Geometric- and force-induced errors compensation and uncertainty analysis of rotary axis in 5-axis ultra-precision machine tool

Qidi Chen,Sangjin Maeng,Wei Li,Zhixiong Zhou,Sangkee Min
DOI: https://doi.org/10.1007/s00170-020-05670-7
IF: 3.563
2020-07-01
The International Journal of Advanced Manufacturing Technology
Abstract:In machining of a microstructure on a free form surface, a five-axis ultra-precision machine tool has a great advantage in its flexibility and efficiency compared to a conventional machine tool. However, rotary axes in the five-axis machine tool are sensitive to position errors due to low rigidity. In addition, micro-tools, which are utilized in micro-machining, have low stiffness. The low rigidity and stiffness of the rotary axes and tool introduce geometric errors in machining. Therefore, the position and orientation errors of the rotary axes and the micro-tool must be identified and compensated. Many components contribute to uncertainty of the measurements which will inevitably reduce the reliability of the results. Therefore, it is necessary to analyze the uncertainty of each component. This paper proposed a method to comprehensively identify position-independent geometric errors (PIGEs) and force-induced errors (FIEs) of a system from the rotary axis on the machine to the micro-tool. A simple and practical error model to represent the tool position with respect to the angle of the rotary axis was built. Uncertainty was analyzed to validate the reliability of the proposed method. Cutting experiments were carried out on an AISI 1018 steel and an Al6061 workpiece, and the results were analyzed to verify the proposed model.
What problem does this paper attempt to address?
The problem that this paper attempts to solve is the geometric errors and force - induced errors (FIEs) caused by the position errors of the rotary axes and low stiffness in the 5 - axis ultra - precision machine tool. Specifically, the paper focuses on the fact that during the micro - structure machining process, the low stiffness of the rotary axes and micro - tools will lead to geometric errors, and these errors will affect the machining accuracy. Therefore, the paper proposes a method to comprehensively identify and compensate for the position - independent geometric errors (PIGEs) and force - induced errors (FIEs) from the rotary axes of the machine to the micro - tools, and analyzes the uncertainty to verify the reliability of the proposed method. By establishing a simple error model to represent the relationship between the tool position and the angle of the rotary axis, and cutting experiments are carried out to verify the validity of the model.