Abstract:Journal of Reinforced Plastics and Composites, Ahead of Print. The silicon carbide particle-reinforced matrix composites, or SiCp/Al, have excellent mechanical qualities, but producing them is quite difficult since the SiC particles' and the Al matrix's properties differ greatly from one another. During the cutting process, the Ra local oscillation phenomena takes place; that is, surface roughness seems to grow, decrease, and then increase as the cutting depth increases within a particular cutting depth range while maintaining the same cutting speed and feed. To find out why this behavior occurred, a cutting experiment and a simulation analysis of SiCp/Al composites were performed. Tests were conducted to find out how varied cutting depths affected surface roughness, and a finite element model for two-dimensional cutting was created. Based on the data, it can be concluded that Ra's local oscillation phenomena is responsible for the surface quality at various cutting speeds. At 100 mm/s, 200 mm/s, 300 mm/s, and 400 mm/s, respectively, the mutation's surface quality improved by 29.6%, 14.3%, 19.6%, and 30.7% prior to the cutting depth. The analysis is justified by the fact that the depth of cut is increasing, the way in which particles are removed has changed and the percentage of scratches appears to be decreasing. As aluminium is a plastic material, plastic deformation occurs during cutting by the sub-cutting edge of the extrusion, coating the machined surfaces and producing fine cracks rather than plough furrows. In a sense, increasing the cutting thickness results in larger chips, more force on the particles in the cutting path and easier removal. At the same time, it reduces the width of the chip in future cuts, improving the surface quality of the process.

Comparison and research on simulation models of aluminum-based silicon carbide micro-cutting

Simulation of High-Speed Milling Process of Aerospace Aluminum Alloy

Three-dimensional numerical simulation for high speed milling of aerospace aluminum alloy

Numerical Simulation Study on Milling Force for Aerospace Aluminum Alloy

Study of Machining Process of SiCp/Al Particle Reinforced Metal Matrix Composite Using Finite Element Analysis and Experimental Verification

Study on the High-Speed Milling Performance of High-Volume Fraction SiCp/Al Composites

Multi-step Cutting Depth Optimization Method Based on the Removal Mechanism of SiCp/Al

Multidimensional ultrasonic vibration machining modeling of SiCp/Al cutting forces with different volume fractions: Experiments and numerical simulations

Study on the cutting mechanism of SiCp/Al considering particle size and distribution

Finite element and experimental analysis of surface integrity and surface roughness of precision machining SiCp/Al

Numerical Simulation of the Mechanical Properties and Fracture of SiCp/6061Al Composite Materials Based on Microstructure

Numerical simulation and quantitative assessment of particle distribution in SiC/Al-Si composites

Simulation and experimental investigation on the cutting mechanism and surface generation in machining SiCp/Al MMCs

Cutting Force Model of Ultrasonic Elliptical Vibration-Assisted Helical Milling of SiCp/Al Composites

Multi-phase modeling of SiC particle removal mechanism in ultrasonic vibration–assisted scratching of SiCp/Al composites

Investigation on the cutting mechanism of SiCp/Al composites in ultrasonic elliptical vibration machining

Analyzing the Effect of Particle Shape on Deformation Mechanism during Cutting Simulation of SiC P/Al Composites

Numerical simulation of microstructure for stir casting of Al-Si/SiC p composites with particle pushing model

3D microstructure simulation of stir casting SiCp/Al-7.0%Si composites

Modeling and investigation of cutting force for SiCp/Al composites during ultrasonic vibration-assisted turning

Numerical Simulation of Microstructure of Al-Si/Sicp Composites During Stir Casting Process with Particle Pushing Model