Enzyme immobilization inside the porous wood structure: a natural scaffold for continuous-flow biocatalysis

Christian Goldhahn,Josef A. Taut,Mark Schubert,Ingo Burgert,Munish Chanana

DOI: https://doi.org/10.1039/c9ra10633b

IF: 4.036

2020-01-01

RSC Advances

Abstract:Green biocatalytic systems for continuous-flow cascade reactions are realized by enzyme immobilization inside the porous wood structure.

chemistry, multidisciplinary

What problem does this paper attempt to address?

An enzymatic continuous-flow reactor based on a pore-size matching nano- and isoporous block copolymer membrane

Zhenzhen Zhang,Liang Gao,Alexander Boes,Barbara Bajer,Johanna Stotz,Lina Apitius,Felix Jakob,Erik S Schneider,Evgeni Sperling,Martin Held,Thomas Emmler,Ulrich Schwaneberg,Volker Abetz

DOI: https://doi.org/10.1038/s41467-024-47007-y

2024-04-17

Abstract:Continuous-flow biocatalysis utilizing immobilized enzymes emerged as a sustainable route for chemical synthesis. However, inadequate biocatalytic efficiency from current flow reactors, caused by non-productive enzyme immobilization or enzyme-carrier mismatches in size, hampers its widespread application. Here, we demonstrate a general-applicable and robust approach for the fabrication of a high-performance enzymatic continuous-flow reactor via integrating well-designed scalable isoporous block copolymer (BCP) membranes as carriers with an oriented and productive immobilization employing material binding peptides (MBP). Densely packed uniform enzyme-matched nanochannels of well-designed BCP membranes endow the desired nanoconfined environments towards a productive immobilized phytase. Tuning nanochannel properties can further regulate the complex reaction process and fortify the catalytic performance. The synergistic design of enzyme-matched carriers and efficient enzyme immobilization empowers an excellent catalytic performance with >1 month operational stability, superior productivity, and a high space-time yield (1.05 × 105 g L-1 d-1) via a single-pass continuous-flow process. The obtained performance makes the designed nano- and isoporous block copolymer membrane reactor highly attractive for industrial applications.
Enzymes Immobilized in Wood-Derived Cellulose Scaffold for Constructing a Novel Modular Bioreactor

Zhihong Zhang,Mengchen Jin,Guiru Chen,Jiandu Lei,Luying Wang,Jun Ge

DOI: https://doi.org/10.1016/j.gce.2022.03.001

2023-01-01

Green Chemical Engineering

Abstract:Modular bioreactors can provide a flexible platform for constructing complex multi-step pathways,which may be a solution for maximizing reactions and overcoming the complexity of multi-enzyme systems.Here,we selected wood-derived cellulose scaffold as a support for enzyme immobilization and constructed the modular bioreactor.Cellulose scaffold was prepared after removing lignin from wood,followed by citric acid functionalization and the addition of glutaraldehyde finally allowed the cross-linking of enzymes.Three enzymes,horseradish peroxidase(HRP),glucose oxidase(GOD),and catalase(CAT),were separately immobilized,resulting in the immobilized enzyme amount to over 40 mg/g.The introduction of carboxyl groups from citric acid facilitated the rapid enzyme adsorption on the support surface and immobilized enzymes possess～65％expressed activity.Modular bio-reactors were constructed by using the immobilized enzymes.With the immobilized HRP module,reactor showed desired catalytic performance with the phenol degradation rate of＞90％.Also,a pH regulation can occur in the bioreactors for preserving enzyme activities and neutralizing acid products.In the GOD/CAT modular bioreactor,the cascade reaction with adjusting pH values can achieve a 95％yield of sodium gluconate and exhibit a favorable reusability of 5 operation cycles.
Biocatalysis Using Immobilized Enzymes in Continuous Flow for the Synthesis of Fine Chemicals

Matthew P. Thompson,Sebastian C. Cosgrove,Nicholas J. Turner,Itziar Peñafiel

DOI: https://doi.org/10.1021/acs.oprd.8b00305

2018-12-10

Abstract:Biocatalysis has emerged as one of the most promising technologies to enable green synthesis of important chemicals, due to the ambient conditions generally applied for these reactions. Nonetheless, a general uptake of enzymatic transformations has been hindered by the perceived high cost of recombinant proteins. Recent interest in continuous flow from the synthetic chemistry community has now begun to spread to biotransformations, with protein immobilization playing a key part. As a consequence, continuous biotransformations using immobilized enzymes are becoming more accessible to nonexperts. This review will discuss several recent examples of continuous biotransformations that use immobilization, with a focus on examples involving fine chemical synthesis. It will also examine some of the issues that the community has as a whole, most importantly a lack of unified reporting tools to allow comparison and assessment of the different techniques.

chemistry, organic, applied
Advantages of Hydrogel-Based 3D-Printed Enzyme Reactors and Their Limitations for Biocatalysis

Barbara Schmieg,Johannes Döbber,Frank Kirschhöfer,Martina Pohl,Matthias Franzreb

DOI: https://doi.org/10.3389/fbioe.2018.00211

IF: 5.7

2019-01-14

Frontiers in Bioengineering and Biotechnology

Abstract:The development of process steps catalyzed by immobilized enzymes usually encompasses the screening of enzyme variants, as well as the optimization of immobilization protocols and process parameters. Direct immobilization of biocatalysts by physical entrapment into hydrogels can be applied to reduce the effort required for immobilization, as the enzyme-specific optimization of the immobilization procedure is omitted. Physical entrapment is applicable for purified enzymes as well as crude cell extracts. Therefore, it can be used to quickly assess and compare activities of immobilized enzymes. For the application in flow reactors, we developed 3D-printed hydrogel lattices for enzyme entrapment as well as matching housings, also manufactured by 3D-printing. Testing the resulting enzyme reactors for three different enzymes, namely alcohol dehydrogenase from Lactobacillus brevis, benzoylformate decarboxylase from Pseudomonas putida and β-galactosidase from Aspergillus oryzae, and four different enzymatic reactions showed the broad applicability of the approach but also its limitations. The activity of the immobilized biocatalysts was measured in batch experiments and compared to the kinetics of the respective free enzymes in solution. This comparison yields an effectiveness factor, which is a key figure to describe the extent the immobilized catalyst is effectively utilized. For the examined systems the effectiveness factor ranged between 6 and 14% and decreased with increasing absolute activity of the entrapped enzymes due to mass transfer limitations. To test the suitability of the hydrogel lattices for continuous operation, they were inserted into 3D-printed reactor housings and operated at constant flow. Stable product formation could be monitored over a period of 72 h for all four enzymatic systems, including two reactions with redox cofactor regeneration. Comparing calculated and experimental conversion in the continuous setup, higher values of the effectiveness factor in batch experiments also hint at good performance in continuous flow. This can be used to optimize complex biocatalytic reactions on a small scale.

multidisciplinary sciences
Recent Trends in Enzyme Immobilization—Concepts for Expanding the Biocatalysis Toolbox

Hans-Jürgen Federsel,Thomas S. Moody,Steve J.C. Taylor

DOI: https://doi.org/10.3390/molecules26092822

IF: 4.6

2021-05-10

Molecules

Abstract:Enzymes have been exploited by humans for thousands of years in brewing and baking, but it is only recently that biocatalysis has become a mainstream technology for synthesis. Today, enzymes are used extensively in the manufacturing of pharmaceuticals, food, fine chemicals, flavors, fragrances and other products. Enzyme immobilization technology has also developed in parallel as a means of increasing enzyme performance and reducing process costs. The aim of this review is to present and discuss some of the more recent promising technical developments in enzyme immobilization, including the supports used, methods of fabrication, and their application in synthesis. The review highlights new support technologies such as the use of well-established polysaccharides in novel ways, the use of magnetic particles, DNA, renewable materials and hybrid organic–inorganic supports. The review also addresses how immobilization is being integrated into developing biocatalytic technology, for example in flow biocatalysis, the use of 3D printing and multi-enzymatic cascade reactions.

chemistry, multidisciplinary,biochemistry & molecular biology
Enzyme immobilization in hydrogels: A perfect liaison for efficient and sustainable biocatalysis

Johanna Meyer,Lars‐Erik Meyer,Selin Kara

DOI: https://doi.org/10.1002/elsc.202100087

2021-12-21

Engineering in Life Sciences

Abstract:Biocatalysis is an established chemical synthesis technology that has by no means been restricted to research laboratories. The use of enzymes for organic synthesis has evolved greatly from early development to proof-of-concept - from small batch production to industrial scale. Different enzyme immobilization strategies contributed to this success story. Recently, the use of hydrogel materials for the immobilization of enzymes has been attracting great interest. Within this review, we pay special attention to recent developments in this key emerging field of research. Firstly, we will briefly introduce the concepts of both biocatalysis and hydrogel worlds. Then, we list recent interesting publications that link both concepts. Finally, we provide an outlook and comment on future perspectives of further exploration of enzyme immobilization strategies in hydrogels.

biotechnology & applied microbiology
Organizing Multi-Enzyme Systems into Programmable Materials for Biocatalysis

Min-Ju Seo,Claudia Schmidt-Dannert

DOI: https://doi.org/10.3390/catal11040409

IF: 3.9

2021-03-24

Catalysts

Abstract:Significant advances in enzyme discovery, protein and reaction engineering have transformed biocatalysis into a viable technology for the industrial scale manufacturing of chemicals. Multi-enzyme catalysis has emerged as a new frontier for the synthesis of complex chemicals. However, the in vitro operation of multiple enzymes simultaneously in one vessel poses challenges that require new strategies for increasing the operational performance of enzymatic cascade reactions. Chief among those strategies is enzyme co-immobilization. This review will explore how advances in synthetic biology and protein engineering have led to bioinspired co-localization strategies for the scaffolding and compartmentalization of enzymes. Emphasis will be placed on genetically encoded co-localization mechanisms as platforms for future autonomously self-organizing biocatalytic systems. Such genetically programmable systems could be produced by cell factories or emerging cell-free systems. Challenges and opportunities towards self-assembling, multifunctional biocatalytic materials will be discussed.

chemistry, physical
Modeling Enzymatic Cascade Reactions Immobilized in Plug‐Flow Reactors for Flow Biocatalysis

Leandros Paschalidis,Sara Arana‐Peña,Volker Sieber,Jakob Burger

DOI: https://doi.org/10.1002/cite.202300159

2024-04-18

Chemie Ingenieur Technik

Abstract:A recently developed mechanistic modeling methodology for immobilized enzymatic cascades is extended to packed‐bed reactors. In packed‐bed reactors, the enzymes are immobilized in porous particles which are distributed in zones. The theoretical background of this design process is given by examining the most basic cases. Flow biocatalysis has emerged as a promising technology for the sustainable production of chemicals. Multiple immobilized enzymes are often used as biocatalysts to perform enzymatic cascade reactions in flow biocatalytic systems. When designing packed‐bed reactors with multiple immobilized enzymes, the enzymes are distributed in porous particles, and the porous particles are distributed in catalyst zones. A recently developed methodology is extended for selecting spatial immobilization distributions in batch reactors to packed‐bed reactors. Mechanistic models are used to compare the three most basic designs for a packed‐bed reactor, i.e., mixed individually immobilized enzymes, separated individually immobilized enzymes, and mixed co‐immobilized enzymes. For first‐order microkinetics, the design with co‐immobilized enzymes was found to always outperform the other two. Separating individually immobilized enzymes in two zones was proven to outperform mixing them in one zone for any positive order reaction kinetic.

engineering, chemical
Emerging Solutions for in Vivo Biocatalyst Immobilization: Tailor-Made Catalysts for Industrial Biocatalysis

Gizem Ölçücü,Oliver Klaus,Karl-Erich Jaeger,Thomas Drepper,Ulrich Krauss

DOI: https://doi.org/10.1021/acssuschemeng.1c02045

2021-06-28

Abstract:In industry, enzymes are often immobilized to generate more stable enzyme preparations that are easier to store, handle, and recycle for repetitive use. Traditionally, enzymes are bound to inorganic carrier materials, which requires case-to-case optimization and incurs additional labor and costs. Therefore, with the advent of rational protein design strategies as part of bottom-up synthetic biology approaches, numerous immobilization methods have been developed that enable the one-step production and immobilization of enzymes onto biogenic carrier materials often directly within the production host, which we here refer to as in vivo immobilization. As a result, nano- to micro-meter-sized functionalized biomaterials, or biologically produced enzyme immobilizates, are obtained that can directly be used for synthetic purposes. In this Perspective, we provide an overview over established and recently emerging in vivo enzyme immobilization methods, with special emphasis on their applicability for (industrial) biocatalysis. For each approach, we present fundamental working principles as well as advantages and limitations guiding future research avenues toward sustainable applications in the bioindustry.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acssuschemeng.1c02045?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acssuschemeng.1c02045</a>.A table of abbreviations used in the manuscript (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.1c02045/suppl_file/sc1c02045_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

chemistry, multidisciplinary,engineering, chemical,green & sustainable science & technology
Enzyme Immobilization and Co-Immobilization: Main Framework, Advances and Some Applications

Joaquim Bié,Bruno Sepodes,Pedro C. B. Fernandes,Maria H. L. Ribeiro

DOI: https://doi.org/10.3390/pr10030494

IF: 3.5

2022-03-01

Processes

Abstract:Enzymes are outstanding (bio)catalysts, not solely on account of their ability to increase reaction rates by up to several orders of magnitude but also for the high degree of substrate specificity, regiospecificity and stereospecificity. The use and development of enzymes as robust biocatalysts is one of the main challenges in biotechnology. However, despite the high specificities and turnover of enzymes, there are also drawbacks. At the industrial level, these drawbacks are typically overcome by resorting to immobilized enzymes to enhance stability. Immobilization of biocatalysts allows their reuse, increases stability, facilitates process control, eases product recovery, and enhances product yield and quality. This is especially important for expensive enzymes, for those obtained in low fermentation yield and with relatively low activity. This review provides an integrated perspective on (multi)enzyme immobilization that abridges a critical evaluation of immobilization methods and carriers, biocatalyst metrics, impact of key carrier features on biocatalyst performance, trends towards miniaturization and detailed illustrative examples that are representative of biocatalytic applications promoting sustainability.

engineering, chemical
Tuning Multistep Biocatalysis through Enzyme and Cofactor Colocalization in Charged Porous Protein Macromolecular Frameworks

Yang Wang,Trevor Douglas

DOI: https://doi.org/10.1021/acsami.3c10340

IF: 9.5

2023-09-13

ACS Applied Materials & Interfaces

Abstract:Spatial organization of biocatalytic activities is crucial to organisms to efficiently process complex metabolism. Inspired by this mechanism, artificial scaffold structures are designed to harbor functionally coupled biocatalysts, resulting in acellular materials that can complete multistep reactions at high efficiency and low cost. Substrate channeling is an approach for efficiency enhancement of multistep reactions, but fast diffusion of small molecule intermediates poses a major challenge to...

materials science, multidisciplinary,nanoscience & nanotechnology
Enzyme immobilization strategies for the design of robust and efficient biocatalysts

Jose M. Guisan,Gloria Fernandez-Lorente,Javier Rocha-Martin,Daniel Moreno-Gamero

DOI: https://doi.org/10.1016/j.cogsc.2022.100593

IF: 9.3

2022-06-01

Current Opinion in Green and Sustainable Chemistry

Abstract:Different strategies for the preparation of efficient and robust immobilized biocatalysts are here reviewed. Different physico-chemical approaches are discussed. i.- The stabilization of enzyme by any kind of immobilization on pre-existing porous supports. ii.- The stabilization of enzymes by multipoint covalent attachment on support surfaces. iii.- Additional stabilization of immobilized-stabilized enzyme by physical or chemical modification with polymers. These three strategies can be easily developed when enzymes are immobilized in pre-existing porous supports. In addition to that, these immobilized-stabilized derivatives are optimal to develop enzyme reaction engineering and reactor engineering. Stabilizations ranging between 1000 and 100,000 folds regarding diluted soluble enzymes are here reported.

chemistry, multidisciplinary,green & sustainable science & technology
Enzyme entrapment, biocatalyst immobilization without covalent attachment

Hasan T. Imam,Patricia C. Marr,Andrew C. Marr

DOI: https://doi.org/10.1039/d1gc01852c

IF: 9.8

2021-01-01

Green Chemistry

Abstract:The entrapment of enzymes in organic, inorganic or biomaterials can yield active immobilized biocatalysts for chemical transformations without the need to form covalent bonds with the protein.

chemistry, multidisciplinary,green & sustainable science & technology
Designing multifunctional biocatalytic cascade system by multi-enzyme co-immobilization on biopolymers and nanostructured materials — A review

Zhongbiao Tan,Hairong Cheng,Gang Chen,Fang Ju,Jakub Zdarta,Teofil Jesionowski,Muhammad Bilal,Jesús Fernandez-Lucas

DOI: https://doi.org/10.1016/j.ijbiomac.2022.12.074

IF: 8.2

2022-12-13

International Journal of Biological Macromolecules

Abstract:In recent decades, enzyme-based biocatalytic systems have garnered increasing interest in industrial and applied research for catalysis and organic chemistry. Many enzymatic reactions have been applied to sustainable and environmentally friendly production processes, particularly in the pharmaceutical, fine chemicals, and flavor/fragrance industries. However, only a fraction of the enzymes available has been stepped up towards industrial-scale manufacturing due to low enzyme stability and challenging separation, recovery, and reusability. In this context, immobilization and co-immobilization in robust support materials have emerged as valuable strategies to overcome these inadequacies by facilitating repeated or continuous batch operations and downstream processes. To further reduce separations, it can be advantageous to use multiple enzymes at once in one pot. Enzyme co-immobilization enables biocatalytic synergism and reusability, boosting process efficiency and cost-effectiveness. Several studies on multi-enzyme immobilization and co-localization propose kinetic advantages of the enhanced turnover number for multiple enzymes. This review spotlights recent progress in developing versatile biocatalytic cascade systems by multi-enzyme co-immobilization on environmentally friendly biopolymers and nanostructured materials and their application scope in the chemical and biotechnological industries. After a succinct overview of carrier-based and carrier-free immobilization/co-immobilizations, co-immobilization of enzymes on a range of biopolymer and nanomaterials-based supports is thoroughly compiled with contemporary and state-of-the-art examples. This study provides a new horizon in developing effective and innovative multi-enzymatic systems with new possibilities to fully harness the adventure of biocatalytic systems.

polymer science,biochemistry & molecular biology,chemistry, applied
Enzyme Immobilization on a Delignified Bamboo Scaffold as a Green Hierarchical Bioreactor

Yihua Ren,Libo Zhang,Tao Sun,Yingwu Yin,Qian Wang

DOI: https://doi.org/10.1021/acssuschemeng.2c00346

IF: 8.4

2022-05-03

ACS Sustainable Chemistry & Engineering

Abstract:Enzymes immobilized on cellulose-based supports provide important applications because they are convenient, economical, and stable. In this paper, we report the application of delignified bamboo as a novel cellulose-based scaffold for enzyme immobilization and bamboo enzyme-based flow bioreactors, which can drastically improve the catalytic reaction and subsequent separation. The delignified bamboo provides a superior biobenign and hierarchically structured platform that can be conveniently derivatized to conjugate functional proteins with high loading capacity. With an optimized delignification process and a modified Schiff base-dependent conjugation method, we identified an efficient approach to immobilize enzymes on bamboo. In our system, generally ∼8 mg/m2·g–1 proteins can be immobilized on the delignified bamboo, which is significantly higher than that of the reported methods. The immobilized enzymes on bamboo showed sustained activity under ambient conditions, excellent reusability with 13 cycles, and high stability of more than 7 weeks of storage at 4 °C, which can be readily adapted in flow reactors for both single transformation and tandem catalysis. As an example, drugs of abuse in synthetic urine samples were analyzed in β-glucuronidase (BGU)-functionalized flow reactors in 0.1 M phosphate buffer, pH 7.4, at room temperature, the condition suitable for the bioanalysis. Our work demonstrates that the delignified bamboo can serve as a readily available support for enzyme immobilization and hierarchical bioreactor construction, which will potentially increase the robustness of enzymes in analytical and synthetical applications.

chemistry, multidisciplinary,engineering, chemical,green & sustainable science & technology
In Situ Enzyme Immobilization by Covalent Organic Frameworks

Clémence Sicard

DOI: https://doi.org/10.1002/anie.202213405

2023-01-02

Abstract:Enzyme immobilization is a widely reported method to favor the applicability of enzymes by enhancing their stability and re-usability. Among the various existing solid supports and immobilization strategies, the in situ encapsulation of enzymes within crystalline porous matrices is a powerful tool to design biohybrids with a stable and protected catalytic activity. However, to date, only a few metal-organic frameworks (MOFs) and hydrogen-bonded organic frameworks (HOFs) have been reported. Excitingly, for the first time, Y. Chen and co-workers expanded the in situ bio-encapsulation to a new class of crystalline porous materials, namely covalent organic frameworks (COFs). The enzyme@COF materials not only exhibited high enzyme loading with minimal leaching, high catalytic activity and selectivity, chemical and long-term stability and recyclability but could also be scaled up to a few grams. Undoubtedly, this work opens new striking opportunities for enzymatic immobilization and will stimulate new research on COF-based matrices.
Pore Environment Control and Enhanced Performance of Enzymes Infiltrated in Covalent Organic Frameworks

Qi Sun,Chung-Wei Fu,Briana Aguila,Jason Perman,Sai Wang,Hsi-Ya Huang,Feng-Shou Xiao,Shengqian Ma

DOI: https://doi.org/10.1021/jacs.7b10642

IF: 15

2018-01-11

Journal of the American Chemical Society

Abstract:In the drive toward green and sustainable methodologies for chemicals manufacturing, biocatalysts are predicted to have much to offer in the years to come. That being said, their practical applications are often hampered by a lack of long-term operational stability, limited operating range, and a low recyclability for the enzymes utilized. Herein, we show how covalent organic frameworks (COFs) possess all the necessary requirements needed to serve as ideal host materials for enzymes. The resultant biocomposites of this study have shown the ability boost the stability and robustness of the enzyme in question, namely lipase PS, while also displaying activities far outperforming the free enzyme and biocomposites made from other types of porous materials, such as mesoporous silica and metal-organic frameworks, exemplified in the kinetic resolution of the alcohol assays performed. The ability to easily tune the pore environment of a COF using monomers bearing specific functional groups can improve its compatibility with a given enzyme. As a result, the orientation of the enzyme active site can be modulated through designed interactions between both components, thus improving the enzymatic activity of the biocomposites. Moreover, in comparison with their amorphous analogues, the well-defined COF pore channels not only make the accommodated enzymes more accessible to the reagents but also serve as stronger shields to safeguard the enzymes from deactivation, as evidenced by superior activities and tolerance to harsh environments. The amenability of COFs, along with our increasing understanding of the design rules for stabilizing enzymes in an accessible fashion, gives great promise for providing "off the shelf" biocatalysts for synthetic transformations.

chemistry, multidisciplinary
Immobilized Enzymes: Methods and Applications

Wilhelm Tischer,Frank Wedekind

DOI: https://doi.org/10.1007/3-540-68116-7_4

1999-01-01

Topics in Current Chemistry

Abstract:Immobilized enzymes are used in organic syntheses to fully exploit the technical and economical advantages of biocatalysts based on isolated enzymes. Immobilization enables the separation of the enzyme catalyst easily from the reaction mixture, and can lower the costs of enzymes dramatically. This is true for immobilized enzyme preparations that provide a well-balanced overall performance, based on reasonable immobilization yields, low mass transfer limitations, and high operational stability. There are many methods available for immobilization which span from binding on prefabricated carrier materials to incorporation into in situ prepared carriers. Operative binding forces vary between weak multiple adsorptive interactions and single attachments through strong covalent binding.Which of the methods is the most appropriate is usually a matter of the desired applications. It is therefore the intention of this paper to outline the common immobilization methods and reaction technologies to facilitate proper applications of immobilized enzymes.

chemistry, multidisciplinary

Enzyme immobilization inside the porous wood structure: a natural scaffold for continuous-flow biocatalysis

An enzymatic continuous-flow reactor based on a pore-size matching nano- and isoporous block copolymer membrane

Enzymes Immobilized in Wood-Derived Cellulose Scaffold for Constructing a Novel Modular Bioreactor

Biocatalysis Using Immobilized Enzymes in Continuous Flow for the Synthesis of Fine Chemicals

Advantages of Hydrogel-Based 3D-Printed Enzyme Reactors and Their Limitations for Biocatalysis

Recent Trends in Enzyme Immobilization—Concepts for Expanding the Biocatalysis Toolbox

Enzyme immobilization in hydrogels: A perfect liaison for efficient and sustainable biocatalysis

Organizing Multi-Enzyme Systems into Programmable Materials for Biocatalysis

Modeling Enzymatic Cascade Reactions Immobilized in Plug‐Flow Reactors for Flow Biocatalysis

Emerging Solutions for in Vivo Biocatalyst Immobilization: Tailor-Made Catalysts for Industrial Biocatalysis

Enzyme Immobilization and Co-Immobilization: Main Framework, Advances and Some Applications

Tuning Multistep Biocatalysis through Enzyme and Cofactor Colocalization in Charged Porous Protein Macromolecular Frameworks

Enzyme immobilization strategies for the design of robust and efficient biocatalysts

Enzyme entrapment, biocatalyst immobilization without covalent attachment

Designing multifunctional biocatalytic cascade system by multi-enzyme co-immobilization on biopolymers and nanostructured materials — A review

Enzyme Immobilization on a Delignified Bamboo Scaffold as a Green Hierarchical Bioreactor

In Situ Enzyme Immobilization by Covalent Organic Frameworks

Pore Environment Control and Enhanced Performance of Enzymes Infiltrated in Covalent Organic Frameworks

Immobilized Enzymes: Methods and Applications