Abstract:Red mud, which could cause numerous problems to the environment, is a hazardous waste generated from the alumina smelting industry. In general, the storage and harmless utilization of red mud are hard to implement due to its fine particle size and high alkalinity. This study put forward a novel process to separate iron (MgFe2O4) and alumina (Al2O3) in red mud by a magnetization sintering method. The magnesium oxide was added to transform the nonmagnetic Fe2O3 into magnetic MgFe2O4 to achieve physical separation of iron-bearing minerals, and the alumina-bearing minerals were converted into dissoluble NaAlO2 minerals in a one-step reaction. The atmospheric pressure leaching process was adopted in this study for alumina resource recovery. To achieve clean alumina production, the silicate in the leaching solution was removed by adding the slightly soluble CaSO4, and the entire process becomes clean and harmless. The feasibility of the process was verified by thermodynamic analysis, and a series of experiments were performed to detect the optimum MgO/(Fe2O3 + MgO) ratio and the calcining and leaching conditions. The morphological and mineralogical characteristics of modified red mud, leaching red mud, and magnetic separation product were studied by X-ray diffraction analysis (XRD) and scanning electron microscopy (SEM) energy dispersive spectroscopy (EDS). It was observed that under the optimal conditions with MgO/(Fe2O3 + MgO) of 14.89% to recover iron and aluminum, the corresponding recovery rates were 67.54% and 73.01% respectively, and the iron grade was 30.46%. The EDS results showed that the obtained Mg/Fe ratio of the magnetic separation product was 0.4677–0.528, which is slightly different from that of the standard MgFe2O4 at 0.5. This new method can promote the development of comprehensive utilization of red mud and iron production.

An Efficient Dealkalization of Red Mud Through Microwave Roasting and Water Leaching

An Eco-Friendly Acid Leaching Strategy for Dealkalization of Red Mud by Controlling Phase Transformation

Clean dealkalization technology from aluminum industry hazardous tailings—red mud by displacement with Mg-based agent

Staged leaching behavior of red mud during dealkalization with mild acid

Reductive roasting of red mud with carbon and sulfuric acid dissolution of iron and aluminum: Transformation phases and leaching characteristics

Staged characteristics of red mud dealkalization by CO2 and SO2

Red mud with enhanced dealkalization performance by supercritical water technology for efficient SO 2 capture

Study on the Dealkalization Technics of Bayer-process Red Mud with CO_2 by Carbonation

High‐efficiency Preparation of Fe–Al Based Flocculants from Red Mud by Microwave Selective Carbothermic Reduction and Magnetic Separation

Comprehensive Utilization of Al-Goethite-Containing Red Mud Treated Through Low-Temperature Sodium Salt-Assisted Roasting–Water Leaching

Stepwise extraction of valuable components from red mud based on reductive roasting with sodium salts

Study on Magnetization Roasting Kinetics of High-Iron and Low-Silicon Red Mud

Extraction of Fe and Al from red mud using carbothermic reduction followed by water leaching

Selective extraction of sodium from red mud by dry digestion

Extraction of Aluminum and Preparation of Polymerized Aluminum Ferric Sulfate from Red Mud

Utilization of Red Mud with High Radiation for Preparation of Autoclaved Aerated Concrete (AAC): Performances and Microstructural Analysis

Extraction of Iron and Alumina from Red Mud with a Non-Harmful Magnetization Sintering Process

Efficient dealkalization of red mud and recovery of valuable metals by a sulfur-oxidizing bacterium

A novel process for one-step preparing potassium-containing fertilizer using red mud or CFA synergistic extraction of alumina

Carbothermal reduction of red mud for iron extraction and sodium removal

Efficient utilization of red mud waste via stepwise leaching to obtain α-hematite and mesoporous γ-alumina