Abstract:We report the results of a detailed numerical analysis of a real resonant spherical gravitational wave antenna operating with six resonant two-mode capacitive transducers read out by superconducting quantum interference devices (SQUID) amplifiers. We derive a set of equations to describe the electro-mechanical dynamics of the detector. The model takes into account the effect of all the noise sources present in each transducer chain: the thermal noise associated with the mechanical resonators, the thermal noise from the superconducting impedance matching transformer, the back-action noise and the additive current noise of the SQUID amplifier. Asymmetries in the detector signal-to-noise ratio and bandwidth, coming from considering the transducers not as point-like objects but as sensor with physically defined geometry and dimension, are also investigated. We calculate the sensitivity for an ultracryogenic, 30 ton, 2 meter in diameter, spherical detector with optimal and non-optimal impedance matching of the electrical read-out scheme to the mechanical modes. The results of the analysis is useful not only to optimize existing smaller mass spherical detector like MiniGrail, in Leiden, but also as a technological guideline for future massive detectors. Furthermore we calculate the antenna patterns when the sphere operates with one, three and six resonators. The sky coverage for two detectors based in The Netherlands and Brasil and operating in coincidence is also estimated. Finally, we describe and numerically verify a calibration and filtering procedure useful for diagnostic and detection purposes in analogy with existing resonant bar detectors.

On the Dilution Refrigerator Thermal Connection for the SCHENBERG Gravitational Wave Detector

Development of superconducting Klystron cavity for the Mario Schenberg gravitational wave detector

The Design Strain Sensitivity of the Schenberg Spherical Resonant Antenna for Gravitational Waves

A Tiltable Single-Shot Miniature Dilution Refrigerator for Astrophysical Applications

Sensitivity Characterisation of a Parametric Transducer for Gravitational Wave Detection Through Optical Spring Effect

Dry Dilution Refrigerator for Experiments on Quantum Effects in the Microwave Regime

Characterization of Two Fast-Turnaround Dry Dilution Refrigerators for Scanning Probe Microscopy

Complete model of a spherical gravitational wave detector with capacitive transducers. Calibration and sensitivity optimization

Insertable system for fast turnaround time microwave experiments in a dilution refrigerator

Vibration decoupling system for massive bolometers in dry cryostats

Vibrations on pulse tube based Dry Dilution Refrigerators for low noise measurements

Low-vibration cryogenic test facility for next generation of ground-based gravitational-wave observatories

A Vibration Decoupling System for TES Operation in the COSINUS Dry Dilution Refrigerator

A Closed-Cycle Miniature Dilution Refrigerator for a Fast-Cooldown 100 mK Detector Wafer Test Cryostat

Cryogenic broadband vibration measurement on a cryogen-free dilution refrigerator

Tilt interferometer for detecting gravitational wave signals at high frequencies

Astrophysics from data analysis of spherical gravitational wave detectors

Thermal induced noise on test mass with copper alloy electrode housing for spaceborne gravitational wave detection

Measurement of the thermal accommodation coefficient of helium on a crystalline silicon surface at low-temperatures

A cryogenic silicon interferometer for gravitational-wave detection