Abstract:Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Ahead of Print. Vehicle weight has been a critical concern in the aerospace and automobile industries for decades. Integrating dissimilar aluminium and polymer hybrid structures is beneficial for weight reduction without affecting structural performance. In the present work, aluminium alloy 7475 and polyphenylene sulfide (PPS) sheets were joined using the friction stir welding (FSW) technology in lap joint configuration. A series of FSW experiments have been performed by the design matrix developed using response surface methodology. Tensile lap shear strength (TLS) is calculated for each experimental run. In this study, an attempt has been made to assess the potential of machine learning algorithms to predict the TLS of the joint. It was found that the support vector machine (SVM) model with RBF kernel was the most effective for predicting the TLS. Furthermore, FSW process parameters are optimized by means of the desirability approach. The optimal set to attain maximum TLS is identified as the tilt angle of 2°, welding speed of 5.12 mm/min and tool rotational speed of 1185.92 r/min. Finally, a confirmation test was performed to validate the optimal set and the adequacy of the developed SVM model. From the confirmation test, the error percentage between experimental and prediction values is less than 5%. Metallographic analysis revealed that the joining mechanism is the macro and micromechanical interlocking assisted by chemical bonding.

Low-speed friction riveting: a new method for joining polymer/metal hybrid structures for aerospace applications

Review of Research on Friction Riveting of Polymer/Metal Light Weight Multi-material Structures

Self-Pierce Riveting: Development and Assessment for Joining Polymer—Metal Hybrid Structures in Lightweight Automotive Applications

A decision tree approach for energy efficient friction riveting of polymer/metal multi-material lightweight structures

Friction forge riveting of AA7075-T6 sheets with large diameter 2117-T3 rivets

Friction Self-Piercing Riveting (F-Spr) of Aa6061-T6 to Az31b

Enhancement of joint strength of dissimilar aluminum/polymer hybrid joints by friction stir spot welding by surface textures

Friction Self-Piercing Riveting of Aluminum Alloy Aa6061-T6 to Magnesium Alloy Az31b

Friction rivet joining towards high-performance wood -metal hybrid structures

Effect of Process Parameters on Joint Formation and Mechanical Performance in Friction Stir Blind Riveting of Aluminum Alloys

Friction-based welding of metal to polymer

High-speed joining of hybrid metal-polymer joints during the friction-assisted joining process

Application of machine learning approaches to predict joint strength of friction stir welded aluminium alloy 7475 and PPS polymer hybrid joint

Experimental investigation and optimization of mechanical properties on combination of higher and lower strength of aluminum alloys

Effects of process parameters on friction self-piercing riveting of dissimilar materials

Assessment of dissimilar joining between metal and polymer hybrid structure with different joining processes

Friction Self-Piercing Riveting (F-Spr) Of Dissimilar Materials

Development and mechanical evaluation of induction low Shear Friction Stir Spot rivets (ILSFSR) as crack arrest features in co-consolidated and welded thermoplastic laminates

Atomically locked interfaces of metal (Aluminum) and polymer (Polypropylene) using mechanical friction

Joint Formation and Mechanical Performance of Friction Self-Piercing Riveted Aluminum Alloy AA7075-T6 Joints