Abstract:Due to climatic factors and rapid urbanization, the soil in the Loess Plateau, China, experiences the coupled effects of dry-wet cycles and chemical contamination. Understanding the mechanical behavior and corresponding microstructural evolution of contaminated loess subjected to dry-wet cycles is essential to elucidate the soil degradation mechanism. Therefore, direct shear and consolidation tests were performed to investigate the variations in mechanical properties of compacted loess contaminated with acetic acid, sodium hydroxide, and sodium sulfate during dry-wet cycles. The mechanical response mechanisms were investigated using zeta potential, mineral chemical composition, and scanning electron microscopy (SEM) tests. The results indicate that the mechanical deterioration of sodium hydroxide-contaminated loess during dry-wet cycles decreases with increasing contaminant concentration, which is mainly attributed to the thickening of the electrical double layer (EDL) by Na + and the precipitation of calcite, as well as the formation of colloidal flocs induced by OH - , thus inhibiting the development of large pores during the dry-wet process. In contrast, the attenuation of mechanical properties of both acetic acid- and sodium sulfate-contaminated loess becomes more severe with increasing contaminant concentration, with the latter being more particularly significant. This is primarily due to the reduction of the EDL thickness and the erosion of cement in the acidic environment, which facilitates the connectivity of pores during dry-wet cycles. Furthermore, the salt expansion generated by the drying process of saline loess further intensifies the structural disturbance. Consequently, the mechanical performance of compacted loess is sensitive to both pollutant type and concentration, exhibiting different response patterns in the dry-wet cycling condition.

Effect of pore fluid pH on the collapse behaviour and microstructural evolution of a loess

Collapse behavior and microstructural evolution of loess soils from the Loess Plateau of China

Microstructural evolution of loess soils from the Loess Plateau of China

Microstructural effects on the wetting-induced collapse in compacted loess

Collapsibility, composition, and microstructure of loess in China

An experimental investigation on engineering properties of undisturbed loess under acid contamination

Characterization and comparison of 3D pore structures and their changes during collapse in Chinese loess and pore classification in terms of collapsibility

Mechanism of Chemical Environment on Compression and Shear Strength of Compacted Loess: A Case Study from Chinese Loess Plateau

Microstructure damage characteristics and its mechanism of undisturbed loess suffering to weak acid leaching

Exploring the mechanical behavior and microstructure of compacted loess subjected to dry-wet cycles and chemical contamination

Evaluation of Structural Strength and Parameters of Collapsible Loess

Collapse behavior and microstructural alteration of remolded loess under graded wetting tests

Investigation of the collapse potential of Malan loess from different regions on the Loess Plateau in terms of pore size distribution and clay distribution form

Investigation on Compressibility and Microstructure Evolution of Intact Loess at Different Wetting States

Experimental Investigation on Microstructure and Surface Morphology Deterioration of Limestone Exposed on Acidic Environment

Investigation on Compressibility and Microstructure Evolution of Intact Loess During Wetting Process

Characterization and evolution of three-dimensional microstructure of Malan loess

The Structure Degradation of a Silty Loess Induced by Long-Term Water Seepage

Experimental investigation of the collapsibility of loess subjected to water invasion

Effects of pre-dynamic loading on hydraulic properties and microstructure of undisturbed loess