Abstract:In the automotive industry, there has been considerable focus on developing various sensors for engine oil monitoring. However, when it comes to monitoring the condition of brake fluid, which is crucial for ensuring safety, there has been a lack of a secure online method for this monitoring. This study addresses this gap by developing a hybrid silica nanofiber mat, or an aerogel integrated with an optical fiber sensor, to monitor brake fluid condition. The incorporation of silica nanofibers in this hybrid enhances the sensitivity of the optical fiber glass surface by at least 3.75 times. Furthermore, creating an air gap between the glass surface of the optical fiber and the nanofibers boosts sensitivity by at least 5 times, achieving a better correlation coefficient (R2 = 0.98). In the case of silica aerogel, the sensitivity is enhanced by 10 times, but this enhancement relies on the presence of the established air gap. The air gap was adjusted to range from 0.5 mm to 1 mm, without any significant change in the measurement within this range. The response time of the developed sensor is a minimum of 15 min. The sensing material is irreversible and has a diameter of 2.5 mm, making it easily replaceable. Overall, the sensor demonstrates strong repeatability, with approximately 90% consistency, and maintains uncertainty levels below 5% across specific ranges: from 3% to 6% for silica aerogel and from 5% to 6% for silica nanofibers in the presence of an air gap. These findings hold promise for integrating such an optical fiber sensor into a car's electronic system, enabling the direct online monitoring of brake fluid quality. Additionally, the study elucidates the effect of water absorption on the refractive index of brake fluid, as well as on the silica nanomaterials.

Side-polished fiber sensor for measurement of the color concentration in lubricant products

A Dual-Mode Optical Fiber Sensor for SERS and Fluorescence Detection in Liquid

Refractive Index Sensor Based on Double Side-Polished U-Shaped Plastic Optical Fiber

Optical fiber chemical sensing of anionic surfactants using a microfluidic polymer chip with embedded ion-selective fluorescence optode

A High-Precision D-Shaped Fiber Polishing Method and its Sensing Characteristics of Different Polishing Depths

Spectra modulated surface plasmon resonance sensor based on side polished multi-mode optical fiber]

Turbidity and RI Dependency of a Polymer Optical Fiber-Based Chromatic Sensor

In-line micro-spectrometer with a structural color polymer filter for the color and concentration monitoring system

Contactless Low-Cost Position Sensor Using a D-Shaped Polymer Optical Fiber

Side-Polished D-Type Fiber SPR Sensor for RI Sensing With Temperature Compensation

Citrate polymer optical fiber for measuring refractive index based on LSPR sensor

Intensity Modulation based U shaped Plastic Optical Fiber Refractive Index Sensor

Linear Fiber Laser Configurations for Optical Concentration Sensing in Liquid Solutions

A Low-Cost Relative Humidity Sensor Using Polymer Optical Fiber Based on Intensity Variation

Characterization of SPR Sensor Utilizing Side Polished Fiber

Brake Fluid Condition Monitoring by a Fiber Optic Sensor Using Silica Nanomaterials as Sensing Components

Optical Fiber Sensor for Heavy Chemical Detection: An Overview

Non-invasive Measurement of Acid Value of Lubricant Using Visible and Near Infrared Spectroscopy

High Sensitive Refractive Index Sensor Based on Dispersion Turning Point Long-Period Fiber Gratings in Tapered Fiber

High pressure sensor based on intensity-variation using polymer optical fiber

Side-Polished DBR Fiber Laser with Enhanced Sensitivity for Axial Force and Refractive Index Measurement