Abstract:Ground lifetime test is the most crucial experiment to assess the performance, reliability, and flight qualification of electric propulsion, and it can bring new insights for understanding the operation characteristics. This work demonstrates a full lifetime test of 140000 cycles on a Micro-Cathode-Arc Thruster (μCAT) with 160 μs charging time and 86 mJ charging energy. A four-probe resistivity measurement method is utilized to investigate variations in the conductive film thickness and resistivity throughout the thruster lifespan. Direct film parameters show that the lifetime of the μCAT can be divided into three stages. In the initial stage, the film thickness decreases by 1.2 μm and the resistivity increases significantly due to the high discharge intensity and intense film ablation; In the steady stage, the change of the film thickness is within 5%, and the resistivity of the film increases slowly from 0.050 Ω·mm to 0.223 Ω·mm. In the end stage, the resistivity exponentially increases from 0.223 Ω·mm to 1.176 Ω·mm, with the increase accounting for 81%, ultimately resulting in the failure of the thruster open circuit. Additionally, the evolution of discharge parameters, and the variation of plume parameters are measured throughout the lifetime. The discharge characteristics also show significant differences in the duration of voltage and current in these three stages. The results of plume shape and plasma parameters are also well consistent with the discharge parameters and film state. These results suggest that, for evaluating the steady stage lifetime of thrusters, the film thickness is the best indicator compared to the variations in resistivity and voltage-current characteristics. For the end stage, the plasma plume morphology, discharge duration, and plume parameters can conveniently and clearly characterize the thruster failures and irregularity.

Investigation and experimental simulation of performance deterioration of microwave discharge ion thruster μ10 during space operation

Performance improvement of the μ10 microwave discharge ion thruster by expansion of the plasma production volume

Performance characterization of a miniature microwave discharge ion thruster operated with water

Numerical investigation of plasma properties for the microwave discharge ion thruster μ10 using PIC-MCC simulation

The KM-10 Hall-Effect Thruster: Development Status and Application Prospects

Numerical Analysis of a Miniature Microwave-discharge Ion Thruster Using Water as the Propellant

A study of grid failure mode drivers and methods for accelerated life testing of a 30 cm diameter ion thruster

Water and xenon ECR ion thruster—comparison in global model and experiment

Numerical and experimental research on the performance of an iodine-fed Hall thruster

Kinetic investigation of discharge performance for Xe, Kr, and Ar in a miniature ion thruster using a fast converging PIC-MCC-DSMC model

Safety scenario and integrated thermofluid test

Research on the life-limiting sputtering mechanism of 30 cm ion thruster

Experimental study on beam characteristics of μHT-1 thruster under operating conditions adjustment

The Reliability Modeling and Evaluation of a Cusped Field Thruster When Undertaking a Gravitational Wave Detection Mission

Full lifetime demonstration of a Micro-Cathode-Arc thruster evolution characteristics

The impact of neutralizer-free ignition of a radio frequency ion thruster on the lifetime of the ion optics system

Experimental and Numerical Studies of Ammonium Dinitramide Based Liquid Propellant Combustion in Space Thruster

Investigation of the power transfer efficiency in an air-breathing radio frequency ion thruster

Effect of ion beam extraction on neutral density distribution inside a gridded microwave discharge ion thruster

Thrust Enhancement of a Microwave Ion Thruster

Reliability evaluation of spacecraft power generation performance with competitive failure processes under irradiation