Abstract:Polylactic acid (PLA) has been widely used as filaments for material extrusion additive manufacturing (AM) to develop patient-specific scaffolds in bone tissue engineering. Hydroxyapatite (HA), a major component of natural bone, has been extensively recognized as an osteoconductive biomolecule. Here, inspired by the mussel-adhesive phenomenon, in this study, polydopamine (PDA) coating was applied to the surface of 3D printed PLA scaffolds (PLA@PDA), acting as a versatile adhesive platform for immobilizing HA nanoparticles (nHA). Comprehensive analyses were performed to understand the physicochemical properties of the 3D-printed PLA scaffold functionalized with nHA and PDA for their potent clinical application as a bone regenerative substitute. Scanning electron microscopy (SEM) and element dispersive X-ray (EDX) confirmed a successful loading of nHA particles on the surface of PLA@PDA after 3 and 7 days of coating (PLA@PDA-HA3 and PLA@PDA-HA7), while the surface micromorphology and porosity remain unchanged after surface modification. The thermogravimetric analysis (TGA) showed that 7.7 % and 12.3% mass ratio of nHA were loaded on the PLA scaffold surface, respectively. The wettability test indicated that the hydrophilicity of nHA-coated scaffolds was greatly enhanced, while the mechanical properties remained uncompromised. The 3D laser scanning confocal microscope (3DLS) images revealed that the surface roughness was significantly increased, reaching Sa (arithmetic mean height) of 0.402 μm in PLA@PDA-HA7. Twenty-eight days of in-vitro degradation results showed that the introduction of nHA to the PLA surface enhances its degradation properties, as evidenced by the SEM images and weight loss test. Furthermore, a sustainable release of Ca 2+ from PLA@PDA-HA3 and PLA@PDA-HA7 was recorded, during the degradation process. In contrast, the released hydroxyl group of nHA tends to neutralize the local acidic environments, which was more conducive to osteoblastic differentiation and extracellular mineralization. Taken together, this facile surface modification provides 3D printed PLA scaffolds with effective bone regenerative properties by depositing Ca 2+ contents, improving surface hydrophilicity, and enhancing the in-vitro degradation rate.

Doping and Incorporation of Hydroxyapatite in Development of PU-PLA Electrospun Osteogenic Membranes

Biological Efficacy of Modified Structure of Polymer Surfaces for Bone Substitute

Development of Porous Polyurethane/Strontium-Substituted Hydroxyapatite Composites for Bone Regeneration

Promotion of In Vitro Osteogenic Activity by Melt Extrusion-Based PLLA/PCL/PHBV Scaffolds Enriched with Nano-Hydroxyapatite and Strontium Substituted Nano-Hydroxyapatite

Incorporation of well-dispersed calcium phosphate nanoparticles into PLGA electrospun nanofibers to enhance the osteogenic induction potential

Biomineralization Guided by Polydopamine-Modifed Poly(l-Lactide) Fibrous Membrane for Promoted Osteoconductive Activity.

Synthesis and Biocompatibility Evaluation of PCL Electrospun Membranes Coated with MTA/HA for Potential Application in Dental Pulp Capping

Physio-Chemical and Biological Characterization of Novel HPC (Hydroxypropylcellulose):HAP (Hydroxyapatite):PLA (Poly Lactic Acid) Electrospun Nanofibers as Implantable Material for Bone Regenerative Application

Poly-L-lactic acid/hydroxyapatite hybrid membrane for bone tissue regeneration.

Preparation, in Vitro Degradability, Cytotoxicity, and in Vivo Biocompatibility of Porous Hydroxyapatite Whisker-Reinforced Poly(l-Lactide) Biocomposite Scaffolds.

Polydopamine-Templated Hydroxyapatite Reinforced Polycaprolactone Composite Nanofibers with Enhanced Cytocompatibility and Osteogenesis for Bone Tissue Engineering

Organic/Inorganic Composite Membranes Based on Poly(L-Lactic-Co-Glycolic Acid) and Mesoporous Silica for Effective Bone Tissue Engineering

Biological Evaluation of Porous Aliphatic Polyurethane/hydroxyapatite Composite Scaffolds for Bone Tissue Engineering.

Biomimetic, mussel-inspired surface modification of 3D-printed biodegradable polylactic acid scaffolds with nano-hydroxyapatite for bone tissue engineering

Introduction of an Interface Layer on Hydroxyapatite Whisker/poly(l-Lactide) Composite and Its Contribution for Improved Bioactivity and Mechanical Properties

Strontium-incorporated Mineralized PLLA Nanofibrous Membranes for Promoting Bone Defect Repair

Preparation of Icariin and Deferoxamine Functionalized Poly(L-lactide)/chitosan Micro/Nanofibrous Membranes with Synergistic Enhanced Osteogenesis and Angiogenesis

PLLA Membranes Enriched with Chitosan/DCPA: Innovative Approach to Bone Tissue Engineering

Physicochemical and Biological Properties of Nano-Hydroxyapatite-Reinforced Aliphatic Polyurethanes Membranes

Nucleation of Bioactive Hydroxyapatite on Polydopamine Coating Three-Dimensional Printed Poly (Lactic Acid) Macro-Porous Scaffold for Bone Grafting Application

Preparation and Characterization of Nano-Hydroxyapatite/Polyurethane Composite Bio-film