Abstract:In this work, steel fibers were used to strengthen the shells for investment casting while improving the shell's thermal conduction. The fibers were dispersed by ultrasound, and the influence of ultrasonic time on the dispersion of fibers in silica sol and effect of fibers dispersion in shell on the resulting green strength, fired strength, high-temperature self-load deformation and thermal conductivity of matrix were investigated. The results suggest that increasing the ultrasonic agitation time can effectively improve the dispersion of fibers in silica sol. When the ultrasonic power was 1000 W and the ultrasonic agitation time was 3 min, the fibers had been dispersed. When power became 1200 W, the fibers can be dispersed in only 2 min. And the green bending strength reached 3.26 MPa. The fired bending strength was 6.39 MPa. The high-temperature self-load deformation of the shell was 0.49%. The dispersion of fibers in the shell is an important factor affecting the performance of the shell. When the fibers are in the state of agglomeration, it cannot bond well with the shell and not play the role of bracing the shell. Meanwhile, when heat passes through the agglomerative fibers, it cannot be transferred out quickly, and even accumulate heat in the shell. When the fibers are in monofilaments state, the fibers in the shell can effectively resist the fracture load of the shell and enhance the bending strength of the shell through its debonding and pulling out with the matrix, as well as its own deformation and fracture. And, the mesh structure formed between the monofilaments can brace the shell and resist the deformation of the shell. Moreover, when the direction of heat transfer is parallel to the axial direction of the monofilaments, the heat can be quickly transferred to the outer wall of the shell through the monofilaments.

Exploration on Preparation Process of High-Strength Fiber-Reinforced Shell for Investment Casting

Strength Evolution and Fracture Feature of Carbon Fiber-Reinforced Silica Sol Shell for Investment Casting

Effect of Ceramic and Nylon Fiber Content on Composite Silica Sol Slurry Properties and Bending Strength of Investment Casting Shell

Effect of Ultrasonic Agitation Time on Properties of Steel Fiber-Reinforced Investment Casting Shells

High-Intensity Ultrasonication Modification of Vapor Grown Carbon Fibers with Poly(Vinyl Alcohol) for the Preparation of High Strength Composites by Simple Water Casting

Cost-effective Fabrication of Bio-Inspired Nacre-Like Composite Materials with High Strength and Toughness

Properties of Fiber Reinforced Plaster Molds for Investment Casting

Study on High-Strength Ceramic Shell of Expendable Pattern Casting

Surface Modification of Shell Waste and Its Application in Polypropylene Composites

Enhanced Comprehensive Properties of Alumina Ceramic Shells by a Pennisetum Fiber/alf3•3h2o Powder Hybrid System

Effect Of Alumina-Based Fiber On The Mid-Temperature Strength Of Integral Ceramic Mold For Casting Hollow Turbine Blade

Bio-filler from Waste Shellfish Shell: Preparation, Characterization, and Its Effect on the Mechanical Properties on Polypropylene Composites.

Preparation, Characterization And Filling Effect Study Of Dye-Loaded Shell Powder On The Properties Of Ldpe Composite

Optimization and assessment of CF/PEEK-PEEK composite shell manufactured by the laser-assisted in situ consolidation integrated with material extrusion process

Microstructure Evolution and Mechanical Properties of Ceramic Shell Moulds for Investment Casting of Turbine Blades by Selective Laser Sintering

Trials on a New Quick-drying and Enhanced Silica Sol

Additive manufacturing of continuous carbon fiber-reinforced silicon carbide composite by fused filament fabrication and precursor infiltration pyrolysis

Impact of Carbon Fiber Content and Length on the Rheological Properties and Coating Performance for Lost Foam Casting

STUDY ON FABRICATION AND SYNERGISTIC EFFECTS OF POLYPROPYLENE COMPOSITES FILLED WITH COMPOUND INORGANIC PARTICLES

The Optimization of Process Parameters and Characterization of High-Performance CF/PEEK Composites Prepared by Flexible CF/PEEK Plain Weave Fabrics

Preparation of Cf/Si3N4 composites based on vat photopolymerization combined with precursor infiltration and pyrolysis