A carbon nanotube approach for efficient thermally insulating material with high mechanical stability and fire-retardancy

Hang Zhan,Qiang Qiang Shi,Guang Wu,Jian Nong Wang

DOI: https://doi.org/10.1039/d0ra03472j

IF: 4.036

2020-01-01

RSC Advances

Abstract:Highly mechanically stable and fire-retardant thermally insulating materials (TIMs) are prepared from a cylindrical carbon nanotube (CNT) assembly.

chemistry, multidisciplinary

What problem does this paper attempt to address?

Carbon Nanotube-Based Super Nanotubes: Tunable Thermal Conductivity in Three Dimensions

Haifei Zhan,John M. Bell,Yuantong Gu

DOI: https://doi.org/10.1039/c5ra05584a

IF: 4.036

2015-01-01

RSC Advances

Abstract:Advances in nanomaterials/nanostructures offer the possibility of fabricating multifunctional materials for use in engineering applications. Carbon nanotube (CNT)-based nanostructures are a representative building block for these multifunctional materials. Based on a series of in silico studies, we investigated the possibility of tuning the thermal conductivity of a three-dimensional CNT-based nanostructure: a single-walled CNT-based super-nanotube. The thermal conductivity of the super-nanotubes was shown to vary with different connecting carbon rings and super-nanotubes with longer constituent single-walled CNTs and larger diameters had a smaller thermal conductivity. The inverse of the thermal conductivity of the super-nanotubes showed a good linear relationship with the inverse of the length. The thermal conductivity was approximately proportional to the inverse of the temperature, but was insensitive to the axial strain as a result of the Poisson ratio. These results provide a fundamental understanding of the thermal conductivity of the super-nanotubes and will guide their future design/fabrication and engineering applications.
Low Interfacial Thermal Resistance Between Crossed Ultra-Thin Carbon Nanothreads

Haifei Zhan,Gang Zhang,Xiaoying Zhuang,Rabczuk Timon,Yuantong Gu

DOI: https://doi.org/10.1016/j.carbon.2020.04.065

IF: 10.9

2020-01-01

Carbon

Abstract:To ensure reliable performance and lifetime of electronics, effective and efficient heat removal is essential, which relies heavily on the high thermal conductivity of the packaging substrates and thermal interface materials (TIMs). Highly conductive fillers have been commonly applied to enhance the thermal conductivity of TIMs, while the enhancement effect has been significantly impeded by the interfacial thermal resistance. This work reveals that the new type of ultra-thin carbon nanomaterial – carbon nanothreads, possess a much smaller interfacial thermal resistance (3.1 ± 0.4 × 10−9 Km2/W) between each other compared with that of the (4,0) carbon nanotubes (8.8 ± 4.6 × 10−9 Km2/W). Similar as found for carbon nanotubes, the interfacial thermal resistance decreases when the interfacial crossing angle decreases or the contact area increases. Surprisingly, both compressive and stretching interfacial distance are found to enhance the interfacial thermal conductance. It is found that different carbon nanothreads exhibit an interfacial thermal conductance between 60 and 110 pW/K, which can be remarkably enhanced by introducing interfacial cross-linkers. Combining with the ultra-thin nature of carbon nanothreads, our work suggests that carbon nanothreads can be an excellent alternative nanofillers for polymer composites with enhanced thermal conductivity.
Carbon-nanotube-templated Carbon Nanofibers with Improved Mechanical Performance

Wei Zhao,Yongqiang Zhang,Xiaoguang Wang,Huanhuan Lu,Guozhu Liu,Jinghe Wei,Zhiwei Shan,Peng Liu,Kaili Jiang,Shoushan Fan

DOI: https://doi.org/10.1063/5.0031159

IF: 2.877

2021-01-01

Journal of Applied Physics

Abstract:The carbon nanotube (CNT) is a compelling and promising material for industrial applications requiring high strength and rigidity. For a multi-walled CNT (MWCNT), the nominal tensile strength and Young's modulus (considering the whole cross-sectional area of the specimen) are key mechanical factors for the practical application of macroscopic fibers and composites. However, the nominal tensile strength and Young's modulus of MWCNTs are much lower than their effective tensile strength and Young's modulus (considering the fracture cross-sectional area) because the outermost graphite layer always fractures first due to the low cross-link between graphite layers. In this paper, we fabricated the carbon nanofibers (CNFs) by epitaxial growth on super-aligned MWCNT film template and conducted in situ uniaxial tensile tests on individual carbon-nanotube-templated CNFs. The individual CNFs show improved nominal mechanical performance than previously reported MWCNTs. The nominal mechanical properties enhancement of the CNFs is attributed to the effective control on load transfer between interwalls.
Nano-engineering Thermal Transport Performance of Carbon Nanotube Networks with Polymer Intercalation: a Molecular Dynamics Study.

Jianwei Zhang,Cai Jiang,Dazhi Jiang,Hua-Xin Peng

DOI: https://doi.org/10.1039/c3cp53714e

IF: 3.3

2013-01-01

Physical Chemistry Chemical Physics

Abstract:Based on polymer perfusion behaviour inside carbon nanotube (CNT) networks, the thermal transport performances of the CNT networks with various extents of polymer intercalation are studied by dividing them into two parts: thermal transport at the tube contact interfaces of CNT junctions and along the tube axis. The thermal transport performance at the tube contact interfaces of CNT junctions is similar to that in the transverse direction of graphene layers. Hence, to obtain a fundamental understanding of thermal transport performance at the tube contact interfaces, thermal conductance along the z-axis direction of graphene layers with and without polymer intercalation is investigated using a non-equilibrium molecular dynamics (MD) simulation method. Thermal conductivity along the tube axis direction of the polymer wrapped CNT is also calculated using the same method. The simulation results show that a low extent of polymer aggregation at the tube contact interfaces can significantly improve the interfacial thermal conductance. However, when the polymer content at the tube contact interfaces exceeds a critical fraction, the interfacial thermal conductance is decreased. The results also indicate that the polymer molecules wrapping around the CNT walls have a strong negative influence on the bulk thermal conductivity of the CNT along its axis direction.
Thermal Conductivity of A New Carbon Nanotube Analog: the Diamond Nanothread

Haifei Zhan,Gang Zhang,Yingyan Zhang,V. B. C. Tan,John M. Bell,Yuantong Gu

DOI: https://doi.org/10.1016/j.carbon.2015.11.012

2016-01-01

Abstract:Based on the non-equilibrium molecular dynamics simulations, we have studied the thermal conductivities of a novel ultra-thin one-dimensional carbon nanomaterial - diamond nanothread (DNT). Unlike single-wall carbon nanotube (CNT), the existence of the Stone-Wales transformations in DNT endows it with richer thermal transport characteristics. There is a transition from wave-dominated to particle-dominated transport region, which depends on the length of poly-benzene rings. However, independent of the transport region, strong length dependence in thermal conductivity is observed in DNTs with different lengths of poly-benzene ring. The distinctive SW characteristic in DNT provides more degrees of freedom to tune the thermal conductivity not found in the homogeneous structure of CNT. Therefore, DNT is an ideal platform to investigate various thermal transport mechanisms at the nanoscale. Its high tunability raises the potential to design DNTs for different applications, such as thermal connection and temperature management.
Carbon Nanostructure Enabled High Performance Thermal Insulating Material

Kaili Jiang,Zi Yuan,Guo Chen,Duanliang Zhou,Peng Liu,Liang Liu,Shoushan Fan

DOI: https://doi.org/10.21203/rs.3.rs-4324204/v1

2024-01-01

Abstract:Abstract The high-temperature thermal insulation materials (TIM) are critical for aerospace technology. The more thermal insulation it is, the thinner TIM is needed. Here we show that, by stacking super-aligned carbon nanotube (SACNT) films together, SACNT-stacked films (SACNT-SF) can be obtained, which outperforms the traditional TIMs for a wide range of working temperatures. In vacuum, the effective thermal conductivity of SACNT-SF is only 0.004W/m·K at room temperature, and 0.03 W/m·K at 2600℃. Theoretical analysis indicates that the nanometer diameter of the carbon nanotube, the nanoporous and anisotropic structure and the ultra-low density of SACNT-SF, and the high extinction coefficient of sp2-carbon play critical roles in reducing heat conduction via solid skeletons, radiation, and gas medium. The SACNT-SF is nanometer thick and fully flexible, which can be continuously and freely winded on various shapes of surfaces, generating a conformal TIM for a broad spectrum of applications.
Highly aligned and densified carbon nanotube films with superior thermal conductivity and mechanical strength

Hang Zhan,Yu Wen Chen,Qiang Qiang Shi,Yu Zhang,Run Wei Mo,Jian Nong Wang

DOI: https://doi.org/10.1016/j.carbon.2021.09.069

IF: 10.9

2022-01-01

Carbon

Abstract:Flexible thermal conducting materials with the combination of excellent thermal conductivity and mechanical strength are highly desired for many practical applications, but meeting this strict requirement remains as a big challenge. Herein, facile preparation of highly aligned carbon nanotube (CNT) films is demonstrated, which involves the continuous production of a hollow cylindrical CNT assembly, followed by in-situ alignment of CNTs through optimizing the winding rate and a further stretching-pressing process. Benefiting from the resultant excellent CNT alignment and high density (1.59 ± 0.05 g cm−3), the CNT film simultaneously has a high thermal conductivity of 558.06–700.15 W m−1 K−1, electrical conductivity of 4870 ± 150 S cm−1, mechanical strength of 2.74–2.95 GPa, and Young's modulus of 55.2–58.9 GPa. The combination of such high thermal and mechanical properties is outstanding for carbon-based thermal conducting materials. Furthermore, the CNT material exhibits negligible structural and mechanical decay even after 500 cycles of bending test. Our study provides an effective strategy toward developing new thermal conducting materials for applications under harsh conditions.

materials science, multidisciplinary,chemistry, physical
Carbon Nanotube‐Derived Materials for Smart Thermal Management

Ling Liu,Xiaona Wang,Hehua Jin,Jin Wang,Qingwen Li

DOI: https://doi.org/10.1002/adsu.202400757

IF: 6.737

2024-12-01

Advanced Sustainable Systems

Abstract:Thermal management employs high thermal conductivity and efficient insulation, integrating active and passive heating. Carbon nanotubes (CNTs) are highlighted for their lightweight, robust attributes and superior conductivities, playing a significant role in intelligent thermal systems. This review emphasizes CNTs' potential in enhancing thermal efficiency, insulation, and energy conversion, providing strategic insights for developing advanced thermal management solutions. Thermal management involves precisely controlling temperatures in systems, devices, or electronic products to ensure optimal performance, stability, enhanced efficiency, and lifespan, which include high thermal conductivity, superthermal insulation, and active and passive heating. Carbon nanotubes (CNTs), known for their low density, high mechanical strength, and superior thermal and electrical conductivities, represent ideal materials for lightweight, high‐strength applications, showcasing extensive benefits and potential in intelligent thermal management. This review explores the use of CNTs in improving thermal conductivity, insulation, photothermal conversion, and electrical heating, underscoring their unique advantages and broad application prospects in smart thermal management systems. Specifically, the article outlines the advantages of CNT materials in elevating thermal efficiency, enhancing insulation characteristics, and increasing energy conversion rates, offering vital scientific and technical guidance for creating innovative, next‐generation thermal management materials. By systematically analyzing and forecasting, this review provides strategic direction for the research and development of high‐performance thermal management materials, heralding the significant role of CNT materials in future studies.

materials science, multidisciplinary,green & sustainable science & technology
The Carbon Nanotube Based Nanocomposite with Enhanced Thermal Conductivity

Y. Wu,C. H. Liu,H. Huang,S. S. Fan

DOI: https://doi.org/10.4028/www.scientific.net/SSP.121-123.243

2007-01-01

Solid State Phenomena

Abstract:We present a prototype of thermal interface material (TIM) by incorporating aligned carbon nanotube arrays (CNA) into polydimethylsiloxane (PDMS). The morphology of CNA was maintained by adopting in-situ injection molding method, and the nanotube-polymer composite film was obtained by curing the PDMS at room temperature. We applied steady-state methods to measure the thermal conductivity of this kind of nanocomposite. Comparing to the pure PDMS, the thermal conductivity of the composite was greatly increased, which can be attributed to the thermal conducting passages formed by vertical aligned carbon nanotubes from one side of the film to the other. We also managed to improve the thermal conducting performance of the composite by evaporating a I-gm-thick aluminum film on the top of a raw CNA, which serves as a heat current collector to decrease the thermal contact resistance. The experiment results suggest these kinds of composites have broad application prospect for thermal management in the future.
Stretchable and Energy-Efficient Heating Carbon Nanotube Fiber by Designing a Hierarchically Helical Structure

Peng Liu,Yiming Li,Yifan Xu,Luke Bao,Lie Wang,Jian Pan,Zhitao Zhang,Xuemei Sun,Huisheng Peng

DOI: https://doi.org/10.1002/smll.201702926

IF: 13.3

2017-01-01

Small

Abstract:Inspired by the hierarchically helical structure of classical thermal insulation material-wool, a stretchable heating carbon nanotube (CNT) fiber is created with excellent mechanical and heating properties. It can be stretched by up to 150% with high stability and reversibility, and a good thermal insulation is achieved from a large amount of formed hierarchically helical voids inside. Impressively, it exhibits ultrafast thermal response over 1000 degrees C s(-1), low operation voltage of several volts, and high heating stability over 5000 cycles. These hierarchically helical CNT fibers, for the first time, are demonstrated as monofilaments to produce soft and lightweight textiles at a large scale with high heating performances.
Continuous preparation of carbon nanotube fiber and its potential applications in electrical, thermal, mechanical and biosensing fields

Yongjie Yan,Mengqi Duan,Haotian Zheng,Qi Ni,Wenbin Huang,Qing-Qing Ni

DOI: https://doi.org/10.1557/s43578-024-01289-6

IF: 2.7

2024-02-07

Journal of Materials Research

Abstract:Carbon nanotube fiber (CNTF) has promising applications in the fields of electronic devices, sensors, smart fabrics, electrochemical electrodes, electromagnetic shielding, electric heating elements, and composite materials due to its excellent thermal and electrical properties. In this research, the CNTF was continually prepared through floating catalyst chemical vapor deposition (CVD) using a systematic high-temperature shaft furnace equipment. As for applications, an electrochemical electrode based on the CNTF wrapping showed stronger current responding signal due to its high specific surface. Then, a CNTF-based electrothermal element could heat 25 ml water up to 40 °C within 0.5 h. After that, a unidirectional electrically conductive tape based on the CNTF showed different electromagnetic shielding with changing wave vibration direction. Following with that, a CNTF tubular composite was also successfully fabricated showed more light-weight property. Finally, the electrical variation under different forces was studied for the exploration of the CNTF in implantable biosensing electrode.Graphical abstract

materials science, multidisciplinary
Carbon Nanotube Films with Ultrahigh Thermal-Shock and Thermal-Shock-fatigue Resistance Characterized by Ultra-Fast Ascending Shock Testing

Mingquan Zhu,Shijun Wang,Yunxiang Bai,Feng Gao,Zhenxing Zhu,Congying Wang,Peng Zhang,Hao Jin,Hui Zhang,Luqi Liu,Zhiping Xu,Xinghong Zhang,Fei Wei,Zhong Zhang

DOI: https://doi.org/10.1007/s12274-024-6684-4

IF: 9.9

2024-01-01

Nano Research

Abstract:The exploration of material failure behavior not only involves defining its limits and underlying mechanisms but also entails devising strategies for improvement and protection in extreme conditions. We’ve pioneered an advanced multi-scale, high-speed ascending thermal shock testing platform capable of inducing unprecedented heat shocks at rates surpassing 105 °C/s. Through meticulous examination of the thermal shock responses of carbon nanotube (CNT) films, we’ve achieved remarkable breakthroughs. By employing an innovative macro-scale synchronous tightening and relaxing approach, we’ve attained a critical temperature differential in CNT films that exceeds an exceptional 2500 °C—surpassing any previously reported metric for high-performance, thermal-shock-resistant materials. Notably, these samples have demonstrated exceptional resilience, retaining virtually unchanged strength even after enduring 10,000 thermal shock cycles at temperatures exceeding 1000 °C. Furthermore, our research has revealed a novel thermal shock/fatigue failure mechanism that fundamentally diverges from conventional theories centered on thermal stress.
Interface Engineering for High-Performance Thermoelectric Carbon Nanotube Films

Ying Zhou,Qingshuo Wei,Minfang Zhang,Hideaki Nakajima,Toshiya Okazaki,Takeo Yamada,Kenji Hata

DOI: https://doi.org/10.1021/acsami.3c15704

IF: 9.5

2023-12-20

ACS Applied Materials & Interfaces

Abstract:Carbon nanotubes (CNTs) stand out for their exceptional electrical, thermal, and mechanical attributes, making them highly promising materials for cutting-edge, lightweight, and flexible thermoelectric applications. However, realizing the full potential of advanced thermoelectric CNTs requires precise management of their electrical and thermal characteristics. This study, through interface optimization, demonstrates the feasibility of reducing the thermal conductivity while preserving robust...

materials science, multidisciplinary,nanoscience & nanotechnology
Long-Term Stable Thermal Emission Modulator Based on Single-Walled Carbon Nanotubes

Dezhuang Ji,Xuan Li,Moh’d Rezeq,Wesley Cantwell,Lianxi Zheng

DOI: https://doi.org/10.1021/acsami.3c06952

IF: 9.5

2023-08-02

ACS Applied Materials & Interfaces

Abstract:Dynamic control of a material's thermal emission could enable many emerging applications, such as thermal camouflage and infrared (IR) display. Low-dimensional carbon nanomaterials have shown great potential in these applications because of their tuneability in charge density via static gating or ionic intercalation. Herein, a thermal emission modulator based on single-walled carbon nanotubes (SWCNTs) is realized by ionic gating. The Fermi energy of the SWCNTs is shifted via the adsorption of...

materials science, multidisciplinary,nanoscience & nanotechnology
Aligned Carbon Nanotube Composite Films for Thermal Management

H Huang,CH Liu,Y Wu,SS Fan

DOI: https://doi.org/10.1002/adma.200500467

IF: 29.4

2005-01-01

Advanced Materials

Abstract:An ideal composite film based on a carbon nanotube (CNT) array for 0 thermal management applications is prepared using "in-situ injection molding". The aligned CNTs with their tips protruding out of both surfaces form ideal thermal conducting paths between surfaces. Much better thermal conductivity improvements can be achieved at low CNT loadings compared with dispersed CNT composites.
Simultaneously Enhanced Tenacity, Rupture Work, and Thermal Conductivity of Carbon Nanotubes Fibers by Increasing the Effective Tube Contribution

Xiao Zhang,Michael De Volder,Wenbin Zhou,Liron Issman,Xiaojun Wei,Adarsh Kaniyoor,Jeronimo Terrones Portas,Fiona Smail,Zibo Wang,Yanchun Wang,Huaping Liu,Weiya Zhou,James Elliott,Sishen Xie,Adam Boies

DOI: https://doi.org/10.48550/arXiv.2204.04468

2022-04-09

Materials Science

Abstract:Although individual carbon nanotubes (CNTs) are superior as constituents to polymer chains, the mechanical and thermal properties of CNT fibers (CNTFs) remain inferior to commercial synthetic fibers due to the lack of synthesis methods to embed CNTs effectively in superstructures. The application of conventional techniques for mechanical enhancement resulted in a mild improvement of target properties while achieving parity at best on others. In this work, a Double-Drawing technique is developed to deform continuously grown CNTFs and rearrange the constituent CNTs in both mesoscale and nanoscale morphology. Consequently, the mechanical and thermal properties of the resulting CNTFs can be jointly improved, and simultaneously reach their highest performances with specific strength (tenacity) $\rm\sim3.30\,N\,tex^{-1}$, work of rupture $\rm\sim70\,J\,g^{-1}$, and thermal conductivity $\rm\sim354\,W\,m^{-1}\,K^{-1}$, despite starting from commercial low-crystallinity materials ($I{\rm_G}:I{\rm_D}\sim5$). The processed CNTFs are more versatile than comparable carbon fiber, Zylon, Dyneema, and Kevlar. Furthermore, based on evidence of load transfer efficiency on individual CNTs measured with In-Situ Stretching Raman, we find the main contributors to property enhancements are (1) the increased proportion of load-bearing CNT bundles and (2) the extension of effective length of tubes attached on these bundles.
Improving thermal shock and ablation resistance of high thermal conductivity carbon/carbon composites by introducing carbon nanotubes

Xue-Song Liu,Qian-Gang Fu,Han-Hui Wang,Ming-De Tong,Jia-Ping Zhang,Qiang Song

DOI: https://doi.org/10.1007/s42823-020-00144-y

2020-05-04

Carbon letters

Abstract:In order to improve the thermal shock and ablation resistance of high thermal conductivity carbon/carbon composites, carbon nanotubes (CNTs) were introduced by electrophoretic deposition. After modification, the flexural strength of the composites increases by 53.0% due to the greatly strengthened interfaces. During thermal shock between 1100 °C and room temperature for 30 times, the strength continues to increase, attributed to the weakened interfaces in favor of fiber and CNT pull-out. By introducing CNTs at interfaces, thermal conductivity of the composites along the fiber axial direction decreases and that along the fiber radial direction increases. As the thermal shock process prolongs, since the carbon structure integrity of CNT and matrix in the modified composites is improved, the conductivity increases whatever the orientation is, until the thermal stress causes too many defects. As for the anti-ablation performance, the mass ablation rates of the CNT-modified composites with fibers parallel to and vertical to the flame decrease by 69.6% and 43.9% respectively, and the difference in the mass ablation rate related with fiber orientations becomes much less. Such performance improvement could be ascribed to the reduced oxidative damage and the enhanced interfaces.

materials science, multidisciplinary,chemistry
A Novel Continuous Carbon Nanotube Fiber/carbon Composite by Electrified Preform Heating Chemical Vapor Infiltration

Lei Feng,Qiangang Fu,Qiang Song,Yanling Yang,Yu Zuo,Guoquan Suo,Xiaojiang Hou,Li Zhang,Xiaohui Ye

DOI: https://doi.org/10.1016/j.carbon.2019.11.009

IF: 10.9

2019-01-01

Carbon

Abstract:The extraordinary mechanical and physical properties of carbon nanotubes (CNTs) have provided the impetus in developing a new promising CNT/carbon (CNT/C) composite, which may effectively alleviate the shortcomings of sharp-angle and thin-walled C/C components in mechanical performance. Present researches on preparing CNT/C composites focus on infiltrating pyrocarbon into CNT assemblies such as array, block, sheet, film, and buckypaper using complicated and time-consuming methods. Here, we report a facile and efficient strategy for preparing CNT fiber/C composites via electrified preform heating chemical vapor infiltration. Densification process is identified as continual deposition of pyrocarbon around CNTs (called coaxial structure) and further deposition among them, which can be accomplished in short time. Small-diameter (below 500 nm) coaxial structures give composites high deformability; larger ones coupled with bridging action of pyrocarbon among them result in better load transfer and more conductive pathways. Optimized CNT fiber/C composites demonstrate impressive tensile strength (205 MPa) and excellent conductivity (431 S/cm), which are comparable to the previously reported C/C and CNT/C composites. Moreover, such composites exhibit lightweight (1.21 g/cm(3)), good deformability and high fracture strain. Our work could open up a general strategy for efficiently fabricating various high-performance CNT/C composites that could be used in high-temperature aerospace fields. (C) 2019 Elsevier Ltd. All rights reserved.
Fluorinated Carbon Nanotube/Nanofibrillated Cellulose Composite Film with Enhanced Toughness, Superior Thermal Conductivity, and Electrical Insulation

Xiongwei Wang,Peiyi Wu

DOI: https://doi.org/10.1021/acsami.8b12565

2018-09-12

Abstract:Recently, graphene and carbon nanotubes (CNTs) promise considerable application potentials in the highly efficient thermal management of high-power devices because of their superb thermal conductivity (TC). However, the high electrical conductivity hampers their use in some fields where electrical insulating components are always required. Herein, to coordinate the thermal and electrical conductivity of CNT, fluorinated CNT (FCNT) was first used as a thermally conductive filler to prepare composite film with nanofibrillated celluloses (NFCs) via facile vacuum-assisted filtration. The obtained composite film shows a well-organized layered structure of the building blocks along the planar direction. Moreover, the one-dimensional structure of NFCs and the strong interaction of NFCs and FCNTs ensure sufficient connection between FCNT themselves and the reduced interfacial thermal resistance of NFCs/FCNTs, so that efficient heat transfer pathways can be well reserved, leading to simultaneous accessibility of high in-plane TC of 14.1 W m<sup>-1</sup> K<sup>-1</sup> and favorable electrical insulation property at an FCNT content of 35 wt %. Despite such a high FCNT loading, the strong interaction between NFCs and FCNTs enables the composite film to possess enhanced toughness, reliable mechanical strength, and flexibility. Therefore, we think that these outstanding comprehensive properties guarantee that the prepared composite film has promising applications in heat dissipation of next-generation portable and collapsible electronic devices.

materials science, multidisciplinary,nanoscience & nanotechnology
A review of aligned carbon nanotube arrays and carbon/carbon composites: fabrication, thermal conduction properties and applications in thermal management

Zhi-jun Dong,Bing Sun,Hui Zhu,Guan-ming Yuan,Bao-liu Li,Jian-guang Guo,Xuan-ke Li,Ye Cong,Jiang Zhang

DOI: https://doi.org/10.1016/s1872-5805(21)60090-2

IF: 5.7

2021-10-01

New Carbon Materials

Abstract:The development of modern technology has posed greater and more urgent needs for thermal management materials. Aligned carbon nanotube arrays and carbon/carbon composites have aroused extensive interest as ideal lightweight and stable thermal management materials because of their low thermal expansion coefficient, excellent thermal conduction and high-temperature resistance. Here, we first review the thermal conducting mechanism of carbon materials. We then describe the general fabrication methods, the main factors affecting the thermal conductivity of aligned carbon nanotube arrays and carbon/carbon composites as well as their use in thermal management. The preparation-structure-performance relationships are outlined and the strategies for achieving high thermal conductivity are summarized. Finally, a critical consideration of the challenges and prospects in the thermal management applications of aligned carbon nanotubes and carbon/carbon composites is given.

materials science, multidisciplinary

A carbon nanotube approach for efficient thermally insulating material with high mechanical stability and fire-retardancy

Carbon Nanotube-Based Super Nanotubes: Tunable Thermal Conductivity in Three Dimensions

Low Interfacial Thermal Resistance Between Crossed Ultra-Thin Carbon Nanothreads

Carbon-nanotube-templated Carbon Nanofibers with Improved Mechanical Performance

Nano-engineering Thermal Transport Performance of Carbon Nanotube Networks with Polymer Intercalation: a Molecular Dynamics Study.

Thermal Conductivity of A New Carbon Nanotube Analog: the Diamond Nanothread

Carbon Nanostructure Enabled High Performance Thermal Insulating Material

Highly aligned and densified carbon nanotube films with superior thermal conductivity and mechanical strength

Carbon Nanotube‐Derived Materials for Smart Thermal Management

The Carbon Nanotube Based Nanocomposite with Enhanced Thermal Conductivity

Stretchable and Energy-Efficient Heating Carbon Nanotube Fiber by Designing a Hierarchically Helical Structure

Continuous preparation of carbon nanotube fiber and its potential applications in electrical, thermal, mechanical and biosensing fields

Carbon Nanotube Films with Ultrahigh Thermal-Shock and Thermal-Shock-fatigue Resistance Characterized by Ultra-Fast Ascending Shock Testing

Interface Engineering for High-Performance Thermoelectric Carbon Nanotube Films

Long-Term Stable Thermal Emission Modulator Based on Single-Walled Carbon Nanotubes

Aligned Carbon Nanotube Composite Films for Thermal Management

Simultaneously Enhanced Tenacity, Rupture Work, and Thermal Conductivity of Carbon Nanotubes Fibers by Increasing the Effective Tube Contribution

Improving thermal shock and ablation resistance of high thermal conductivity carbon/carbon composites by introducing carbon nanotubes

A Novel Continuous Carbon Nanotube Fiber/carbon Composite by Electrified Preform Heating Chemical Vapor Infiltration

Fluorinated Carbon Nanotube/Nanofibrillated Cellulose Composite Film with Enhanced Toughness, Superior Thermal Conductivity, and Electrical Insulation

A review of aligned carbon nanotube arrays and carbon/carbon composites: fabrication, thermal conduction properties and applications in thermal management