Abstract:Interfacial localization of solar thermal energy conversion to drive evaporation is a promising water treatment technology, especially for gaining pure water in freshwater-deficient areas. Phoenix tree bark is chosen as the raw material mainly because of its low cost and renewability. The carbonized bark with broadened pore sizes possess efficient steam escape channels and light absorption structure. The film with a double-layer structure is constructed through converting the surface of the bark into the carbonized structure under controllable laser treatment. The evaporation efficiency is calculated to be 74% under 1 sun by enhancing the photothermal conversion ability and efficiently opening the surface water transport channels simultaneously. The distillation water exhibits large resistance values (9.65 MΩ) and low concentrations of four primary ions (Na+, K+, Mg2+, and Ca2+), which achieves international standard for drinking water. In addition, the carbonized bark also exhibits all-right purified performance toward water evaporation from dye wastewater. The low cost and clean technology provides new inspiration for the future development of applicable solar thermal energy-driven water treatment systems.This article has not yet been cited by other publications.

What problem does this paper attempt to address?

The problem that this paper attempts to solve is to develop an efficient and environmentally - friendly solar - driven interfacial evaporation technology to obtain pure water and treat wastewater. Specifically, the researchers selected phoenix tree bark as the raw material and transformed it into a carbonized structure through laser treatment, thereby constructing a thin film with a bilayer structure. This material can effectively absorb light energy and convert it into thermal energy under sunlight irradiation, and then drive the water evaporation process. ### Main problems and solutions 1. **Efficient solar - driven evaporation**: - Traditional methods have limitations in achieving efficient solar - driven evaporation, especially in the context of the need to obtain pure water in freshwater - scarce areas. - Solution: Transform phoenix tree bark into a carbonized structure through laser treatment to form a material with efficient vapor escape channels and light - absorbing structures. Experimental results show that under 1 sun intensity, the evaporation efficiency can reach 74%. 2. **Application of low - cost and renewable materials**: - Existing solar evaporation technologies often rely on expensive or unsustainable materials, increasing costs and technological complexity. - Solution: Use low - cost and renewable phoenix tree bark as the raw material, which not only reduces costs but also improves the sustainability and environmental friendliness of the material. 3. **Efficient seawater desalination and sewage treatment**: - Seawater desalination and sewage treatment require efficient and economical technologies to meet drinking water standards. - Solution: Research shows that the distilled water after treatment has a relatively high resistance value (9.65 MΩ) and low concentrations of major ions (Na⁺, K⁺, Mg²⁺, Ca²⁺), which meets international drinking water standards, and also has a good purification effect on dye wastewater. ### Formula representation - Evaporation efficiency calculation formula: \[ \eta=\frac{m h_{lv}}{P_{in}} \] where: - \( \eta \) is the energy conversion efficiency, - \( m \) is the mass flow rate of steam, - \( h_{lv} \) is the enthalpy of phase change from liquid to gas, - \( P_{in} \) is the received solar irradiance power density. In summary, this research provides an efficient, low - cost and environmentally - friendly solar - driven evaporation technology through innovative material selection and treatment methods, providing new ideas for solving water shortage and environmental pollution problems.

Carbonized Bark by Laser Treatment for Efficient Solar-Driven Interface Evaporation

Laser-engraved wood-based evaporators: A sustainable approach for solar interfacial evaporation

Mechanically robust biomass-derived carbonaceous foam for efficient solar water evaporation

Biomass Waste‐Derived Solar Evaporator for Efficient and Low‐Cost Water Evaporation

Alkali treatment combined with surface carbonized wood for high-efficiency solar interfacial evaporation

Multi-Shelled Hollow Porous Carbon Nanospheres-Based Evaporator for Highly Efficient Solar-Driven Desalination

A low-cost carbonized Enteromorpha–coated wood for highly efficient solar-driven interfacial water evaporation

Laser-treated wood for high-efficiency solar thermal steam generation

Bio-derived carbon-based materials with high photothermal conversion and microstructure transport channels for efficient solar evaporation and water treatment

Chemical Treatment of Biomasswastes As Carbon Dot Carriers for Solar-Driven Water Purification.

A Bilayered Wood-Poly(3,4-ethylenedioxythiophene):Polystyrene Sulfonate Hydrogel Interfacial Evaporator for Sustainable Solar-Driven Sewage Purification and Desalination

Efficient solar-driven freshwater generation through an inner hierarchical porous metal-carbon layer bridging synergistic photothermal evaporation and adsorption-photodegradation

An arch-shape wood evaporator decorated by metal-organic framework for solar interface evaporation

Carbon foam directly synthesized from industrial lignin powder as featured material for high efficiency solar evaporation

High-performance bilayer solar evaporators constructed by candle-derived carbon nanoparticle/wood hybrid

Chemical treatment of biomass wastes as carbon dot carriers for solar-driven water purification

Photothermal-Photocatalytic CSG@ZFG Evaporator for Synergistic Salt Rejection and VOC Removal during Solar-Driven Water Distillation

Bio-Derived Photothermal Materials and Evaporators for Sustainable Solar Energy-Driven Water Process

A Simple and Efficient Solar Interfacial Evaporation Device based on Carbonized Cattail and Agarose Hydrogel for Water Evaporation and Purification

Simulation‐Guided Design of Bamboo Leaf‐Derived Carbon‐Based High‐Efficiency Evaporator for Solar‐Driven Interface Water Evaporation

Solar-driven water evaporation using a collaborative photothermal conversion material system based on carbonized waste polyphenylene sulfide and copper sulfide