Abstract:The unique properties of zeolites, such as their microporous structure and ion exchange capacity, make them a promising material for water treatment applications. This work explores the synthesis of zeolites from coal fly ash (CFA) using the microwave fusion and hydrothermal synthesis method and investigates their effectiveness in removing heavy metal ions, specifically Cu2+, Zn2+, Ni2+, and Pb2+, from an aqueous solution. Moreover, to overcome the challenge of extracting fine zeolite particles from treated water, a novel method using colloidal PVA solutions to bind magnetite nanoparticles to zeolite was used. The obtained magnetic CFA zeolite was investigated for its adsorption performance and ability to be extracted from water. The experiments included the analysis of adsorption kinetics and the determination of both zeolites adsorption capacity in single and mixed ion systems. The results obtained in this study show that the zeolite synthesized from CFA has excellent adsorption properties for the investigated metal ions. Specifically, in a single ion system, the maximum adsorption capacity of CFA-zeolite was calculated as 495 mg/g for Pb2+, 248 mg/g for Cu2+, 177 mg/g for Zn2+, and 130 mg/g for Ni2+. When tested with the same dosage of zeolite in the mixed ions system, the adsorption capacity was found to be 276 mg/g for Pb2+ and 95 mg/g for Cu2+, while Zn2+ and Ni2+ ions were not adsorbed. Furthermore, the results suggest that the magnetic zeolite composite has excellent adsorption properties. Thus, in mixed ions system its maximum adsorption capacity was found as 261 mg/g, 109 mg/g, 45 mg/g and 42 mg/g for Pb2+, Cu2+, Zn2+ and Ni2+ ions, respectively; the selectivity order of Pb2+ > Cu2+ > Zn2+ > Ni2+ was therefore established for both systems. Additionally, magnetic zeolite was shown to be easily separated from the treated solution using high intensity magnetic separation. Various surface characterization techniques were utilized to examine the zeolite's surface before and after the adsorption of metal ions, and the results suggest an ion exchange mechanism for the studied metals. Overall, this study further highlights the potential of CFA-synthesized zeolites for the removal of heavy metal pollutants from wastewater and provides insights into the mechanisms underlying their adsorption behavior. Moreover, it was demonstrated that the synthesized magnetic CFA zeolite has potential for practical water treatment applications as an effective and sustainable material for the removal of heavy metal pollutants from wastewater. Further investigations are necessary to optimize the use of CFA magnetic zeolites for practical water treatment applications.

Lead and Phosphorus Removal Properties of Zeolite-Hydrotalcite Composites

Preparation and Phosphorus Removal Performance of Zr–La–Fe Ternary Composite Adsorbent Embedded with Sodium Alginate

Composite modification of the zeolite and the effects on the simultaneous removal of nitrogen and phosphorus

Study on synergistic effect of removal of nitrogen and phosphorus by mixed modified zeolite

Synergetic effect between zeolite 5 A and maghemite nanoparticles for fast lead uptake from the Peruvian river Cumbaza: Study of surface adsorption mechanism using X-ray photoelectron spectroscopy

Facile fabrication of novel analcime/sodium aluminum silicate hydrate and zeolite Y/faujasite mesoporous nanocomposites for efficient removal of Cu(II) and Pb(II) ions from aqueous media

Impregnating Zirconium Phosphate onto Porous Polymers for Lead Removal from Waters: Effect of Nanosized Particles and Polymer Chemistry

Hydrothermal synthesis of hydroxy sodalite from fly ash for the removal of lead ions from water

Synthesis of zeolite/activated carbon composite material for the removal of lead (II) and cadmium (II) ions

Removal of Nitrogen and Phosphorus from Eutrophic Waters by Complex Preparation

Performance and mechanism of phosphorus adsorption removal from wastewater by a Ce-Zr-Al composite adsorbent

Utilizing Faujasite-type zeolites prepared from waste aluminium foil for competitive ion-exchange to remove heavy metals from simulated wastewater

Zinc oxide – mesoporous silica nanocomposite: preparation, characterisation and application in water treatment for lead, cadmium and chromium removal

Zeolite A powder and beads from sugarcane bagasse fly ash modified with iron(III) oxide-hydroxide for lead adsorption

Effect of synthesis parameters on the formation 4A zeolite crystals: characterization analysis and heavy metals uptake performance study for water treatment

In situ growth ZIF-8 on porous chitosan/hydroxyapatite composite fibers for ultra-efficiently eliminating lead ions in wastewater

Zeolite synthesis from coal fly ash and its application to heavy metals remediation from water contaminated with Pb, Cu, Zn and Ni ions

Preparation of melamine formaldehyde/nanozeolite Y composite based on nanosilica extracted from rice husks by sol–gel method: adsorption of lead (II) ion

Porous Adsorbent Based on Kaolin and Nanomagnetic Cobalt Ferrite for Effective Removal of Pb(II) from Wastewater

Decontamination of multiple pollutants from eutrophic river water using iron-modification carbon/zeolite

Preferable Adsorption of Nitrogen and Phosphorus from Agricultural Wastewater Using Thermally Modified Zeolite–Diatomite Composite Adsorbent