Abstract:The swift industrialization and urbanisation have led to the discharge of significant amounts of hazardous heavy metals into water environments. Heavy metal pollution is currently one of the most significant environmental challenges being addressed, attracting researchers due to its biotoxicity, and non-biodegradability even at minimal concentrations [1]. Chromium (Cr) is among the most prevalent heavy metal contaminants. Its oxidation state, Cr(VI), harms the environment yet has catastrophic consequences for human health [2]. It is removed by physical and chemical procedures such as ion exchange, chemical precipitation and electrochemical treatment. Yet, most of these procedures have downsides, such as the formation of hazardous sludge, causing disposal issues and the need for costly tools and monitoring systems [3]. Adsorption is regarded an appealing and favourable technology because to its ease of design, simplicity, and high efficiency. Carbon-based nanomaterials have been investigated as superior adsorbents in aqueous solutions for the separation of organic and inorganic contaminants. The current study recommends the usage of adsorbents based on graphene oxide (GO). GO is an oxygen-rich material that is produced during the oxidation of graphite. It features hydrophobic areas due to aromatic groups in the nanosheets' centres, along with a large number of hydrophilic functional groups such as hydroxy, aldehyde, epoxy, and carboxyl groups [4]. The latter allow GO to swell and perform electrostatic functions. Chitosan (Cs) is a great adsorbent since it is inexpensive, is biocompatible, and causes no secondary pollution. Its molecular chains include -NH2 and -OH groups, which can interact with heavy metal ions and give significant adsorption capacity [5]. Silicon dioxide (SiO2) nanoparticles with graphene oxide have better physical and chemical characteristics than graphene oxide-like surface area. Similar research has revealed that the presence of SiO2 increases the adsorbent's adsorption capacity for Cr(VI) [6]. The effect of the pH value, contact time and initial chromium concentration was examined in order to determine the feasibility of Cs/GO@SiO2. Its structure and the morphology were studied in detail by the application of BET, XRD, FTIR and SEM techniques. According to the results, the modification of Cs with GO@SiO2 enhanced the percentage removal of chromium ions, especially, in acidic conditions by using 0.5 g/L of the adsorbent. Experimental data of equilibrium were used to calculate adsorption isotherms. According to thermodynamics the spontaneous nature of their adsorption was confirmed. Overall, the results indicate that Cs/GO@SiO2 can be effectively employed for removal of chromium from aqueous solutions.

A Comparative Study on Cu2+, Zn2+, Ni2+, Fe3+, and Cr3+ Metal Ions Removal from Industrial Wastewaters by Chitosan-Based Composite Cryogels

Aminopolycarboxylic Acids-Functionalized Chitosan-Based Composite Cryogels as Valuable Heavy Metal Ions Sorbents: Fixed-Bed Column Studies and Theoretical Analysis

Retention of Ciprofloxacin and Carbamazepine from Aqueous Solutions Using Chitosan-Based Cryostructured Composites

Concentration of heavy metal ions from aqueous media under dynamic conditions using a composite sorbent based on chitosan and silica

Insight into a novel composite biosorbent by incorporating chitosan into electrolytic manganese residue for Cr(VI) removal from aqueous solutions

Chitosan Modified Diatomite Cross-Linked with Sodium Alginate and Polyethyleneimine Composite Gel Particles for Efficient Removal of Copper and Lead Ions

Novel Nanocomposites and Biopolymer-Based Nanocomposites for Hexavalent Chromium Removal from Aqueous Media

Chitosan-based foam composites for hexavalent chromium remediation: Effect of microcellulose and crosslinking agent content

Contribution of Cross-Linker and Silica Morphology on Cr(VI) Sorption Performances of Organic Anion Exchangers Embedded into Silica Pores

Polysaccharide-Based Composite Hydrogels as Sustainable Materials for Removal of Pollutants from Wastewater

The efficiency of removing heavy metal ions from industrial electropolishing wastewater using natural materials

Efficient removal of chromate from wastewater using a one-pot synthesis of chitosan cross-linked ceria incorporated hydrous copper oxide bio-polymeric composite

Chitosan-Based Beads Incorporating Inorganic–Organic Composites for Copper Ion Retention in Aqueous Solutions

Rational Design of Polyamine-Based Cryogels for Metal Ion Sorption

Selective Heavy Metal Removal and Water Purification by Microfluidically-Generated Chitosan Microspheres: Characteristics, Modeling and Application.

Removal of Heavy Metal Ions from Wastewaters by Using Chitosan/Poly(Vinyl Alcohol) Adsorbents: A Review

Chitosan-minerals-based composites for adsorption of caesium, cobalt and europium

Chitosan/Graphene oxide/SiO2 Nanoadsorbents for the Removal of Cr(VI) from Wastewaters

Adsorption efficiency of chitosan/clinoptilolite (CS/CZ) composite for effective removal of Cd+2 and Cr+6 ions from wastewater effluents of dairy cattle farms

Chitosan-based Composite Film Adsorbents Reinforced with Nanocellulose for Removal of Cu(II) Ion from Wastewater: Preparation, Characterization, and Adsorption Mechanism

REMOVAL OF Cu(II), Cd(II), Co(II), Zn(II), Cr(VI) FROM WASTEWATER BY STABILIZED NANOSCALE ZERO-VALENT IRON