Abstract:Orthopedic implants need to be coated with biomedical coatings that can facilitate osseointegration and mitigate bacterial biofilm formation. Using anodisation and electrodeposition techniques, we modified Ti implants with a double-layer coating made of TiO2 nanotubes (TNT) and hydroxyapatite that was codoped with silver and manganese (AgMnHA). The silver incorporation into hydroxyapatite improves its antimicrobial properties, and the manganese doping offsets the potential cytotoxicity of the incorporated silver. The AgMnHA and the TNT films were characterized with X-ray diffraction, Fourier-transform infrared spectroscopy, scanning electron microscopy, energy-dispersive X-ray spectroscopy, and X-ray photoelectron spectroscopy. The results highlight that the manganese and silver ions were evenly incorporated into the AgMnHA/TiO2 coating. Its adhesion strength significantly increased because of the interlocking of the rough TiO2 layer with the bioceramic particles that entered into the voids of the TiO2 nanotubes. The coating decreases the corrosion current density of titanium from 3.71μA to 0.19μA, and increases its corrosion resistance by almost two orders of magnitude. The coating can continuously release silver ions into the bacterial suspension, resulting in excellent antimicrobial efficacy with a 100% reduction in viable cells. Both hydroxyapatite and the AgMnHA/TiO2 coating are super-hydrophilic; meanwhile, if immersed in a simulated body fluid, they could induce the deposition of typical spherical apatite. In-vitro cell culture tests demonstrated that hydroxyapatite and the AgMnHA/TiO2 coating considerably improved the cell viability and the alkaline phosphatase (ALP) activity. Therefore, the AgMnHA coating has no significant cytotoxicity on osteoblasts, and could generate sufficient osteoblast differentiation for osseointegration. We therefore find that a bilayer AgMnHA/TiO2 coating on Ti implants improves antibiofilm properties that does not offset the hydroxyapatite biocompatibility that is needed for successful osseointegration and bone healing.

Plasma Spray Deposition of HA–TiO2 Composite Coating on Ti–6Al–4V Alloy for Orthopedic Applications

Hydroxyapatite Coating on Ti-6Al-7Nb Alloy by Plasma Electrolytic Oxidation in Salt-Based Electrolyte

Biomimetic Hydroxyapatite Growth on Functionalized Surfaces of Ti-6Al-4V and Ti-Zr-Nb Alloys

Development of Hydroxyapatite Coating on Titanium Alloy for Orthopedic Applications

Plasma spray of biofunctional (Mg, Sr)-substituted hydroxyapatite coatings for titanium alloy implants

On surface Modification of Ti Alloy by Electro Discharge Coating Using Hydroxyapatite Powder Mixed Dielectric with Graphite Tool

Preparation of an Electrodeposited Hydroxyapatite Coating on Titanium Substrate Suitable for In-Vivo Applications

Characterization and corrosion behavior of plasma sprayed calcium silicate reinforced hydroxyapatite composite coatings for medical implant applications

Impact of post-heat-treatment on the surface-roughness, residual stresses, and micromorphology characteristics of plasma-sprayed pure hydroxyapatite and 7%-Aloxite reinforced hydroxyapatite coatings deposited on titanium alloy-based biomedical implants

A Prospective Material for Orthopedic Applications: Ti Substrates Coated with a Composite Coating of a Titania-Nanotubes Layer and a Silver-Manganese-doped Hydroxyapatite Layer

Development of Plasma-sprayed Bioactive Hydroxyapatite Coatings on Titanium Alloy Substrate

In Vitro Biocompatibility of a Nanocrystalline Β-Ta2o5 Coating for Orthopaedic Implants

Characterization and Corrosion Evaluation of Tio2:N-Ha Coatings on Titanium Alloy Formed by Plasma Electrolytic Oxidation

Microstructure and biocompatibility of porous-Ta/Ti-6Al-4 V component produced by laser powder bed fusion for orthopedic implants

Preparation of Cu 2+ /TA/HAP composite coating with anti-bacterial and osteogenic potential on 3D-printed porous Ti alloy scaffolds for orthopedic applications

Characterization of Functionally Graded Hydroxyapatite/titanium Composite Coatings Plasma‐sprayed on Ti Alloys

Electrohydrodynamic Coating of Metal with Nano-Sized Hydroxyapatite.

Microwave sintering of porous Ti–Nb-HA composite with high strength and enhanced bioactivity for implant applications

In Vitro Evaluation of Biologically Derived Hydroxyapatite Coatings Manufactured by High Velocity Suspension Spraying

A Study on Hybrid Bioceramic Coatings of HA/poly(vinyl Acetate) Co-Deposited Electrochemically on Ti–6Al–4V Alloy Surface

Mechanical and Corrosion Properties of Ti-35Nb-7Zr- X HA Composites Fabricated by Spark Plasma Sintering