Abstract:The replacement of fossil-based plastics with biobased and biodegradable alternatives has become an important research challenge in recent years, aiming to eliminate the negative environmental impact of persistent plastics in nature. In this report, design of experiments was successfully exploited to develop an efficient and sustainable method for extracting intracellular PHA from Photobacterium ganghwense C2.2 using dihydrolevoglucosenone (Cyrene) and ethanol as biobased solvents obtainable from sustainable sources. The extraction conditions were studied and optimized against the yield and molecular weight. The temperature range for the extraction was scouted by using differential scanning calorimetry, while size exclusion chromatography coupled to refractive index and multiangle light scattering detectors was used to assess the molecular weights of the extracted polymers. The examined ranges in the model were, respectively, 1.6–8.4% (w/v) of lyophilized cells content per 10 mL of solvent, 3–17 min extraction time, and temperatures from 116 to 144 °C. Time and temperature strongly affected the extraction yields and molecular weights of the obtained polymers while the concentration of bacterial biomass only effected the molecular weight. Several quadratic and interaction coefficients were significant in the well-fit partial least-squares regression models (R 2 > 0.8, Q 2 > 0.6) indicating that nonlinear effects and interacting parameter contributed to the optimization targets. The optimized extraction should be performed at 130 °C for 15 min with 2% loading of bacterial biomass. The predicted yield and molecular weight of the polymer matched the values obtained from the real experiment under the optimized conditions. The method setup provided similar yield and higher molecular weight in much shorter time compared to overnight Soxhlet extraction with CHCl3. The clean 1H nuclear magnetic resonance spectra of polymers extracted from bacteria indicate that high purity materials can be obtained using an optimized extraction scheme. Additionally, the Cyrene solvent could be recycled at least five times and still performed the extraction equally well as the fresh solvent. Finally, the current method demonstrated a high potential for scalability using a HP4750 stirred filtration cell. Three different filtration conditions were tested, achieving up to 97.4% recovery at 80 °C using a 0.3 μm glass fiber membrane, with a flux of 312.5 LMH.

Recovery of the PHA Copolymer P(HB-co-HHx) With Non-halogenated Solvents: Influences on Molecular Weight and HHx-Content

Biomass Extraction Using Non-Chlorinated Solvents for Biocompatibility Improvement of Polyhydroxyalkanoates

Microbially synthesized poly(hydroxybutyrate-co-hydroxyhexanoate) with low to moderate hydroxyhexanoate content: Properties and applications

Extraction of polyhydroxyalkanoate from activated sludge using supercritical carbon dioxide process and biopolymer characterization

A novel strategy for extraction of intracellular poly(3-hydroxybutyrate) from engineered Pseudomonas putida using deep eutectic solvents: Comparison with traditional biobased organic solvents

Scalable and Sustainable Processing of Intracellular Polyhydroxyalkanoates with Biobased Solvents

Recovery of polyhydroxyalkanoates (PHAs) polymers from a mixed microbial culture through combined ultrasonic disruption and alkaline digestion

Established and advanced approaches for recovery of microbial polyhydroxyalkanoate (PHA) biopolyesters from surrounding microbial biomass

Biodegradation studies of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate)

Current trends in medium‐chain‐length polyhydroxyalkanoates: Microbial production, purification, and characterization

Engineering Pseudomonas Chlororaphis HT66 for the Biosynthesis of Copolymers Containing 3-Hydroxybutyrate and Medium-Chain-Length 3-Hydroxyalkanoates

Polyhydroxyalkanoate Copolyesters Produced by Ralstonia Eutropha PHB−4 Harboring a Low-Substrate-specificity PHA Synthase PhaC2Ps from Pseudomonas Stutzeri 1317

Study of Enzymatic Degradation of Microbial Copolyesters Consisting of 3-Hydroxybutyrate and Medium-Chain-length 3-Hydroxyalkanoates

Chain-End Controlled Depolymerization Selectivity in α,α-Disubstituted Propionate PHAs with Dual Closed-Loop Recycling and Record-High Melting Temperature

Chemically circular, mechanically tough, and melt-processable polyhydroxyalkanoates

Biodegradable polyhydroxyalkanoates production from wheat straw by recombinant Halomonas elongata A1

Utilization of palm oil and palm oil effluent as a carbon source for the production of polyhydroxybutyrate co‐polyhydroxyhexanoate P(HB‐co‐HHx) a biopolymer in bacillus sp

Production and Properties of Microbial Polyhydroxyalkanoates Synthesized from Hydrolysates of Jerusalem Artichoke Tubers and Vegetative Biomass

Improvement of the Polyhydroxyalkanoates Recovery from Mixed Microbial Cultures Using Sodium Hypochlorite Pre-Treatment Coupled with Solvent Extraction

Synthesis of intracellular polyhydroxyalkanoates (PHA) from mixed phenolic substrates in an acclimated consortium and the mechanisms of toxicity

Recovery and characterization of polyhydroxybutyrate from Chlorogloea fritschii TISTR 8527 using halogenated and green solvents