Abstract:This study employed a viscoplastic finite element model and re-meshing technique to investigate the thermomechanical response of 7055 aluminum alloy during friction stir welding (FSW). The stirring pin rotates at 800-1200 rpm and moves at 80-120 mm/min (i.e., welding speed) during the FSW process. The temperature field and viscoplastic flow were mathematically modeled based on a computational solid mechanics method and predicted by a three-dimensional coupled thermomechanical numerical simulation. To validate the simulation results, real-time temperature measurements at the welded joint were acquired via thermocouples embedded in the plate prior to the welding process. Additionally, optical microscopy and electron backscatter diffraction techniques were used to examine the metallographic structure and grain orientation of the welds, respectively. The results revealed a temperature difference of 5-10 celcius between the advancing and retreating sides of the plate. The material on the advancing side was extruded upward in a circular motion and eventually reached the surface. Meanwhile, the material on the retreating side moved half a revolution around the pin and remained at the original depth of the plate. Complete dynamic recrystallization occurred in the weld nugget, resulting in the formation of fine equiaxed grains with random orientation. In the thermomechanically affected zone, the proximity to the weld nugget was associated with an increased proportion of high-angle grain boundaries and recrystallized structures. Simultaneously, the intensity of the deformation texture decreased, while the recrystallized texture showed an initial strengthening followed by a subsequent weakening. This comprehensive investigation contributes to a deeper understanding of the thermomechanical behavior and metallographic characterization of 7055 aluminum alloy during the FSW process.

Influence of friction stir welding process parameters on mechanical properties and structure formation of 35-mm-Thick aluminum-magnesium alloy weld

The Effect of Tool Rotation on Structure and Mechanical Properties in Friction Stir Welding Of Aluminum AA5052

On the role of input welding parameters on the microstructure and mechanical properties of Al6061-T6 alloy during the friction stir welding: Experimental and numerical investigation

Parametric effect on microstructure evolution, grain size and mechanical behaviour of friction stir butt welding of AA6061-T6 alloy

Retention of Fine Grained Microstructure of Equal Channel Angular Pressed Aluminum Alloy 1050 by Friction Stir Welding

Microstructure and mechanical properties of double side friction stir welded AA 7075 aluminum alloy

Influence of Refill Friction Stir Spot Welding Technique on the Mechanical Properties and Microstructure of Aluminum AA5052 and AA6061-T3

Tensile and wear behaviour of friction stir welded AA5052 and AA6101-T6 aluminium alloys: effect of welding parameters

Thermomechanical Behavior and Microstructural Characteristics of 7055 Aluminum Alloy During Friction Stirring Welding

Influence of Friction Stir Welding on Mechanical Properties of Butt Joints of AZ61 Magnesium Alloy

Effects of parameters on friction stir welding process of AA 7075 aluminum alloy: mechanical and microstructural assessments

Influence of Welding Speed on Microstructure and Mechanical Properties of 5251 Aluminum Alloy Joints Fabricated by Self-Reacting Friction Stir Welding

Experimental investigation and optimization of mechanical properties on combination of higher and lower strength of aluminum alloys

Material Flow Behavior and Thermal Cycle during Friction Stir Welding of AA5083/AZ91 Dissimilar Metals

Study on the effect of the welding environment on the dynamic recrystallization phenomenon and residual stresses during the friction stir welding process of aluminum alloy

Influence of Process Parameters on the Mechanical Properties and Corrosion Resistance of Dissimilar Friction Stir Welded Joints of AA2024-O and AA6061-O Aluminum Alloys

Mechanical Properties and Microstructure of 6082-T6 Aluminum Alloy Joints by Self-support Friction Stir Welding

An Experimental Study On Friction Stir Welding Of Aluminum-Magnesium Alloys For Improved Mechanical Properties Of Tailor Welded Blanks.

Microstructure, microhardness and mechanical behavior of dissimilar AA7075/AA6061 alloys under friction stir welding

Effect of Welding Speed on Microstructure and Mechanical Properties of Self-Reacting Friction Stir Welded 6061-T6 Aluminum Alloy

Friction Stir Welding of AZ31B Magnesium Alloy with 6061-T6 Aluminum Alloy: Influence of Processing Parameters on Microstructure and Mechanical Properties