Abstract:Purpose The purpose of this study is to design a flight control model for a control surface-less (CSL) tri-tilt-rotor (TTR) unmanned aerial vehicle (UAV) based on a Proportional Integral Derivative (PID) controller to stabilize the altitude and attitude of the UAV subjected to various flying conditions. Design/methodology/approach First, the proposed UAV with a tilting mechanism is designed and analyzed to obtain the aerodynamic parameters. Second, the dynamics of the proposed UAV are mathematically modeled using Newton-Euler formation. Then, the PID controller is implemented in the simulation model to control flight maneuvers. The model parameters were implemented in a mathematical model to find the system’s stability for various flight conditions. The model was linearized to determine the PID gain values for vertical take-off and landing, cruise and transition mode. The PID controller was tuned to obtain the desired altitude and attitude in a short period. The tuned PID gain values were implemented in the PID controller and the model was simulated. Findings The main contribution of this study is the mathematical model and controller for a UAV without any control surface and uses only a thrust vector control mechanism which reduces the complexity of the controller. The simulation has been carried out for various flight conditions. The altitude PID controller and the attitude PID controller for CSL-TTR-UAV were tuned to obtain desired altitude and attitude within the optimum duration of 4 s and deviation in the attitude of 8%, which is within the allowable limit of 14%. The findings obtained from the simulation revels that the altitude and attitude control of the CSL-TTR-UAV was achieved by controlling the rpm of the rotor and tilt angle using the PID controller. Originality/value A novel CSL TTR UAV mathematical model is developed with a dual tilting mechanism for a tail rotor and single axis tilt for the rotors in the wing. The flight control model controls the UAV without a control surface using a PID controller for the thrust vector mechanism.

Low-Cost Educational Feedback Control System: Helicopter Tail Rotor for Yaw Control

Intelligent Rotor Speed Controller for a Mini Autonomous Helicopter.

Design and Realization of Attitude Stability Augmentation Control System for Mini Unmanned Helicopter

Full control of a quadrotor using parameter-scheduled backstepping method: implementation and experimental tests

Attitude Control and Low Cost Design of UAV Bicopter

Longitudinal dynamic modelling and control for a quad-tilt rotor UAV

Low-cost quadrotor hardware design with PID control system as flight controller

Control System Design and Flight Testing for a Miniature Unmanned Helicopter

Micro helicopter yaw control based on operator skill

Control and implemention on coordinated turn of miniature unmanned helicopter

Quadrotor Aircraft Design Based on the K60 Controller

Micro Helicopter Yaw Control Based on Human Operator's Skill

System Design of a Novel Tilt-Roll Rotor Quadrotor UAV

Design, Mathematical Modeling, and Control of an Underactuated 3-DOF Experimental Helicopter

Model-Based Design for a Self-Balancing Robot using the Arduino Micro-Controller Board

Design, modeling and simulation of a control surface-less tri-tilt-rotor UAV

Model- and Data-Based Control of Self-Balancing Robots: Practical Educational Approach with LabVIEW and Arduino

Model-free LQR based PID controller for trajectory tracking of 2-DoF helicopter: comparison and experimental results

Onboard Multivariable Controller Design for a Small Scale Helicopter Using Coefficient Diagram Method

Design of a low-cost mini quadrotor and altitude control using a micro laser sensor

Design and Application of an Electric Tail Rotor Drive Control (ETRDC) for Helicopters with Performance Tests