-Flexible Impeller