Abstract:Dimensionally stable anodes of titanium (Ti) metal coated with mixed metal oxides (MMO) are widely used in several electrochemical applications, especially chloro-alkali electrolysis. Herein, we deposited MMO coatings on Ti substrates in different compositions, namely, (60%RuO 2 -40%TiO 2 ), (60%RuO 2 -30%TiO 2 -10%IrO 2 ), and (60%RuO 2 -20%TiO 2 -15%IrO 2 -5%Ta 2 O 5 ), where RuO 2 has the same percentage ratio in all coatings. The aim was to use these electrodes for chlorine evolution reaction (CER) and oxygen evolution reaction (OER) applications. Electrochemical characterization of the coated samples was performed to identify the best Ti/MMO electrodes with the highest efficiencies among the various prepared combinations. The role of IrO 2 and Ta 2 O 5 in enhancing corrosion resistance and electrochemical efficacy was up for debate. Scanning electron microscope (SEM), energy dispersive spectroscopy (EDS), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS) analyses were exploited to determine the surface morphology, chemical composition, crystallinity, surface composition, and chemical states of the acquired coatings. The differential scanning calorimetry (DSC) method was used to evaluate the apparent activation energy ( ) of the deposited MMO. Additionally, the electrochemical performance of our designed coatings was scrutinized by cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), a current on–off test, a CV stability test (ST), and an accelerated stability test (AST). Furthermore, linear sweep voltammetry (LSV) was incorporated to assess the catalytic efficacy of the prepared anodes toward the CER in a brine solution of pH 2 and the OER in 1 M H 2 SO 4 . It became clear that the CER and OER incurred almost the same potential value (1.1 V) on both Ti/RuO 2 -TiO 2 and Ti/RuO 2 -TiO 2 -IrO 2 electrodes. However, on the Ti/RuO 2 -TiO 2 -IrO 2 -Ta 2 O 5 anode, there was a 0.2 V potential difference between the CER occurring at 1.1 V and the OER happening at 1.3 V.

Enhanced chlorine evolution from dimensionally stable anode by heterojunction with Ti and Bi based mixed metal oxide layers prepared from nanoparticle slurry

RuO2/IrO2 nanoparticles decorated TiO2 nanotube arrays for improved activity towards chlorine evolution reaction

Green synthesis and characterization of binary, ternary, and quaternary Ti/MMO anodes for chlorine and oxygen evolution reactions

Deposition Of Ceo2 On Tio2 Nanorods Electrode By Dielectric Barrier Discharge Plasma To Enhance The Photoelectrochemical Performance In High Chloride Salt System

Enhancing Ru-Cl interaction via orbital hybridization effect in Ru0.4Sn0.3Ti0.3 electrode for efficient chlorine evolution

Ruthenium Oxide Clusters Immobilized in Cationic Vacancies of 2D Titanium Oxide for Chlorine Evolution Reaction

High chlorine evolution performance of electrochemically reduced TiO2 nanotube array coated with a thin RuO2 layer by the self-synthetic method

Mixed Metal Oxide Electrodes and the Chlorine Evolution Reaction

Neodymium‐Doped IrO2 Electrocatalysts Supported on Titanium Plates for Enhanced Chlorine Evolution Reaction Performance

Atomically dispersed dinuclear iridium active sites for efficient and stable electrocatalytic chlorine evolution reaction

Improvement of chlorine evolution stability and activity of RuO2-TiO2/IrO2-Ta2O5 electrode with low iridium content by alternating coating thermal decomposition method

Mild and rapid construction of Ti electrodes for efficient and corrosion-resistant oxidative catalysis at industrial-grade intensity

Scalable Ir-Doped NiFe2O4/TiO2 Heterojunction Anode for Decentralized Saline Wastewater Treatment and H2 Production

Sn and Sb co-doped RuTi oxides supported on TiO2 nanotubes anode for selectivity toward electrocatalytic chlorine evolution

In Situ Dissociated Chalcogenide Anions Regulate the Bi-Catalyst/Electrolyte Interface with Accelerated Surface Reconstruction toward Efficient CO 2 Reduction

Performance Enhancement of Ti/IrO2-Ta2O5 Anode through Introduction of Tantalum-Titanium Interlayer via Double-Glow Plasma Surface Alloying Technology

Oxide Encapsulated Ruthenium Oxide Catalysts for Selective Oxygen Evolution in Unbuffered pH Neutral Seawater

Regulating the Tip Effect on Single‐Atom and Cluster Catalysts: Forming Reversible Oxygen Species with High Efficiency in Chlorine Evolution Reaction

Stability of dimensionally stable anode for chlorine evolution reaction

Enhancing Oxygen Evolution Reaction Performance: Electrochemical Activation of the Biphasic CoNi/Zn(Fe,Al,Cr) 2 O 4 via Controlled Aluminum Leaching Facilitated Surface Reconstruction

IrO x Nanoclusters Modified by BaCO 3 Enable ′′Two Birds with One Stone′′ in Solar-Driven Direct Unbuffered Seawater Electrolysis