Abstract:<span>The building airtightness is essential to achieve a high energy performance. In most countries however, it is not mandatory to measure the airtightness. In the Netherlands it is common practice to just take several samples in a housing project. These samples do not give a good indication for all the buildings in a project. It is therefore important to measure the airtightness of all the buildings. Current methods for airtightness measuring are too expensive and time consuming to make this feasible. A method with a new device, the AirTightnessTester (ATT), is proposed. By using the buildings ventilation system, a reduction in price and time can be achieved. The ATT measures in compliance with RESNET-380-2016. The ATT makes use of the ventilation system of the building. It will be explained when and how the ATT makes use of a ventilation system. We have looked at the different ventilation systems that are commonly used in new housing projects in somewhat more detail to analyse the feasibility of our method in practice. It is concluded that several systems can be used as they are now. Some ventilation systems cannot be turned on and off easily. For these ventilation systems a setting switching method has been developed. The theory behind this method, and some preliminary results using this method will be presented. To validate measurements with the ATT, comparisons have been done to the blower door. Preliminary results were already presented during the 2018 AIVC conference but further validation was still necessary. The measurements with the blower door are multi-point measurements and are all done in compliance with ISO9972. The measurements done with the ATT are all single-point measurements. The comparisons are made with the blower door, because since it is the most used method for airtightness measuring. To get a fair comparison, the uncertainty of both methods is taken into account. Overall the blower door and the ATT give show similar results for the airtigthness. In 23 of the 37 measurements it was found that the measured air leakage with the ATT was slightly higher than the measurement compared to the result with the blower door. When switching between a low and a high flow, it was found that 10 out of 12 measurements with the ATT were higher.</span>

A practical review of alternatives to the steady pressurisation method for determining building airtightness

Experimental Studies of a Pulse Pressurisation Technique for Measuring Building Airtightness

Applicability of a simple and new airtightness measuring method and further comparisons with blower door measurements

Airtightness measurement of an outdoor chamber using the Pulse and blower door methods under various wind and leakage scenarios

Performance and Measurement Devices for Membrane Buildings in Civil Engineering: A Review

A nozzle pulse pressurisation technique for measurement of building leakage at low pressure

Reassessing ISO 9972 constraints: A mathematical analysis of errors in building airtightness tests due to steady wind and stack effect

Development and experimental evaluation of new building air leakage measurement methods: measurement of interior air leaks and comparison to conventional methods

Residential buildings airtightness frameworks: A review on the main databases and setups in Europe and North America

Airtightness Analysis of the Built Heritage–Field Measurements of Nineteenth Century Buildings through Blower Door Tests

Methods for Evaluating and Improving Thermal Performance of Wall-to-floor Thermal Bridges

Experimental Assessment of Different Sealing Methods for Windows to Improve Building Airtightness in UAE Residential Buildings

Airtightness and Heat Energy Loss of Mid-Size Terraced Houses Built of Different Construction Materials

A rapid review of the impact of increasing airtightness on indoor air quality

Experimental exploration on airtightness performance of residential buildings in the hot summer and cold winter zone in China

Exploring the Role of Airtightness for Achieving Carbon Neutrality in Canadian Residential Buildings: A Streamlined Life Cycle Assessment

Airtightness evaluation of Canadian dwellings and influencing factors based on measured data and predictive models

Assessing the impact of pressure drop and leak distribution on ductwork airtightness measurements

The Impacts of Air Leakage Paths and Airtightness Levels on Air Change Rates

Improvement of Airtightness for Lightweight Prefabricated Building Envelope Through Optimized Design of Panel Joints

In situ methodology for thermal performance evaluation of building wall: A review