Abstract:Abstract Reynolds based thermo-elasto-hydrodynamic (TEHD) simulations of tilting pad journal bearings (TPJBs) generally provide accurate results; however, the uncertainty of the pad’s leading edge thermal boundary conditions causes uncertainty of the results. The highly complex thermal-flow mixing action between pads (BPs) results from the oil supply nozzle jets and geometric features. The conventional Reynolds approach employs mixing coefficients (MCs), estimated from experience, to approximate a uniform inlet temperature for each pad. Part I utilized complex computational fluid dynamics (CFD) flow modeling to illustrate that temperature distributions at the pad inlets may deviate strongly from being uniform. The present work retains the uniform MC model but obtains the MC from detailed three-dimensional CFD modeling and machine learning, which could be extended to the radially and axially varying MC case. The steps for implementing an artificial neural network (ANN) approach for MC regression are provided as follows: (1) utilize a design of experiment step for obtaining an adaptable training set, (2) conduct CFD simulations on the BP to obtain the outputs of the training set, (3) apply an ANN learning process by Levenverg–Mardquart backpropagation with the Bayesian regularization, and (4) couple the ANN MC results with conventional TEHD Reynolds models. An approximate log fitting method provides a simplified approach for MC regression. The effectiveness of the Reynolds TEHD TPJB model with ANN regression-based MC distributions is confirmed by comparison with CFD based TEHD TPJB model results. The method obtains an accuracy nearly the same as the complete CFD model, but with the computational economy of a Reynolds approach.

Computational Fluid Dynamics Based Mixing Prediction for Tilt Pad Journal Bearing TEHD Modeling—Part I: TEHD-CFD Model Validation and Improvements

Computational Fluid Dynamics Based Mixing Prediction for Tilt Pad Journal Bearing TEHD Modeling—Part II: Implementation With Machine Learning

A New Dynamic Mesh Algorithm for Studying the 3D Transient Flow Field of Tilting Pad Journal Bearings

Development and Validation of the 3d Temperature Field Simulation for the Tilting Pad Journal Bearings

Experimental and Theoretical Analysis of the Drag Torque in Wet Clutches

Numerical simulation of flow and heat transfer in journal bearing lubrication

A New Method for Studying the 3D Transient Flow of Misaligned Journal Bearings in Flexible Rotor-Bearing Systems

A novel transient computational fluid dynamics-fluid–structure interaction model for the pad adaptive motion and rotordynamic coefficients of hybrid porous tilting pad bearings

Development and Validation of a Three-Dimensional Computational Fluid Dynamics Analysis for Journal Bearings Considering Cavitation and Conjugate Heat Transfer

Thermo-elastohydrodynamic Lubrication Analysis on Multi-tilting-pad Journal Bearing

Numerical Investigation of Turbulence Models for a Superlaminar Journal Bearing

Thermoelastohydrodynamic Analysis of the Static Performance of Tilting-Pad Journal Bearings with the Newton–Raphson Method

Improving Combined Flow and Thermal Network Accuracy for Radially Air-Cooled Generators by Considering the Nonlinear Resistance Characteristics of T-Junction Flow

Multiphysics TEHD Model of a Tilting-Pad Thrust Bearing with Polymeric Layer

Investigation on static and dynamic characteristics of high-speed and heavy-load tilting pad journal bearings

Effects of Pad Face Thermal Distortion on Thermal Hydrodynamic Lubrication Performance of Multi-tilting-pad Journal Bearing

Numerical Investigation of Static Characteristic of a Tilting-Pad Journal Bearing Using Shear Stress Transport Model and Air Backflow

Theoretical and Experimental Investigations on Directly Lubricated Tilting Pad Journal Bearing under Starved Lubrication

Using CFD and Machine Learning to Explore Chaotic Mixing in Laminar Diameter-Transformed Stirred Tanks

An analytical model for complete dynamical coefficients of a tilting-pad journal bearing

3D Two-Way Coupled Tehd Analysis on the Lubricating Characteristics of Thrust Bearings in Pump-Turbine Units by Combining Cfd and Fea