Abstract:Cemented tailings backfill has gained widespread acceptance in mining industries due to its stable performance and environmental advantages. However, Ordinary Portland cement (OPC), based on engineering experience, falls short in meeting the requirements of cost-effectiveness and environmental protection criteria for cemented fine tailings (median size d50 <20 mu m) backfill. Nickel slag (NS), an industrial solid waste with potential reactivity derived from nickel manufacturing processes, is currently employed as a concrete additive at a low rate. In this work, a modification was conducted by melting-quenching the NS- Al(2)O(3)mixtures, followed by a physicochemical analysis of the resulting granulated samples (GAN) using BET and X-ray fluorescence. The mineralogy and structural properties were examined for the GAN samples using X-ray diffraction and Fourier transform infrared spectroscopy. Each of the T-CGAN pastes was formulated by replacing 40 wt% of OPC with the GAN, and then blended with fine tailings at 1:4. The flowability and compressive strength were measured for the T-CGAN pastes, while the hydration products and microstructures of the paste samples were analyzed by derivative thermogravimetry and scanning electron microscope, respectively. The results indicate that the addition of Al2O3 not only provides abundant network formers to GAN glass, but also facilitates the conversion of [SiO4] tetrahedrons from Q4 with strong bond energy to Q(3) and Q(2 )with lower ones, thereby significantly enhancing the pozzolanic activity of the original NS. The T-CGAN slurries exhibit slight decreases in slump values from 228.8 to 224.9 mm compared to T-OPC slurry (236.5 mm), attributed mainly to the strong water absorption of GAN. TCGAN pastes with higher Al2O3 addition acquired greater compressive strengths during the whole curing ages. After 90 days of curing, T-CGAN20 paste achieves the maximum compressive strength (5.14 MPa), higher than that of the T-OPC by 1.03 MPa. The T-CGAN pastes richer in Al2O3 release more reactive Si and Al to participate in the pozzolanic reaction with calcium hydroxide, contributing to additional formations of C-S-H gel and C-A-H, with SEM micrographs showing a compact microstructure with elevated ratios of Ca/Si, Al/Si, and Fe/Si. This study suggests an effective and environmental way to enhance the pozzolanic activity of the original NS by incorporating Al2O3. The modified NS can then be utilized as a high-performance cement substitute for cemented fine tailings backfill, which also significantly enhances the sustainability for both mining and building industries.

Effect of Desliming of Tailings on the Fresh and Hardened Properties of Paste Backfill Made from Alkali-Activated Slag

Pore and Strength Characteristics of Cemented Paste Backfill Using Sulphide Tailings: Effect of Sulphur Content

Strength and leaching behavior of tailing-based paste backfill at high water content amended with lime activated ground granulated blast furnace slag and flocculant

Dual waste utilization in cemented paste backfill using steel slag and mine tailings and the heavy metals immobilization effects

A Novel Alkali-Slag Cemented Tailings Backfill: Recycling of Soda Residue and Calcium Carbide Slag

Effect of Alkali-Activated Slag and Phosphogypsum Binder on the Strength and Workability of Cemented Paste Backfill and Its Environmental Impact

Recycling Dam Tailings as Cemented Mine Backfill: Mechanical and Geotechnical Properties

Admixture Effects on the Rheological/Mechanical Behavior and Micro-Structure Evolution of Alkali-Activated Slag Backfills

Synthesis and Characterization of Cemented Paste Backfill: Reuse of Multiple Solid Wastes

The Rheological, Mechanical and Heavy Metal Leaching Properties of Cemented Paste Backfill under the Influence of Anionic Polyacrylamide.

In-situ Stabilization/solidification of Lead/zinc Mine Tailings by Cemented Paste Backfill Modified with Low-Carbon Bentonite Alternative

Effect of Overflow Tailings Properties on Cemented Paste Backfill

Utilization of Modified Copper Slag Activated by Na2SO4 and CaO for Unclassified Lead/zinc Mine Tailings Based Cemented Paste Backfill

Effect of Enhanced Pozzolanic Activity in Nickel Slag Modified with Al2O3 on Mechanical Properties of Cemented Fine Tailings Backfill

Solidification/stabilization of zinc-lead tailings by alkali activated slag cement

Towards Understanding the Rheological Properties of Slag-Cemented Paste Backfill

Study on the Rheological and Thixotropic Properties of Fiber-Reinforced Cemented Paste Backfill Containing Blast Furnace Slag

Compressive Behavior and Microstructural Properties of Tailings Polypropylene Fibre-Reinforced Cemented Paste Backfill

Effect of Activated Siliceous Wastes Incorporated as Mineral Admixtures on the Rheological Properties of Cement Paste: Insights into Their Physicochemical Interactions in Suspension

Experimental Investigation of Recycling Cement Kiln Dust (CKD) as a Co-Binder Material in Cemented Paste Backfill (CPB) Made with Copper Tailings

Production of a new type of cemented paste backfill with solid waste from carbide slag, soda residue, and red mud: mechanism, optimization, and its environmental effects