Abstract:Polypropylene fiber was equally mixed into alkali-activated slag fly ash geopolymer in order to ensure the filling effect of mine goaf and improve the stability of cemented gangue paste filling material with ecological matrix. Triaxial compression tests were then conducted under various conditions. The mechanical properties and damage characteristics of composite paste filling materials are studied, and the damage evolution model of paste filling materials under triaxial compression is established, based on the deviatoric stress-strain curve generated by the progressive failure behavior of samples. Internal physical and chemical mechanisms of the evolution of structure and characteristics are elucidated and comprehended via the use of SEM-EDS and XRD micro-techniques. The results show that the fiber can effectively improve the ultimate strength and the corresponding effective stress strength index of the sample within the scope of the experimental study. The best strengthening effect is achieved when the amount of NaOH is 3% of the mass of the solid material, the amount of fiber is 5‰ of the mass of the solid material, and the length of the fiber is about 12 mm. The action mode of the fiber in the sample is mainly divided into single-grip anchoring and three-dimensional mesh traction. As the crack initiates and develops, connection occurs in the matrix, where the fiber has an obvious interference and retardation effect on the crack propagation, thereby transforming the brittle failure into a ductile failure and consequently improving the fracture properties of the ecological cementitious coal gangue matrix. The theoretical damage evolution model of a segmented filling body is constructed by taking the initial compaction stage end point as the critical point, and the curve of the damage evolution model of the specimen under different conditions is obtained. The theoretical model is verified by the results from the triaxial compression test. We concluded that the experimental curve is in good agreement with the theoretical curve. Therefore, the established theoretical model has a certain reference value for the analysis and evaluation of the mechanical properties of paste filling materials. The research results can improve the utilization rate of solid waste resources.

Experimental Study on Physical and Mechanical Properties of Mixed Filling behind Retaining Wall

Effect of Fines Loss on the Microstructure and Shear Behaviors of Gap-Graded Soils: A Multiscale Perspective

Experimental Study on Shear Strength Considering Initial Void Ratio and Plasticity Index

Water Retention Behavior and Shear Strength of Artificially Cemented Granite Residual Soil Subjected to Free Drying

Micromechanical Investigation of Suffusion and Its Consequence in Gap-Graded Granular Soil at the Opening of Underground Structures Using the Coupled CFD-DEM Method

Model Experiment on Mechanical Property of Reinforced-earth Retaining Wall

Large Scale Triaxial Testing Of Douposi Moderately-To-Slightly Weathered Fill Materials

Analysis on Mechanical Property of Retaining Wall in Tailing Filling Test Area of Xianglushan Tungsten Mine

Filling wall mechanical analysis of gob-side entry retaining with composite roof

Particle Flow Simulations of the Compaction of Filling Materials in Highly Filled Foundation with Analyses of the Transverse Isotropy

Study on compaction characteristics and mechanical model of dry crushing filling material under lateral confinement condition

Research on the Mechanical Properties of Flexible Material Backfilling Wall in Gob-Side Entry Retaining

Triaxial Shear Tests on Soil-Rock Mixture and 3D Multi-Shear Bounding Surface Model

Study on mechanical properties and damage characteristics of cemented waste rock-tailing backfill

Study on triaxial compression performance and damage characteristics of fiber-reinforced ecological matrix cementing gangue gypsum fill material

Effect of Initial Density, Particle Shape, and Confining Stress on the Critical State Behavior of Weathered Gap-Graded Granular Soils

Experimental study on mechanical strength and acoustic emission characteristics of waste rock cemented backfill

In-situ direct shear test and numerical comparative research on mudstone gravel slope reinforced by polymer grouting

Effects of Moisture and Stone Content on the Shear Strength Characteristics of Soil-Rock Mixture

Study of mechanical properties of soil-cement mixture for a cutoff wall

Mechanical Properties and Deterioration Instability of Filling Body with Gangue-Cement Material Based on AE Experiment