Abstract:Wood-based composites are increasingly used in the industry not only because of the shortage of solid wood, but above all because of the better properties, such as high strength and aesthetic appearance compared to wood. Medium-density fiberboard (MDF) is a wood-based composite that is widely used in the furniture industry. In this work, an attempt was made to predict the surface roughness of the machined MDF in the milling process based on acceleration signals from an industrial piezoelectric sensor installed in the cutting zone. The surface roughness parameter Sq was adopted for the evaluation and measurement of surface roughness. The surface roughness prediction was performed using a radial basis function (RBF) artificial neural network (ANN) and a Takagi-Sugeno--Kang (TSK) fuzzy model with subtractive clustering. In the research, as inputs to the ANNs and fuzzy model, the kinematic parameters of the cutting process and selected measures of the acceleration signal were adopted. At the output, the values of the surface roughness parameter Sq were obtained. The results of the experiments show that the surface roughness is influenced not only by the kinematic parameters of the cutting, but also by the vibrations generated during the milling process. Therefore, by combining information on the cutting kinematics parameters and vibration, the accuracy of the surface roughness prediction in the milling process of MDF can be improved. The use of TSK fuzzy modelling based on the subtractive clustering method for integrating the information from many acceleration signal measurements in the examined range of cutting conditions meant the surface roughness was predicted with high accuracy and high reliability. With the help of two tested artificial intelligence tools, it is possible to estimate the surface roughness of the workpiece with only a small error. When using a radial neural network, the root mean square error for estimating the value of the Sq parameter was 0.379 μm, while the estimation error based on fuzzy logic was 0.198 μm. The surface of the sample made with the cutting parameters vc = 76 m/min and vf = 1200 mm/min is characterized by a less concentrated distribution of ordinate densities, compared to the surface of the sample cut with lower feed rates but at the same cutting speed. The most concentrated distribution of ordinate density (for the cutting speed vc = 76 m/min) is characterized by the surface, where the feed rate value was vf = 200 mm/min, with 90% of the material concentrated in the profile height of 28.2 μm. When using an RBF neural network, the RMSE of estimating the value of the Sq parameter was 0.379 μm, while the estimation error based on fuzzy logic was 0.198 μm.

Computer vision measurement and optimization of surface roughness using soft computing approaches

Adaptive network-based fuzzy inference system with leave-one-out cross-validation approach for prediction of surface roughness

Prediction of surface roughness in CNC end milling by machine vision system using artificial neural network based on 2D Fourier transform

Analysis on significance of various statistical texture features in vision-based surface roughness prediction in end milling process

Artificial intelligence for automatic prediction of required surface roughness by monitoring wear on face mill teeth

Characterization and assessment of surface roughness using novel data representation methods

An Advanced Approach for Predicting Workpiece Surface Roughness Using Finite Element Method and Image Processing Techniques

The use of support vector machine, neural network, and regression analysis to predict and optimize surface roughness and cutting forces in milling

Texture Feature Similarity-Based Roughness Intelligent Evaluation: A Case Study Applied to Milled Surfaces

The Use of a Radial Basis Function Neural Network and Fuzzy Modelling in the Assessment of Surface Roughness in the MDF Milling Process

Study on Analytical Model of Surface Roughness Prediction in NC Machining

Towards AI driven surface roughness evaluation in manufacturing: a prospective study

Automatic Non-Contact Grinding Surface Roughness Measurement Based on Multi-Focused Sequence Images and CNN

Prediction of surface roughness in CNC face milling using neural networks and Taguchi's design of experiments

Image-processing-based model for surface roughness evaluation in titanium based alloys using dual tree complex wavelet transform and radial basis function neural networks

Optimization of surface roughness in ball-end milling using teaching-learning-based optimization and response surface methodology

Investigation and analysis of surface roughness in machining carbon fiber reinforced polymer composites using artificial intelligence techniques

Surface roughness predictive modeling: neural networks versus regression

Surface roughness measurement based on laser speckle and neural network

Multiobjective Optimization of Surface Roughness and Tool Wear in High-Speed Milling of AA6061 by Machine Learning and NSGA-II

NASPrecision: Neural Architecture Search-Driven Multi-Stage Learning for Surface Roughness Prediction in Ultra-Precision Machining