Abstract:Porous carbon doped with transition metal oxides is rapidly becoming a key research topic in capacitive deionization desalination. This work reports a simple method for the synthesis of rGO doped with different ratios of nickel and cobalt oxides, i.e., 0, 10, 15, 25, 50, 75, and 100 wt%. The nanocomposite material was prepared via a modified Hammer`s method, followed by a hydrothermal doping process. The prepared samples were characterized using the X-Ray diffractometer (XRD), scanning electron microscope, energy-dispersive X-ray spectroscopy (EDX), transmission electron microscopy (TEM), and Fourier transform infrared spectroscopy. TEM images revealed the arbitrary distribution of nickel and cobalt oxides in the rGO layer with an average particle size of 13 nm. The performance of the prepared materials was investigated ex situ, i.e., using a typical three-electrode cell. Also, it was verified in situ during the cell operation, i.e., using a two-electrode cell. Results showed that the performance of rGO was improved in the presence of Co3O4 and NiO nanoparticles as they form ternary Co3O4/NiO/rGO composites. Both XRD and EDX analyses confirmed the presence of Ni and Co in oxide form and attached to the rGO. The three-electrode cell measurements were from − 0.6 to 0.6 V in 1 M aqueous NaCl. The electrochemical measurements demonstrated that the rGO-25Ni, rGO-25Co, and rGO-15(50Ni-50Co) electrodes exhibited the best capacitive performance. Those samples achieved specific capacitances as high as 357 F g−1, 368.7 F g−1, and 461.5 F g−1, respectively. Such values are higher than those of electrodes based on rGO (82.77 F g−1), nickel oxide (2.98 F g−1), and cobalt oxide (3.8 F g−1). Better performance has been achieved using an equal ratio of bimetallic oxide loaded into the rGO than the single oxides or other ratios.

Preparation of a Polypyrrole/Graphene Oxide Composite Electrode by Electrochemical Codeposition for Capacitor Deionization

Facile Fabrication Of Graphene-Polypyrrole-Mn Composites As High-Performance Electrodes For Capacitive Deionization

A novel composite electrode with multiple pore structures for efficient treatment of heavy metal ions in capacitive deionization

Electrodeposition nanofabrication of graphene oxide/polypyrrole electrodes with high hybrid specific capacitance for enhancing U(VI) electrosorption

Electro-assisted Adsorption of Cs(I) and Co(II) from Aqueous Solution by Capacitive Deionization with Activated Carbon Cloth/graphene Oxide Composite Electrode.

Three-dimensional graphene oxide/polypyrrole composite electrodes fabricated by one-step electrodeposition for high performance supercapacitors

Facile Preparation of Polypyrrole/graphene Oxide Nanocomposites with Large Areal Capacitance Using Electrochemical Codeposition for Supercapacitors

Nitrogen-Doped Graphene Composites As Efficient Electrodes with Enhanced Capacitive Deionization Performance

Fabrication of Graphene-Based Xerogels for Removal of Heavy Metal Ions and Capacitive Deionization

Electrospun Composites Made of Reduced Graphene Oxide and Activated Carbon Nanofibers for Capacitive Deionization

Graphene Oxide-Embedded Porous Carbon Nanofiber Webs by Electrospinning for Capacitive Deionization

Preparation of MOF/polypyrrole and flower-like MnO2 electrodes by electrodeposition: High-performance materials for hybrid capacitive deionization defluorination

Fabrication of Mesoporous Graphene Electrodes with Enhanced Capacitive Deionization

[Intensified Electrosorption of Pb2+ by 2,6-diaminoanthraquinone/Graphene Composite Electrode]

Multiwalled Carbon Nanotubes/Polypyrrole/Graphene/Nonwoven Fabric Composites Used As Electrodes of Electrochemical Capacitor

Ethylene glycol reduced graphene oxide/polypyrrole composite for supercapacitor

Biobased polyporphyrin derived porous carbon electrodes for highly efficient capacitive deionization

Fabrication of an Efficient Hierarchical Mesoporous 2D-Mos2/cnt/polypyrrole Based Composite Electrodes for Competitive and Selective U6+ Removal Using Capacitive Deionization: Mechanistic Evaluation Through Cyclic Voltammetry

Fabrication of an efficient hierarchical mesoporous 2D-MoS 2 /CNT/polypyrrole based composite electrodes for competitive and selective U 6+ removal using capacitive deionization: Mechanistic evaluation through cyclic voltammetry

Intensified Electrosorption of Pb2+ by 2, 6-diaminoanthraquinone/Graphene Composite Electrode

Synthesis of single and bimetallic oxide-doped rGO as a possible electrode for capacitive deionization