Abstract:Nanocellulose-based foams are widely used as absorbents due to their highly porous networks and large surface areas. However, their inherent hydrophilicity and poor wet resilience limit their applications in water remediation for the removal of hydrophobic components (e.g., oil and organic solvent spills). A straightforward process combining biomass-derived materials, cellulose nanofibrils (CNFs), and natural rubber (NR) latex, in the absence of any organic solvent, is herein elucidated to design eco-friendly hydrophobic foams. NR acts as an anchoring filler within the CNF three-dimensional (3D) network, tailoring the production of CNF foams with tunable morphologies, interconnected walls, specific surface areas (∼226 m2·g–1), and higher porosities (more than 92%). Aqueous NR and CNF dispersion exhibited great colloidal stability (ζ-potential above −30 mV), a desirable characteristic to obtain controlled structures. The spherical shape of NR (diameter of ca. 500 nm) and the fibrous morphology of CNF, both by themselves and when mixed, were evidenced by cryogenic transmission electron microscopy. The porous architecture built up through ice templating was corroborated by scanning electron microscopy and 3D X-ray microtomography (μCT). The CNF 3D network and NR promoted rigid and robust foams with elevated compressive modulus (∼600 kPa, for NR20/CNF80). In situ four-dimensional (4D) μCT revealed an impressive increase in oil uptake—from 44 ± 5 to 90 ± 7%—by foam pores upon NR addition. NR was demonstrated by pore segmentation to be evenly distributed throughout the CNF surface, awarding great hydrophobicity (apparent contact angle of around 100°), excellent and quick oil/organic solvent absorption (above 50 g·g–1 in 3 s), and excellent reusability (20 cycles) for organic solvents and oils. This green material exhibits great capacity of soaking nonpolar molecules, standing out as an environmentally friendly, cost-effective, and promising alternative for water cleanup.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsanm.0c02203?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsanm.0c02203</a>.SEM images, supplementary morphometric analysis, mechanical attributes for pristine CNF foams, absorption capacity data, structural resistance in organic solvents, complementary data reusability tests, reusability tests of NR20/CNF80 in the diesel oil/water mixture, statistical data of water contact angles, specific surface areas obtained by the methylene blue adsorption test, complementary scheme of the ice-templating process and coating/cross-linking of NR/CNF foams, adhesion assays by force–distance curves, complementary spectroscopy analysis, and cellulose composition (<a class="ext-link" href="/doi/suppl/10.1021/acsanm.0c02203/suppl_file/an0c02203_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Sustainable Reuse of Char Waste for Oil Spill Recovery Foams

Sorption Capacity of Polydimethylsiloxane Foams Filled with Thermal-Treated Bentonite—Polydimethylsiloxane Composite Foams for Oil Spill Remediation

Easy Synthesis of Light-weight Hierarchical Mesoporous Carbon Sponges for Efficient Oil Spill Recovery

Facilitate the preparation of naturally modified and self-healing superhydrophobic/superoleophilic biochar-based foams for efficient oil-water separation

Robust 3D porous superhydrophobic foam with excellent photothermal effect and Joule heating effect for efficient all-weather cleanup of highly viscous crude oil spills

Development of sludge-based activated char sorbent with enhanced hydrophobicity for oil spill cleanup

Modified silica nanoparticles stabilized foam for enhanced oil recovery

Polyurethane Foam and Algae-Based Activated Carbon Biocomposites for Oil Spill Remediation

Durable superhydrophobic/superoleophilic melamine foam based on biomass-derived porous carbon and multi-walled carbon nanotube for oil/water separation

Durable Superhydrophobic/Superoleophilic Graphene-based Foam for High-efficiency Oil Spill Cleanups and Recovery.

Nano-stabilized foam for enhanced oil recovery using green nanocomposites and anionic surfactants: An experimental study

Multifunctional hydrophobic bio-based foam toward highly efficient photothermal cleanup of high-viscosity crude oil spills, oil-water separation and aqueous organic pollutant elimination

Facile preparation of melamine foam with superhydrophobic performance and its system integration with prototype equipment for the clean-up of oil spills on water surface

Superhydrophobic foam combined with biomass-derived TENG based on upcycled coconut husk for efficient oil–water separation

A Silica–Lignin Hybrid Filler in a Natural Rubber Foam Composite as a Green Oil Spill Absorbent

Room-temperature synthesis of fluorinated covalent organic framework decorated superhydrophobic sponges for highly efficient crude oil spill cleanup

Lightweight, Hydrophobic and Recyclable Carbon Foam Derived from Lignin–resorcinol–glyoxal Resin for Oil and Solvent Spill Capture

Fabrication of Foam-Like Oil Sorbent from Polylactic Acid and Calotropis Gigantea Fiber for Effective Oil Absorption

Novel Magnetically Driven Superhydrophobic Sponges Coated with Asphaltene/Kaolin Nanoparticles for Effective Oil Spill Cleanup

Development of a spiropyran-assisted cellulose aerogel with switchable wettability as oil sorbent for oil spill cleanup

Porous Cellulose Nanofibril–Natural Rubber Latex Composite Foams for Oil and Organic Solvent Absorption