Abstract:Rockburst is characterised by the wide occurrence areas and the long delayed time at a pumped storage power station in Heilongjiang province of China. For the study, a new method is proposed to identify the induced rockburst based on the combination of microseismic (MS) and electromagnetic radiation (EMR) monitoring methods. EMR monitoring method is introduced to make up for the shortcomings of the monitoring blind area caused by the propagation path of wave velocity during MS monitoring and a beneficial attempt is carried out for the comprehensive application of the two methods to monitor the rockburst. Firstly, a MS monitoring system is established around the underground powerhouse to recognize the propagation of micro-fracture during the deep excavation, while the typical five parameters including the frequency of the microseismic events, the total energy of daily events, energy index (EI), cumulative apparent volume (CAV) and microseismic signal b-value are analyzed to reveal the temporal and spatial evolution law of microseismic events. Secondly, an EMR monitoring system is also established near the MS events clusting area to study the characteristics of EMR produced from the fractured rock mass. The temporal and spatial variation of the two parameters including electromagnetic radiation intensity and pulse number are also analyzed and the distribution of higher values are compared with the geological structure. Finally, the correlation of electromagnetic signals, microseismic signals and local stress is studied based on theories of geophysics, electromagnetism and rock mechanics, and some credible results are obtained. Here are the following resluts: (1) The microseismic events are characterized by spatial clustering, and the joint action of the excavation disturbance and the weak structure body of the surrounding rock mass are the main factors for rockburst. The trend of sharp decrease of energy index and sudden increase of cumulative apparent volume generally indicates the occurrence of rockburst or macro-fracture. The magnitude of b value indicates that the rockburst failure type in the project belongs to fracture-slip rockburst. (2) The sudden change of electromagnetic radiation intensity in the fault fracture zone of the underground powerhouse can be used as the precursor information of rockburst or large-scale rupture events.(3) The micro-fracture activities revealed by EMR and MS methods are consistent in spatial distribution. The distribution of the peak values of electromagnetic radiation pulse number are basically consistent with the direction of the apparent stress migration disturbed by the field construction situation. So we can infer that it will play an important role to improve the accuracy of rockburst prediction based on the analysis of the multi-source singals.

Early-warning of rock burst in coal mine by low-frequency electromagnetic radiation

Characters of Electromagnetic Radiation in Coal and Its Application in Forecast of Coal and Gas Outburst

Precursor Signal Identification and Acoustic Emission Characteristics of Coal Fracture Process Subjected to Uniaxial Loading

Improving Mining Sustainability and Safety by Monitoring Precursors of Catastrophic Failures in Loaded Granite: An Experimental Study of Acoustic Emission and Electromagnetic Radiation

Study on the effects of temperature and immersion on the acoustic emission and electromagnetic radiation signals of coal rock damage under load

The Frequency Characteristics of Vibration Events in an Underground Coal Mine and Their Implications on Rock Burst Monitoring and Prevention

Microseismic Temporal-Spatial Precursory Characteristics and Early Warning Method of Rockburst in Steeply Inclined and Extremely Thick Coal Seam

Prediction of rockbursts in a typical island working face of a coal mine through microseismic monitoring technology

Changes in Frequency of Electromagnetic Radiation from Loaded Coal Rock

Failure characteristics of coal-rock combined bodies based on acoustic emission signals

Study on main Frequency precursor characteristics of Acoustic Emission from Deep buried Dali Rock explosion

Study on the Nonlinear Characteristics of EMR and AE during Coal Splitting Tests

Regional local integrated rockburst monitoring and early warning for multi-seam mining

Research on the attenuation characteristics of seismic energy in multicoal seam mining and the warning method of rock burst

Time-frequency evolution law and generation mechanism of electromagnetic radiation in coal friction process

Microseismic comprehensive evaluation method for coal burst: a case study in the Zhaolou Coal Mine

Comprehensive monitoring for rockburst at a pumped storage power station in northeast China

Method for rock fracture prediction and early warning: Insight from fusion of multi-physics field information

Response Characteristics of Electric Potential and Its Relationship with Dynamic Disaster during Mining Activities: A Case Study in Xuehu Coal Mine, China

Response characteristics of acoustic emission signal and judgment criteria for different fracture modes