Abstract:On the basis of damage mechanics, a 2D fracture propagation model for seepage-stress-damage coupling in multi-fracture shales was established. Numerical simulations of hydraulic fracture propagation in the presence of natural fractures were carried out, with the use of mechanical parameters of shale reservoirs. The results showed that when hydraulic fractures encountered natural fractures in a shale reservoir, the morphology of fracture propagation was jointly affected by the properties of natural fractures (permeability and mechanical properties of rocks), approaching angle, horizontal stress difference, and flow rate of fracturing fluids. At a small horizontal stress difference, or low approaching angle, or small friction coefficient, natural fractures had increased potential to be damaged due to shear and tension. In such cases, the hydraulic fractures tended to propagate along the natural fractures. As the flow rate of fracturing fluid increased and the width of hydraulic fractures expanded, branch fractures formed easily when the net pressure exceeded the sum of horizontal stress difference and tensile strength of the rocks in which natural fractures with approaching angle smaller than 60° existed. It is seen, a high flow rate will increase the complexity of fracture network. However, when a large number of natural fractures with approaching angles greater than 60° existed, a large flow rate generally led to propagation of hydraulic fractures beyond natural fractures, which was not favored. Hence, an appropriate flow rate should be selected based on the orientations of natural fractures and hydraulic fractures. At the early stage of hydraulic fracturing, a low flow rate was favorable for the initiation of natural fractures and the growth of complexity of regional fractures near the well. Later, a higher flow rate facilitated a further propagation of hydraulic fractures into the depth of reservoir, thus forming a network of fractures. The underlying control mechanism of flow rate and net pressure on the formation of fracture network still requires clarification. The bending degree of the fracture propagation path depended on the ratio of net pressure to stress difference at a distant point as well as on the spacing between fractures. When the horizontal stress difference (<9 MPa) or coefficient of horizontal stress difference (<0.25) was low, the ratio of net pressure to stress difference was high. In this case, the fracture-induced stress obtained an enhanced significance, while the interactions of hydraulic fractures intensified, leading to a non-planar propagation of fractures. In addition, a smaller spacing between fractures caused intensified interactions of hydraulic fractures, so the propagation path altered more easily. This work contributes to the prediction of morphology of fracture propagation in unconventional oil and gas reservoirs.

Effect of matching relation of multi-scale, randomly distributed pores on geometric distribution of induced cracks in hydraulic fracturing

Pore-Scale Simulation of Fracture Propagation by CO2 Flow Induced in Deep Shale Based on Hydro-Mechanical Coupled Model

Pore-scale modeling of hydromechanical coupled mechanics in hydrofracturing process: Mechanics in Hydrofracturing

Effect of Reservoir Porosity and Clay Content on Hydraulic Fracture Height Containment

Simulation of Key Influencing Factors of Hydraulic Fracturing Fracture Propagation in a Shale Reservoir Based on the Displacement Discontinuity Method (DDM)

Analytical Model of Hydraulic Fracturing for Low Permeability Hot Dry Rock Reservoirs and DEM Simulation Base on Fluid-Solid Coupling

Numerical simulation of multi-fracture uniform propagation in naturally fractured reservoirs based on the continuum–discontinuum method

Numerical study of hydraulic fractures propagation in deep fracture-cavity reservoir based on continuous damage theory

The Analysis of Hydraulic Fracture Morphology and Connectivity under the Effect of Well Interference and Natural Fracture in Shale Reservoirs

Numerical Simulation of the Fracture Propagation Mechanism during Supercritical Carbon Dioxide Fracturing in Shale Reservoirs

Numerical simulation of hydraulic fracture propagation in shale gas reservoir

Numerical Simulation on Cracked Shale Oil Reservoirs Multi-cluster Fracturing Under Inter-well and Inter-cluster Stress Interferences

Microscale crack propagation in shale samples using focused ion beam scanning electron microscopy and three-dimensional numerical modeling

A hydraulic-mechanical coupled triple porosity fractal model considering action mechanisms and gas transport mechanisms in carbon-hydrogen reservoirs

Coupled Geomechanics and Fluid Flow Modeling for Petroleum Reservoirs Accounting for Multi-Scale Fractures

Distribution Relationship of Pore Pressure and Matrix Stress during Hydraulic Fracturing

Numerical Simulation of Multicrack Propagation Dynamics in Supercritical CO 2 Fracturing of Tight Reservoirs

Study on the Interaction Mechanism of Hydraulic Fracture and Natural Fracture in Shale Formation

Hydraulic Fracturing Mechanism of Rock Mass under Stress-Damage-Seepage Coupling Effect

Numerical study of hydraulic fracturing on single-hole shale under fluid–solid coupling

A Numerical Method for Simulating Planar 3D Multi-Fracture Propagation in Multi-Stage Fracturing of Horizontal Wells