Abstract:Drilling fluids have a crucial continued role in drilling a successful well; however, most of the drilling technical and operational challenges are incorporated with the drilling mud stability and properties. The solid particles settling in drilling mud that deteriorates its stability is a common issue encountered in high-pressure high-temperature (HPHT) conditions. This issue, known as solids sagging, may eventually result in stuck pipes, wellbore instability, and loss of circulation. The objective of this work is to introduce garamite to enhance the stability of hematite-based invert emulsion mud under HPHT situations. The used garamite and hematite weighting material were analyzed using X-ray fluorescence, scanning electron microscopy, and particle size distribution to identify their compositions, morphologies, and particle sizes. The effects of adding different concentrations of garamite (0.5, 1.0, 1.25, and 1.5 g) to the field formula of hematite-based invert emulsion mud were investigated. The mud density, stability, sagging tendency, rheology, viscoelasticity, and filtration properties were studied to formulate a stabilized and distinguished-performance drilling mud. The obtained results indicated that garamite did not change the mud density while enhancing the emulsion stability by increasing the electrical stability proportionally with the added garamite quantity. The sagging experiments showed that adding 1.25 g of garamite is sufficient to prevent the sagging problem in both static and dynamic conditions as it was enough to enforce the sag parameters into the safe range of sag performance indicators. This 1.25 g of garamite improved the yield point by 152% from 19 to 48 lb./100 ft<sup>2</sup> with a slight increase in plastic viscosity from 14 cP for base mud to 18 cP and significant increase in the gelling strength and viscoelastic properties. Adding 1.25 g of garamite showed a slight enhancement in the filtration properties as the filtrate volume was reduced by 8% from 3.7 to 3.4 cm<sup>3</sup> and the filter cake thickness has 16% reduction from 2.69 to 2.26 mm. As a result, a mud with distinguished performance, in terms of rheology, suspension, sag performance, and stability, was obtained. Hence, a basis for safely drilling the HPHT formations was delivered, which reduces the drilling cost by minimizing the nonproductive time.This article has not yet been cited by other publications.

Barite–Micromax mixture, an enhanced weighting agent for the elimination of barite sag in invert emulsion drilling fluids

Stability Enhancing of Water-Based Drilling Fluid at High Pressure High Temperature

A Combined Barite–Ilmenite Weighting Material to Prevent Barite Sag in Water-Based Drilling Fluid

Prevention of Barite Sagging for Invert Emulsion Drilling Fluid While Drilling High-Pressure High-Temperature Wells

Chemical modification of barite for improving the performance of weighting materials for water-based drilling fluids

Enhancement of Static and Dynamic Sag Performance of Water-Based Mud Using a Synthetic Clay

Enhancing Hematite-Based Invert Emulsion Mud Stability at High-Pressure High-Temperature Wells

Application of Ultrafine Weighting Materials in High-Density Oil-Based Drilling Fluid Technology

Micronized calcium carbonate to enhance water-based drilling fluid properties

Investigation of magnetite-based invert emulsion mud at high pressure high temperature

Using Manganese Tetroxide for Hematite Settling Prevention in Water-Based Mud

Development of New Kill Fluids with Minimum Sagging Problems for High Pressure Jilh Formation in Saudi Arabia

Prevention of Hematite Settling in Water-Based Mud at High Pressure and High Temperature

Prevention of hematite settling using synthetic layered silicate while drilling high-pressure wells

Impact of Perlite on the Properties and Stability of Water-Based Mud in Elevated-Temperature Applications

Use of Highly Dispersed Mixed Metal Hydroxide Gel Compared to Bentonite Based Gel for Application in Drilling Fluid under Ultra-High Temperatures

Use of Mixed-Metal Oxide Water-Based Drilling Fluid System Increased Drilling Performance and Eliminated Mud Losses

Utilization of mesoporous nano-silica as high-temperature water-based drilling fluids additive: Insights into the fluid loss reduction and shale stabilization potential

The Effect of Weighting Agents on Sandstone Formation Damage from Water-Based Drilling Fluids

Experimental Study on Dynamic Barite Sag and Effects of Inclination and Pipe Rotation

Evaluation of using micronized saudi calcite in ilmenite-weighted water-based drilling fluid