Abstract:Journal of Composite Materials, Ahead of Print. Laminates are produced by stacking prefabricated plies composed of fiber products. Within the aerospace industry, a ply thickness of 125 μm is commonly regarded as the standard. Ply thicknesses of less than 100 μm are generally considered as thin plies. Due to their ability to provide superior mechanical properties relative to conventional laminates thin-ply (TP) laminates are gaining interest in several high-tech industries. Although the research on TP laminates increased over the past few years, a comprehensive evaluation of the mechanical behavior of TP laminates accounting for the ply-thickness is an ongoing challenge due to the intricacies of ply interactions, and experimental difficulties. The mechanical response of fiber reinforced polymer laminates is governed by damage progression during loading, with the thickness of individual plies playing a crucial role in influencing the initiation and evolution of local cracks and failures. Therefore, in this study, the effective mechanical properties of carbon fiber reinforced polymer composite with varied ply thicknesses have been experimentally evaluated and the accumulation of the damage events has been monitored using acoustic emission measurements, utilizing a contactless laser vibrometer. In this experimental study, the ply thickness is increased in a systematic manner (ranging from 50 μm to 200 μm). Experimental investigation has been carried out in quasi-static tension and compression. The results show that unnotched TP laminates subjected to tensile loading demonstrate enhanced effective strength, attributed to less premature failure. Conversely, as the thickness of the lamina increases, there is a reduction in the overall strength of the laminate. However, in the case of the notched specimen lowest strength has been observed at a ply-thickness of 100 μm in this study. Under compressive loading, unnotched and notched specimen tends to show similar mechanical behavior to unnotched specimens under tensile loading. The overall strength is raised with decreasing ply thickness. The findings from this study may be valuable for incorporating ply-thickness considerations into models for predicting the mechanical performance of laminates under dynamic loading.

On an application of multi-material composite laminates in the aerospace sector

Novel AA7075/AA2124-SiC-17p laminated structures for aerospace applications: A Comparative study into the mechanical performance of PA6 and PA66 composite interlayers

Evaluation of material extrusion and laser-assisted in situ consolidation integrated additive manufacturing for multi-material components

Mechanical behavior of lightweight thermoplastic fiber–metal laminates

Flexural behaviours and heterogeneous interface fracture in overmoulded multi-material thermoplastic composites

Hybrid Laminated Composites Molded by Spray Lay-Up Process

On the application of strong thermoplastic–thermoset interactions for developing advanced aerospace-composite joints

Effect of Embedded Thin-Plies on the Charpy Impact Properties of CFRP Composites

Numerical Elastic-Plastic Simulation of Interlaminar Stresses in a Notched Angle-Ply Thermoplastic Composite Laminate

CF Reinforced Thermoplastic Hybrid Process Proposal for the Optimization of Sandwich Panels Stiffness and Processability

The use of discontinuous PEEK/carbon fiber thermoplastic moulding compounds for thick-section componentry

Using long fiber thermoplastic composites as substitutes for metal: design considerations

Effect of thermoplastic particles on the mechanical performance and damage failure of notched fibre metal laminates

Simulation of Laminated Composite Loading

Short fibre/unidirectional hybrid thermoplastic composites: Experimental characterisation and digital analysis

An evaluation of progressive damage analysis methods for modeling low velocity impact of thermoplastic composites

Evaluating the mechanical behavior of carbon composites with varied ply-thicknesses using acoustic emission measurements

Mechanical performance of a novel glass fiber reinforced maleic anhydride grafted polypropylene composite and its thermoplastic‐based fiber metal laminates

Experimental and Numerical Development on Multi-Material Joining Technology for Sandwich-Structured Composite Materials

Influence of Aluminum Surface Treatment on Tensile and Fatigue Behavior of Thermoplastic-Based Hybrid Laminates

Controlled interlaminar crack initiation in thin notched laminated thermoplastic composites under impact loading: A first step towards unitary layer recovery