Abstract:Cotton harvesting is performed by using expensive combine harvesters which makes it difficult for small to medium-size cotton farmers to grow cotton economically. Advances in robotics have provided an opportunity to harvest cotton using small and robust autonomous rovers that can be deployed in the field as a “swarm” of harvesters, with each harvester responsible for a small hectarage. However, rovers need high-performance navigation to obtain the necessary precision for harvesting. Current precision harvesting systems depend heavily on Real-Time Kinematic Global Navigation Satellite System (RTK-GNSS) to navigate rows of crops. However, GNSS cannot be the only method used to navigate the farm because for robots to work as a coordinated multiagent unit on the same farm because they also require visual systems to navigate, avoid collisions, and to accommodate plant growth and canopy changes. Hence, the optical system remains to be a complementary method for increasing the efficiency of the GNSS. In this study, visual detection of cotton rows and bolls was developed, demonstrated, and evaluated. A pixel-based algorithm was used to calculate and determine the upper and lower part of the canopy of the cotton rows by assuming the normal distribution of the high and low depth pixels. The left and right rows were detected by using perspective transformation and pixel-based sliding window algorithms. Then, the system determined the Bayesian score of the detection and calculated the center of the rows for the smooth navigation of the rover. This visual system achieved an accuracy of 92.3% and an F1 score of 0.951 for the detection of cotton rows. Furthermore, the same stereo vision system was used to detect the location of the cotton bolls. A comparison of the cotton bolls’ distances above the ground to the manual measurements showed that the system achieved an average R2 value of 99% with a root mean square error (RMSE) of 9 mm when stationary and 95% with an RMSE of 34 mm when moving at approximately 0.64 km/h. The rover might have needed to stop several times to improve its detection accuracy or move more slowly. Therefore, the accuracy obtained in row detection and boll location estimation is favorable for use in a cotton harvesting robotic system. Future research should involve testing of the models in a large farm with undefoliated plants.

Center-Articulated Hydrostatic Cotton Harvesting Rover Using Visual-Servoing Control and a Finite State Machine

Evaluation of a Stereo Vision System for Cotton Row Detection and Boll Location Estimation in Direct Sunlight

An end-effector for robotic cotton harvesting

Autonomous diode laser weeding mobile robot in cotton field using deep learning, visual servoing and finite state machine

The Control and Co-simulation of Picking Robot Arm

Hybrid Visual Servo Control of a Robotic Manipulator for Cherry Tomato Harvesting

System Design and Control of an Apple Harvesting Robot

Research Progress of Urban Dual-arm Humanoid Grape Harvesting Robot

A strawberry harvest-aiding system with crop-transport co-robots: Design, development, and field evaluation

Development and Evaluation of a Watermelon-Harvesting Robot Prototype: Vision System and End-Effector

Design, Integration, and Field Evaluation of a Selective Harvesting Robot for Broccoli

A Modular Robot System for Agricultural Applications

Predictive Scheduling of Collaborative Mobile Robots for Improved Crop-transport Logistics of Manually Harvested Crops

Dual-arm Robot Design and Testing for Harvesting Tomato in Greenhouse

Hierarchical Tri-manual Planning for Vision-assisted Fruit Harvesting with Quadrupedal Robots

Development and Experiment of an Innovative Row-Controlled Device for Residual Film Collector to Drive Autonomously along the Ridge

Vision-assisted Avocado Harvesting with Aerial Bimanual Manipulation

An Extensive Review of Mobile Agricultural Robotics for Field Operations: Focus on Cotton Harvesting

Autonomous Robotic Pepper Harvesting: Imitation Learning in Unstructured Agricultural Environments

Gesture-Controlled Robotic Arm for Agricultural Harvesting Using a Data Glove with Bending Sensor and OptiTrack Systems