Abstract:Focused ion beam-scanning electron microscope (FIB-SEM) tomography is a powerful application in obtaining three-dimensional (3D) information. The FIB creates a cross section and subsequently removes thin slices. The SEM takes images using secondary or backscattered electrons, or maps every slice using X-rays and/or electron backscatter diffraction patterns. The objective of this study is to assess the possibilities of combining FIB-SEM tomography with cathodoluminescence (CL) imaging. The intensity of CL emission is related to variations in defect or impurity concentrations. A potential problem with FIB-SEM CL tomography is that ion milling may change the defect state of the material and the CL emission. In addition the conventional tilted sample geometry used in FIB-SEM tomography is not compatible with conventional CL detectors. Here we examine the influence of the FIB on CL emission in natural diamond and the feasibility of FIB-SEM CL tomography. A systematic investigation establishes that the ion beam influences CL emission of diamond, with a dependency on both the ion beam and electron beam acceleration voltage. CL emission in natural diamond is enhanced particularly at low ion beam and electron beam voltages. This enhancement of the CL emission can be partly explained by an increase in surface defects induced by ion milling. CL emission enhancement could be used to improve the CL image quality. To conduct FIB-SEM CL tomography, a recently developed novel specimen geometry is adopted to enable sequential ion milling and CL imaging on an untilted sample. We show that CL imaging can be manually combined with FIB-SEM tomography with a modified protocol for 3D microstructure reconstruction. In principle, automated FIB-SEM CL tomography should be feasible, provided that dedicated CL detectors are developed that allow subsequent milling and CL imaging without manual intervention, as the current CL detector needs to be manually retracted before a slice can be milled. Due to the required high electron beam acceleration voltage for CL emission, the resolution for FIB-SEM CL tomography is currently limited to several hundreds of nm in XY and up to 650 nm in Z for diamonds. Opaque materials are likely to have an improved Z resolution, as CL emission generated deeper in the material is not able to escape from it.

Fiber-optic Based Spectral Cathodoluminescence: Simple and Economic Option for Use in Conventional and Environmental Scanning Electron Microscopy

An efficient spectroscopic detection system for cathodoluminescence mode scanning electron microscopy (SEM)

Application of Spectral Cathodoluminescence to Multi-Modal Research at the Nano-Scale: Case Studies from the UNSW Electron Microscope Unit

Application of cathodoluminescence to zircon in FEG-ESEM

Cathodoluminescence Imaging of Organic Fluorophores and Fluorescently Labeled Cells

Low-energy Cathodoluminescence Microscopy for the Characterization of Nanostructures

Application of SEM-CL system in the characterization of material microstructures

Scanning Cathodoluminescence Microscopy: Applications in Semiconductor and Metallic Nanostructures

An $\textit{In Situ}$ Light Illumination System for an Aberration-Corrected Environmental Transmission Electron Microscope

Lanthanide Cathodophores for Multicolor Electron Microscopy

Cathodoluminescence Characterization of Point Defects in Optical Fibers

Hyperspectral mapping-combining cathodoluminescence and X-ray collection in an electron microprobe

Simultaneous mapping of cathodoluminescence spectra and backscatter diffraction patterns in a scanning electron microscope

A simple and cost-effective strategy for electrochemiluminescence spectral determination

Cathodo-luminescence of color centers induced in sapphire and yttria-stabilized zirconia by high-energy electrons

Fundamentals of cathodoluminescence in a STEM: The impact of sample geometry and electron beam energy on light emission of semiconductors

An atlas of photonic and plasmonic materials for cathodoluminescence microscopy

Cathodoluminescent and Characteristic X-ray-emissive Rare-Earth-doped Core/Shell Immunolabels for Spectromicroscopic Analysis of Cell Surface Receptors

FIB-SEM cathodoluminescence tomography: practical and theoretical considerations

Integrated Fiber-Based Optoelectrode for Electrochemiluminescence Sensing

Cathodoluminescence Nanoscopy: State of the Art and Beyond