Abstract:The Ultra-short baseline (USBL) positioning system has important application in the positioning of underwater vehicles. The installation error angle of the USBL positioning system has an important influence on the positioning accuracy of USBL system. The traditional calibration methods have limited estimation accuracy for installation error angles and have high route requirements. To solve the above problems, a calibration method of installation error angle based on attitude determination is proposed in this paper. When strapdown inertial navigation system (SINS) and USBL are fixed together in the application process, the installation error angle of USBL is fixed and unchanged. Then the calibration of installation error angle can be accomplished with the idea of attitude determination. The vector observation model based on the installation error angle matrix is established first. Observation vectors are obtained by the relative position of transponders in the USBL coordinate frame. The reference vector is calculated by position of transponder, position and attitude of SINS and lever arm between SINS and USBL. By constructing the observation vectors and the reference vectors, the proposed method can calibrate the installation error angle of SINS and USBL in real time. The advantages of the proposed method are that it has no specific requirements for the calibration route and can calibrate the installation error angle in real time with high accuracy. In order to verify the performance of the proposed algorithm, simulation experiment and field experiment are carried out in this paper. The results of simulation experiment and field experiment show that the proposed method can give the estimated installation error angle of USBL in real time, and the estimated result is the best among several methods. The proposed method can not only achieve the calibration of the installation error angle in circular trajectory, but also in straight trajectory.

Hexahedral prism and IMU installation error calibration technique based on turntable transmission

A Three-dimension High-Precision and Non-contact Dynamic Angular Displacement Measurement System based on Heterodyne Interference

Three-dimensional Dynamic Non-Contact Attitude Detection System Based on Optical Path Deflection Technology

Rapid calibration based on SQP algorithm for coordinate frame of localizers

Calibration method of strapdown inertial measurement unit based on two-axis turntable

An SVD-based Turntable Calibration Method with Multiple Reference Planes Segmented from Point Clouds

Installation error calibration for MEMS angular measurement system in hypersonic wind tunnel

An Improved Fast Self-Calibration Method for Hybrid Inertial Navigation System under Stationary Condition

A Calibration Method for Misalignment Angle of Vehicle-mounted IMU

Analysis and calibration of the mounting errors between inertial measurement unit and turntable in dual-axis rotational inertial navigation system

MEMS-IMU automatic calibration system design and implementation

Research on Calibration Method of MEMS Gyroscope Mounting Error Based on Large-Range Autocollimator

An Installation Angle Error Calibration Method in an Ultra-Short Baseline System Based on a Dual Transponder

A New Self-Calibration and Compensation Method for Installation Errors of Uniaxial Rotation Module Inertial Navigation System.

Calibration of Three-Dimensional Integrated Sensors for Improved System Accuracy

A Calibration Method of USBL Installation Error Based on Attitude Determination

A Novel Method and System Implementation for Precise Estimation of Single-Axis Rotational Angles

A System-Level Self-Calibration Method for Installation Errors in A Dual-Axis Rotational Inertial Navigation System

A calibration approach for installation error of multi-axis laser interferometer

System-Level Calibration for the Star Sensor Installation Error in the Stellar-Inertial Navigation System on a Swaying Base.

Calibration Method of Accelerometer Based on Rotation Principle Using Double Turntable Centrifuge