Abstract:Accurate prediction of the self-propulsion performance is one of the most important factors for energy-efficient design of a ship. In general, the hydrodynamic performance of a full-scale ship could be achieved by model-scale simulation or towing tank test with extrapolations. With the development of CFD methods and computing power, directly predict ship performance with full-scale CFD is an important approach. In this article, a numerical study on the full-scale self-propulsion performance with propeller operating behind ship at model- and full-scale is presented. The study includes numerical simulations using RANS method with double-model and VOF model respectively and scale effect analysis based on overall performance, local flow fields and detailed vortex identification. Verification study on grid convergence is also performed for full-scale simulation with global and local mesh refinements. And a series of sea trail tests were performed to collect reliable data for the validation of CFD predictions. The analysis of scale effect on hull-propeller interaction shows that the difference on hull boundary layer and flow separation is the main source of scale effect on ship wake. And the results of the fluctuations of propeller thrust and torque along with circulation distribution and local flow field show that propeller’s loading is significantly higher for model-scale ship. It is suggested that the difference on vortex evolution and interaction is more pronounced and have larger effects on ship’s powering performance at model-scale than full-scale according to the simulation results. From the study on self-propulsion prediction, it could be concluded that the simplification on free surface treatment does not only affect the wave-making resistance for bare hull but also the propeller performance and propeller induced ship resistance which can produced up to 5% uncertainty to the power prediction. Roughness is another important factor in full-scale simulation because it has up to approximately 7% effect on the delivery power. As a result of validation study, the numerical simulations of full-scale ship self-propulsion shows good agreement with the sea trail data especially for cases that have considered both roughness and free surface effects. This result will largely enhance our confidence to apply full-scale simulation in the prediction of ship’s self-propulsion performance in the future ship designs.

Analysis of hull, propeller and engine interactions in regular waves by a combination of experiment and simulation

Impact of Propeller Emergence on Hull, Propeller, Engine, and Fuel Consumption Performance in Regular Head Waves

A comprehensive propulsion system analysis: an integrated approach utilising engine simulation and free-running model experiments

Coupling of RANS and BEM Solvers for Simulation of Propeller Behind the Hull in Full Appended Model

A study on interaction among hull, diesel engine and propellers of a twin-screw ship during turning circle maneuver

Predicting the Fuel Consumption of a Ship in Seaway Considering the Dynamic Interaction Among Environment-Hull-Propeller-Engine

Numerical Analysis of Full-scale Ship Self-Propulsion Performance with direct Comparison to Statistical Sea Trail Results

Investigations of Self-Propulsion in Waves of Fully Appended ONR Tumblehome Model

Simulations of Self-Propelled Fully Appended Ship Model at Different Speeds

Hydrodynamic Decomposition-Based Optimization of Ship’s Hull–Propeller System Under Multiple Operating Conditions

Propeller–hull interaction simulation for self-propulsion with sinkage and trim

Long-Term Prediction Of Speed Reduction Due To Waves And Fuel Consumption Of A Ship At Actual Seas

A Practical Method for Predicting the Propulsive Performance of Energy Efficient Ship with Wave Devouring Hydrofoils at Actual Seas

CFD Simulations of Self-Propulsion and Turning Circle Maneuver Up to 90º of Ship in Waves

Numerical Analysis on Self-Propulsion of a Waterjet-Propelled Ship with Different Propulsion Models

CFD Investigation on the Hydrodynamic Loads and Motions when Ship Maneuvers in Regular and Irregular Waves

Digital Simulation of Ship Power System With Electric Propulsion

Modeling and Simulation of Marine Electric Propulsion System

Analyzing the performance of hull and water jet propeller under mooring conditions: effects of shallow water depths and varying inflow speeds

A new method for optimal ship design in real sea states using the ship power profile

Predicting practical ship powering and speed loss in waves using added resistance test results