Abstract:Plasmonic surface lattice resonances (SLRs) supported by metal nanoparticle arrays have a range of appealing characteristics such as extremely narrow linewidths and greatly enhanced near fields, and thus are attractive in diverse applications. Improving the quality factor of SLRs is important for many applications and thus it has been the focus in this field. In this work, we report high quality out-of-plane SLRs supported by two-dimensional metal nanohemisphere arrays embedded in a symmetric dielectric environment. These SLRs, excited under oblique incidence with TM polarization, can have an ultra-narrow resonant linewidth (~ 0.9 nm) at visible wavelengths around 715 nm. This corresponds to an exceptionally high quality factor of 794, which is ten times that of the widely-adopted nanorods. We attribute this striking performance to the nanohemisphere geometry, which greatly relaxes the stringent requirement on the height of nanoparticles for supporting out-of-plane SLRs, reducing the absorption loss, and in which the out-of-plane oscillations are much stronger than in-plane ones, leading to stronger inter-particle coupling. The tuning of the resonance wavelength and the quality factor can be explained by a qualitative approach based on the detuning between the Rayleigh anomaly and the localized surface plasmon resonance of an isolated nanoparticle. We expect this work will advance the engineering and applications of high quality SLRs.
What problem does this paper attempt to address?
The problem that this paper attempts to solve is to achieve surface lattice resonances (SLRs) with an extremely high quality factor in the visible light band. Specifically, the researchers achieved such high - quality - factor surface lattice resonances in a symmetric dielectric environment by using a two - dimensional gold nanometer - hemisphere array. The paper mentions that this resonance is excited under TM polarization, has an ultra - narrow linewidth (about 0.9 nm), and the corresponding quality factor is as high as 794, which is ten times higher than that of the widely used gold nanorods. In addition, the study also explored methods for tuning the resonance wavelength and quality factor by adjusting the diameter of the nanometer - hemisphere, the lattice period, and the incident angle, and explained the physical principles behind these tuning mechanisms.
### Main problems and solutions
1. **Improving the quality factor of SLRs**:
- **Problem**: The existing SLRs have a relatively low quality factor, especially in the visible light band.
- **Solution**: By using a gold nanometer - hemisphere array, the study found that this structure can significantly improve the quality factor of SLRs, reaching 794, much higher than that of traditional gold nanorods (with a quality factor of about 152).
2. **Tuning the resonance wavelength and quality factor**:
- **Problem**: How to effectively tune the resonance wavelength and quality factor of SLRs.
- **Solution**: The study found that by adjusting the diameter of the nanometer - hemisphere, the lattice period, and the incident angle, the resonance wavelength and quality factor can be effectively tuned. In particular, when the Rayleigh anomaly (RA) wavelength is close to the localized surface plasmon resonance (LSPR) wavelength of a single nanoparticle, the highest quality factor can be achieved.
### Physical explanations
- **Strong out - of - plane dipole coupling**: The out - of - plane dipole coupling in the gold nanometer - hemisphere array is stronger than the in - plane dipole coupling, resulting in a higher quality factor.
- **Tuning of Rayleigh anomaly and LSPR**: By adjusting the relationship between the RA wavelength and the LSPR wavelength, the quality factor of SLRs can be optimized. When the RA wavelength is slightly red - shifted, the quality factor reaches its maximum value.
### Experimental and simulation results
- **Reflection and transmission spectra**: The experimental and simulation results show that the reflection and transmission spectra of the gold nanometer - hemisphere array under TM polarization exhibit Fano - type asymmetric peak and valley characteristics, where the linewidth of the valley is very narrow and the quality factor is as high as 794.
- **Near - field distribution**: The near - field distribution map shows that the electric field intensity of the gold nanometer - hemisphere array at the resonance wavelength is significantly enhanced and is mainly dominated by the out - of - plane component.
### Conclusions
By using a gold nanometer - hemisphere array, the study has successfully achieved out - of - plane SLRs with an extremely high quality factor. This achievement is expected to be widely applied in fields such as nano - lasers, nonlinear optics, and sensing. At the same time, the study also provides a simple and effective parameter optimization method based on the tuning of Rayleigh anomaly and LSPR, providing theoretical guidance for designing out - of - plane SLRs with a high quality factor.