Abstract:As the size of wind turbines (WTs) increase, an additional increase in the structural load on the WT components is to be expected. This will have an impact on operational safety in terms of damage and service life. Spatial and temporal fluctuations in wind speed are responsible for the fatigue load during power generation. To minimize the effects of varying stresses, advanced control systems that incorporate appropriate models of the disturbances are proposed. These controllers are usually developed based on reduced-order models of nonlinear WTs, hence are affected by uncertainties such as modeling errors. Although robust controllers are able to deal with uncertainties, they are still only developed for design situations. Therefore, their performance can deteriorate significantly under very uncertain operating conditions. On the other hand, adaptive controllers are designed to consider multiple operating points in the design. However, most of these methods do not consider the optimization of different objectives in the design for structural load reduction or speed control of WTs. In this paper, a novel adaptive robust observer-based control strategy for structural load reduction and rotor speed regulation in commercial WTs operating at high wind speed regime is proposed. To achieve this, a robust disturbance accommodating controller (RDAC) is combined with an adaptive pitch controller (aIPC), which adapts to changing operating points. The proposed control method is tested on a 1.5 MW reference WT (RWT) developed by the National Renewable Energy Laboratory (NREL). The simulation results show that, compared with the state of the art presented on a gain-scheduled proportional integral (GSPI) and RDAC controllers, the proposed control method reduces the structural load on the rotor blades by 10.7 % and 9.2 %, respectively, and on the tower by 36.2 % and 8.4 %, respectively. Therefore, it makes a key contribution to mitigating the structural dynamic loads on WTs by reducing the load on multiple components. This is achieved without any significant impact on the rotor speed and power regulation performance or the generated power under changing operating conditions.

LIDAR-Assisted Wind Turbine Structural Load Reduction by Linear Single Model Predictive Control

Wind Turbine Structural Load Reduction by Linear Single Model Predictive Control

Design and Assessment of a LIDAR-Based Model Predictive Wind Turbine Control

Incremental Feedforward Collective Pitch Control Method for Wind Turbines

Load Control of Wind Turbine Based on Model-free Adaptive Controller

Adaptive Dual-layer Sliding Mode Control for Wind Turbines with Estimated Wind Speed

Nonlinear modelling and adaptive control of smart rotor wind turbines

On LiDAR-assisted wind turbine retrofit control and fatigue load reductions

LSTM-NN Yaw Control of Wind Turbines Based on Upstream Wind Information

Adaptive Continuous Neural Pitch Angle Control for Variable‐Speed Wind Turbines

Non-Linear Pitch Control of Wind Turbines for Tower Load Reduction

Loading System and Control Strategy for Simulating Wind Turbine Loads

Combining LIDAR and LADRC for Intelligent Pitch Control of Wind Turbines

Adaptive Robust Observer-Based Control for Structural Load Mitigation and Speed Regulation in Commercial Wind Turbines

LIDAR-Assisted Exact Output Regulation for Load Mitigation in Wind Turbines

Effective Wind Speed Estimation and Prediction Based Feedforward Feedback Pitch Control for Wind Turbines.

Model predictive control of wind turbine with aero-elastically tailored blades

Auto Disturbance Rejection Control Strategy of Wind Turbine Permanent Magnet Direct Drive Individual Variable Pitch System Under Load Excitation

Passive structural control of offshore wind turbines

Control-oriented wind turbine load estimation based on local linear neuro-fuzzy models

Load Mitigation for a Floating Wind Turbine Via Generalized Structural Control