Abstract:Floating oscillating bodies constitute a large class of wave energy converters, especially for offshore deployment. Usually the Power-Take-Off(PTO) system is a directly linear electric generator or a hydraulic motor that drives an electric generator. The PTO system is simplified as a linear spring and a linear damper. However the conversion is less powerful with wave periods off resonance. Thus, a nonlinear snap-through mechanism with two symmetrically oblique springs and a linear damper is applied in the PTO system. The nonlinear snap-through mechanism is characteristics of negative stiffness and double-well potential. An important nonlinear parameter ? is defined as the ratio of half of the horizontal distance between the two springs to the original length of both springs. Time domain method is applied to the dynamics of wave energy converter in regular waves. And the state space model is used to replace the convolution terms in the time domain equation. The results show that the energy harvested by the nonlinear PTO system is larger than that by linear system for low frequency input. While the power captured by nonlinear converters is slightly smaller than that by linear converters for high frequency input. The wave amplitude, damping coefficient of PTO systems and the nonlinear parameter ? affect power capture performance of nonlinear converters. The oscillation of nonlinear wave energy converters may be local or periodically inter well for certain values of the incident wave frequency and the nonlinear parameter ?, which is different from linear converters characteristics of sinusoidal response in regular waves.

A point absorber wave energy converter with nonlinear hardening spring power-take-off systems in regular waves

An Oscillating Wave Energy Converter with Nonlinear Snap-Through Power-Take-Off Systems in Regular Waves

Application of an Adaptive Bistable Power Capture Mechanism to a Point Absorber Wave Energy Converter

Model Testing of Oscillating-Body Wave Energy Converters with Nonlinear Power-Take-Off Systems in Regular Waves

Wave Energy Converter of Inverse Pendulum with Double Action Power Take Off

A Control Method for Inverse-pendulum Wave Power Generation System Based on Hydraulic Transmission to Maintain Pressure and Ensure Constant Frequency

Recent Advances in Wave Energy Converters Based on Nonlinear Stiffness Mechanisms

Application of a coupled linear-bistable system in point absorber wave energy converter

Multi-Stable Mechanism of an Oscillating-Body Wave Energy Converter

Design and Control of a Point Absorber Wave Energy Converter with an Open Loop Hydraulic Transmission

Performance Analysis of an Adaptive Bistable Point Absorber Wave Energy Converter under White Noise Wave Excitation

Frequency- and Time-Domain Analysis of a Multi-Degree-of-freedom Point Absorber Wave Energy Converter

Low-frequency energy capture and water wave attenuation of a hybrid WEC-breakwater with nonlinear stiffness

Nonlinear stiffness mechanism for high-efficiency and broadband raft-type wave energy converters

A directly driven floater type wave energy converter with nonlinear power-take-off mechanism in irregular waves

Design of a Hydraulic Power Take-off System for the Wave Energy Device with an Inverse Pendulum

Nonlinear wave energy dissipator with wave attenuation and energy harvesting at low frequencies

Experimental research on the power output of three-degree point-absorbing wave energy converter

A Synthesis of Numerical Methods for Modeling Wave Energy Converter-Point Absorbers

A Novel Method for Predicting the Power Outputs of Wave Energy Converters

Design and Performance Evaluation of an Enclosed Inertial Wave Energy Converter with a Nonlinear Stiffness Mechanism