Abstract:Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Ahead of Print. Wear of rolling elements can produce a huge impact on the mechanical properties of screw-nut joint, and is one of primary causes resulting in the accuracy degradation or even failure of kinematic pairs. Many mechanical models have been constructed to investigate the vibration performance of rolling elements. But the wear influence is considered scarcely because of the complicacy of loading status and wear process. In this study, a novel wear prediction model can be proposed for screw-nut joint to overcome the above difficulty. An ultimate stiffness model can be constructed on basis of the wear model. The influences of running distance, external forces, preload, and structural parameters on wear performance are researched. A dynamic model of screw-nut joint with varying stiffness is constructed to carry out a detailed study on its vibration performance, particularly taking into account the coupling effect between wear and vibration. The influences of wear on the axial stiffness and vibration characteristics are studied based on the proposed model. Moreover, the change rules of axial stiffness and dynamic response under variable preloads are researched. The results indicate that the choice of parameters can produce an appreciable impact on the wear rate. The wear can result in the losses of stiffness and critical displacement of screw-nut joint. Although increasing the preload can improve the stiffness and the critical displacement, it also aggravates the wear degree. When the relative displacement between nut and screw is greater than the critical displacement, the balls with preload and axial force in opposite directions will be out of action, and the monotonic property of stiffness will also change. Due to the monotonicity of stiffness is not consistent before and after the critical displacement point, the amplitude-frequency curve presents a jumping phenomenon.

Loosening and Strength Failure Calculation Models of Screwed Joints Under Complex Working Condition Loading

Mechanical Behavior of Loose High-Strength Bolted Connections with Thin Sheet Steels

Degradation and failure analysis of bolted joints under transverse loading

Analytical Modeling of Self-Loosening of Bolted Joints Subjected to Transverse Loading

Analysis of competitive failure life of bolt loosening and fatigue

Model and nonlinear dynamic characteristics analysis of screw-nut joint considering coupling effect of wear and vibration

Critical load determination for preventing rotational loosening in bolted joints under dynamic transverse loads

Progress in Theoretical Modelling of Macroscopic and Microscopic Dynamics of Bolted Joints in Complex Equipment

Component Structural Equivalent Research Based on Different Failure Strength Criterions and the Theory of Critical Distance

A study on the stability bearing capacity of fastener-style tubular steel formwork-supports

An Analytical Model For Rotation Stiffness And Deformation Of An Antiloosening Nut Under Locking Force

An improved 3D model of composite bolted joints with detailed thread structure and progressive damage analysis of realistic tightening process

Finite Element Modeling of Early Stage Self-loosening of Bolted Joints

The Tightening and Untightening Modeling and Simulation of Bolted Joints

Failure Evolution Analysis of End-Plate Connection Joint Based on Structural Stressing State Theory

Reliability evaluation method of anti-loosening performance of bolted joints

Viscous Friction Effect During the Process of Tightening and Loosening of Bolted Joints

Contact Pressure Distribution and Pressure Correction Methods of Bolted Joints under Mixed-Mode Loading

Critical-load calculation method of bolt competitive failure under composite excitation

Method for Evaluating Bolt Competitive Failure Life Under Composite Excitation

A Review of Cross-Scale Theoretical Contact Models for Bolted Joints Interfaces