Abstract:In the United States, the Nuclear Waste Policy Act of 1982 mandated centralised storage of spent nuclear fuel by 1988. However, the Yucca Mountain project is currently scheduled to start accepting spent nuclear fuel in 2010. Since many nuclear power plants were only designed for -10 y of spent fuel pool storage, > 35 plants have been forced into alternate means of spent fuel storage. In order to continue operation and make room in spent fuel pools, nuclear generators are turning towards independent spent fuel storage installations (ISFSIs). Typical vertical concrete ISFSIs are -6.1 m high and 3.3 m in diameter. The inherently large system, and the presence of thick concrete shields result in difficulties for both Monte Carlo (MC) and discrete ordinates (SN) calculations. MC calculations require significant variance reduction and multiple runs to obtain a detailed dose distribution. SN models need a large number of spatial meshes to accurately model the geometry and high quadrature orders to reduce ray effects, therefore, requiring significant amounts of computer memory and time. The use of various differencing schemes is needed to account for radial heterogeneity in material cross sections and densities. Two P3, S12, discrete ordinate, PENTRAN (parallel environment neutral-particle TRANsport) models were analysed and different MC models compared. A multigroup MCNP model was developed for direct comparison to the SN models. The biased A3MCNP (automated adjoint accelerated MCNP) and unbiased (MCNP) continuous energy MC models were developed to assess the adequacy of the CASK multigroup (22 neutron, 18 gamma) cross sections. The PENTRAN SN results are in close agreement (5%) with the multigroup MC results; however, they differ by -20-30% from the continuous-energy MC predictions. This large difference can be attributed to the expected difference between multigroup and continuous energy cross sections, and the fact that the CASK library is based on the old ENDF/B-II library. Both MC and SN calculations were run in parallel on a BEOWULF PC-cluster (eight processors). Timing results indicate that the SN calculation yielded a detailed dose distribution at over 318,426 points in -164 h. Unbiased continuous energy MC required 214 h to calculate dose rates with a 1% relative error in only 18 regions on the surface of the cask. The biased A3MCNP calculations yields dose rates with -0.8% relative error in only 2.5 h on one processor. This study demonstrates that a parallel code, such as the 3-D parallel SN transport code, PENTRAN can solve a complex large problem, such as the storage cask, accurately and efficiently. Moreover, this calculation was performed on a relatively inexpensive PC-cluster. Possible inadequacies of the CASK cross section library still need to be evaluated.

Accurate Simulation of Neutrons in Less Than One Minute Pt. 2: Sandman—GPU-Accelerated Adjoint Monte-Carlo Sampled Acceptance Diagrams

A fast GPU-based Monte Carlo simulation of proton transport with detailed modeling of non-elastic interactions

A GPU-accelerated Monte Carlo code, RT2for coupled transport of photon, electron/positron, and neutron

Comparison of Nested Geometry Treatments within GPU-Based Monte Carlo Neutron Transport Simulations of Fission Reactors

Open-Source Optimization of Hybrid Monte-Carlo Methods for Fast Response Modeling of NaI(Tl) and HPGe Gamma Detectors

EVALUATION OF SPEEDUP OF MONTE CARLO CALCULATIONS OF TWO SIMPLE REACTOR PHYSICS PROBLEMS CODED FOR THE GPU/CUDA ENVIRONMENT

Prompt: Probability-Conserved Cross Section Biasing Monte Carlo Particle Transport System

Real-time dose computation: GPU-accelerated source modeling and superposition/convolution

Neutron Generation Based Method for Monte Carlo Three-Dimensional Reactor Time-Dependent Simulation

A general-purpose Monte Carlo particle transport code based on inverse transform sampling for radiotherapy dose calculation

Monte-Carlo Methods for the Neutron Transport Equation

Simulating neutron transport in long beamlines at a spallation neutron source using Geant4

Synthesizing Particle-in-Cell Simulations Through Learning and GPU Computing for Hybrid Particle Accelerator Beamlines

Research on Fast-Doppler-Broadening of Neutron Cross Sections

Performance Portable Monte Carlo Neutron Transport in MCDC via Numba

GPU-Accelerated Monte Carlo Electron Transport Methods: Development and Application for Radiation Dose Calculations Using Six GPU cards

CPU–GPU-coupled acceleration method for point flux calculation in Monte Carlo particle transport

GPU-accelerated 3D neutron diffusion code based on finite difference method

GPU-based fast Monte Carlo simulation for radiotherapy dose calculation

Neutron analysis of spent fuel storage installation using parallel computing and advance discrete ordinates and Monte Carlo techniques

Development of a dose estimation code for BNCT with GPU accelerated Monte Carlo and collapsed cone Convolution method