Abstract:The precipitation of wax at low temperature often leads to the viscosity increase of waxy crude oil, and even causes the blockage of pipelines in severe cases. The addition of polymer additives is an effective method for inhibiting wax precipitation. In the present work, poly(styrene-octadecyl acrylate)s with low crosslinking density were prepared through microemulsion polymerization, with styrene and octadecyl acrylate as monomers and N -(hydroxyethyl) acrylamide (NMA) as the crosslinking agent. The chemical structures and molecular weights of polymers were characterized by Fourier transform infrared spectroscopy and gel permeation chromatography, respectively. The crosslinking densities (CLD) of polymers were determined in the range of 1.32 × 10 −4 to 4.66 × 10 −4 cm 3 /mol by the dissolution equilibrium method. Waxy model oils were prepared to explore the crosslinked polymers on the wax crystallization behaviors by using X-ray diffraction (XRD) approaches and isothermal crystallization kinetics (ICK). As the CLD of polymers increases to 1.99 × 10 −4 cm 3 /mol, the crystallinity index (CI), grain size, and structural strength of the wax crystals decrease. However, as the CLD of polymers is further increased to 4.66 × 10 −4 cm 3 /mol, all of the above parameters increase, due to the deterioration of the co-crystallization ability of polymers. In the ICK tests, The Avrami index n of the model oil samples increases from 1.94 to 2.43 as the CLD increases, implying that the nucleation effect of polymers is increased. The effect of CLD on the cold flowability of Inner Mongolia crude oil was investigated by pour point test, rheology, differential scanning calorimeter (DSC), and polarized light microscopy (PLM). The results show that the pour point, viscosity, yield stress, thixotropic ring area, cumulative wax precipitation and wax crystal size of the crude oil decrease when the CLD of polymers increases to 1.99 × 10 −4 cm 3 /mol. However, if the CLD is further increased to 4.66 × 10 −4 cm 3 /mol, all of the parameters increase. Consequently, the mechanism for the improvement of waxy crude oil by mildly crosslinked polymer is proposed.

Study on the influence of low-carbon alcohol on non-hydrodewaxing reaction of hydrocracking tail oil

Study on hydroformylation synthesis of higher alcohol with olefins from paraffin cracking

Influence of temperature, residence time, and solvent/feedstock mass ratio on overall product distribution and oil products quality in ethanol liquefaction of 230 polypropylene impact copolymer

Preparation of Α-Olefins Through the Steam Cracking Process of Wax from Coal Liquefaction

Effect of a new nano‐viscosity reducing agent on the rheological properties and wax deposition characteristics of waxy crude oil

Optimizing the low‐temperature performance of high‐wax‐content crude oil with emulsion‐based wax inhibitors: Mechanisms and efficacy

Study on the technology of thermal cracking of paraffin to alpha olefins

Study on Preparation of Fuel Oil from Three Kinds of Molecular Sieve Catalytic Cracking Waste Lubricating Oil

Hydroisomerization Property of Hydrocracking Tail Oil

The effect of mild hydrogenation on the catalytic cracking of bio-oil for aromatic hydrocarbon production

Influence of reservoir minerals and ethanol on catalytic aquathermolysis of heavy oil

Study on optimized culture of microbial strains and their ability in wax removal and viscosity reduction of paraffin-based crude oil

Enhancement of cold flowability for high waxy crude oil by the mildly crosslinked poly(styrene-octadecyl acrylate)

Effect of Normal Paraffin Content on Ethylene Yield and Feedstock Allocation of Ethylene Pyrolysis Process

STUDY OF VISCOSITY-TEMPERATURE AND THERMAL RESPONSE CHARACTERISTICS OF BIO-OIL MIXED WITH LOW MOLECULAR WEIGHT ALCOHOLS

Upgrading of low-boiling fraction of bio-oil in supercritical methanol and reaction network.

Effect of Different Preparation Methods on the Stability of Low-Carbon Alcohol Blended Fuels

Hydroisomerization and Hydrocracking of Hydrocracker Bottom for Producing Lube Base Oil

Author Response for "optimizing the Low‐temperature Performance of High‐wax‐content Crude Oil with Emulsion‐based Wax Inhibitors: Mechanisms and Efficacy"

Effect of alcohol type and amount on the total energy consumption and yield of the free fatty acids esterification reaction with simultaneous adsorptive water removal

The effect of alkanol chain on the interfacial composition and thermodynamic properties of diesel oil microemulsion