Abstract:Phase-shift cavity ring-down spectroscopy (PS-CRDS) is an alternative CRDS approach that allows the detection of minute changes in cavity losses by measurement of the phase shift experienced by a modulated laser as it propagates through a high-quality factor cavity. Fiber loop resonators and microresonators have been employed in previous PS-CRDS demonstrations for liquid phase applications. Here we employ a tapered fiber-based linear fiber cavity for the demonstration of a highly sensitive sensor for sucrose concentration in water using PS-CRDS. Our linear fiber cavity has a small cavity length ( <math display="inline"> <mrow> <mo> ∼ </mo> </mrow> <mrow> <mn>1.25</mn> </mrow> <mspace width="thickmathspace"></mspace> <mrow> <mi mathvariant="normal">m</mi> </mrow> </math> ) that enables the observation and tracking of individual cavity modes in transmission and phase spectra recorded during laser sweeps. Hence, we eliminate the need for Pound–Drever–Hall locking of the laser source to the cavity resonance and thus provide a simpler experimental scheme. We analyze the recorded data sets to track the changes in phase shifts observed only when the laser wavelength is in resonance with the cavity modes. Such a mode-tracking PS-CRDS approach reveals limit of detection values less than around 400 µM, better than the performance of previously demonstrated PS-CRDS sucrose concentration sensors employing fiber loop resonators. The sensitivity of our sensor critically depends on the fiber taper diameter and can reach up to around 6°/1 mM Suc. for 3.2 µm taper diameter at 6 MHz modulation frequency using fiber Bragg gratings (FBGs) with reflectivities around 86%. This value can be further increased by employing FBGs with higher reflectivities or fiber tapers with smaller diameters provided that the cavity loss due to water absorption is compensated with an amplifier.

Linear cavity tapered fiber sensor using mode-tracking phase-shift cavity ring-down spectroscopy

Phase Shift-Cavity Ring Down Spectroscopy in Linear and Active Fiber Cavities for Sensing Applications at 1550 nm

Analysis and Design of Refractive Index Biosensors Based on Single Silicon Nanobeam Cavity

Cavity-Length Spectrum Sensing (CLSS) based on multi fiber Fabry-Pérot(F-P) cavities for refractive index monitoring

Cavity ring-down spectroscopy with a laser frequency stabilized and locked to a reference target gas absorption for drift-free accurate gas sensing measurements

A Fiber Ring Cavity Laser Temperature Sensor Based on Polymer-Coated No-Core Fiber as Tunable Filter

Dip-Type Probe Based on a Guided-Mode Resonance Sensor at the Facet of an Optical Fiber

High-Q Width Modulated Photonic Crystal Stack Mode-Gap Cavity and Its Application to Refractive Index Sensing.

Fiber-Enhanced Stimulated Raman Scattering and Sensitive Detection of Dilute Solutions

Dual-Aperture Dual-Core Photonic Crystal Fiber Sensor Based on Surface Plasmon Resonance

A simplification design of the fiber cavity ring-down technique

D-Shaped PCF with Quasi-Sinusoidal Surface Topography for Dual-Polarization and Enhanced Performance Surface Plasmon Resonance Sensor

Investigation of Intra-Cavity SPR Sensor Based on Erbium-Doped Fiber Laser

Liquid level sensor based on a single-mode hetero-core fiber structure

Suspended Slotted Photonic Crystal Cavities for High-Sensitivity Refractive Index Sensing

Photonic Crystal Fiber SPR Liquid Sensor Based on Elliptical Detective Channel

Optical sensor using space-domain active fiber cavity ringdown technique

High-accuracy Wide-Range Refractive Index Demodulation Based on Under-Sampled Fiber F-P Cavity Length Spectrum.

Highly sensitive nonlinear photonic crystal fiber based sensor for chemical sensing applications

A Miniaturized and Highly Sensitive Microwave Sensor Based on CSRR for Characterization of Liquid Materials

Numerical study of photonic crystal fiber-based optical biosensor for detection of cervical cancer