Abstract:High loading cathode with high active material proportion is a practical demand but far below the desirable value to achieve high energy density lithium-ion batteries (LIBs). Normally, the Li + /electron transport between active materials and electrolyte/carbon, however, it is poor and areal resistance is extremely high for a high loading/thick cathode. In this manuscript, taking high-voltage lithium cobalt oxide LiCoO 2 (LCO) as an example, we design a facile liquid metal welding method enabled by a low melting-point indium-tin oxide In 2 O 3 /SnO 2 (ITO) during a thermal treatment process, the strongly adhesion active particles show robust mechanical property for the free-standing LCO cathode with a pellet architecture. We also demonstrate that the O 2 atmosphere plays a critical role on the interfacial property, that is preventing the layered structure to rock-salt Co 3 O 4 as well as further enhancing the interfacial mechanical integration. As expected, the LCO-ITO free-standing cathode not only shows robust mechanical property with densely packed configuration but also provides a fast Li + /electron pathway at the interface. Consequently, the LCO-ITO composite cathode exhibits excellent electrochemical cycling performance in both liquid and solid-state cells. For example, even at a high active material mass of 56 mg·cm −2 , the LCO cathode still delivers a specific capacity of 151 mAh·g −1 and maintains 132.5 mAh·g −1 (corresponding to 7.4 mAh·cm −2 ) after 80 cycles. The LCO-ITO-O 2 cathode is also applicable to a solid-state cell, which exhibits a high capacity of 100.4 mAh·g −1 after 200 cycles of long-term cycling. The excellent electrochemical of the LCO-ITO-O 2 reveals the successful engineering mechanical architecture and interfacial carriers transport, which may be expected as an alternative approach to achieve high energy density LIBs.

Tissue Matrices Scaffold for the Preparation of Lithium Cobalt Oxide

Cathode Materials of Li_xCo_(0.8)Ni_(0.2)O_2 for Lithium-ion Battery

Structural Analysis and Electrochemical Studies of Carbon Coated Li4ti5o12 Particles Used As Anode for Lithium Ion Battery

Facile Synthesis of A Mesoporous Co3o4 Network for Li-Storage Via Thermal Decomposition of an Amorphous Metal Complex

From Metal to Cathode Material: in situ Formation of LiCoO2 with Enhanced Cycling Performance and Suppressed Phase Transition

Characteristics and properties of nano-LiCoO2 synthesized by pre-organized single source precursors: Li-ion diffusivity, electrochemistry and biological assessment

Chemical synthesis and steady state characterization of a nanocrystalline lithium cobalt oxide

Competition between dissolution vs. ion exchange during low temperature synthesis of LiCoO2 on carbon scaffolds

Thin-Film Lithium Cobalt Oxide for Lithium-Ion Batteries

Liquid metal welding enabling high loading binder/carbon-free layered oxide cathode toward high-performance liquid and solid-state battery

Mechanochemical Reduction and Doping of Cobalt (II,III) Oxide (Co3O4) by Lithium Metal: A Facile Route to LixCoyO Materials

Biomimetic Synthesis of Metal Ion-Doped Hierarchical Crystals Using A Gel Matrix: Formation of Cobalt-Doped Limn2o4 with Improved Electrochemical Properties Through A Cobalt-Doped Mnco3 Precursor

Scalable Precursor-Assisted Synthesis of a High Voltage LiNiyCo1-yPO4 Cathode for Li-Ion Batteries

Controllable synthesis of carbon supported cobalt monoxide anode and high-voltage lithium cobalt oxide cathode with enhanced lithium-ion storage

First-Principles Study of Lithium Cobalt Spinel Oxides: Correlating Structure and Electrochemistry

Simultaneous Near‐Surface Trace Doping and Surface Modifications by Gas–Solid Reactions during One‐Pot Synthesis Enable Stable High‐Voltage Performance of LiCoO2

Simple Solid-State Method for Synthesis of Li[Li 0.20 Mn 0.534 Ni 0.133 Co 0.133 ]O 2 Cathode Material with Improved Electrochemical Performance in Lithium-Ion Batteries

Nitrogen-doped carbon and high-content alumina containing bi-active cobalt oxides for efficient storage of lithium

Long‐Term Highly Stable High‐Voltage LiCoO2 Synthesized via a Solid Sulfur‐Assisted One‐Pot Approach

A new surface phase of Al2Ti7O15 to enhance the electronic conductivity and interfacial stability of LiCoO2 cathode materials

Highly active cathode material LiCoO_2 for lithium ion battery through β-Co(OH)_2 as precursors