Abstract:With the increase in energy demand and in mining intensity, the phenomenon of multiple coal seam mining has appeared in major coal mining countries. While the downward mining method is generally adopted and under the damage of the upper coal seam, the structure and stress environment of the coal roof are very different from those of a single coal seam in remining. The rock layer between the two coal seams is affected by repeated mining and is prone to rotation instability, which makes it more difficult to reserve gob-side entries along the gob in the lower coal seams. This article mainly targets the case of the gob in the Panel #11426 of Xieqiao Mine, and studies the failure mechanism and control technology of the gob-side entry retaining in short-distance coal seam. First, the floor stress distribution law after mining in the upper coal seam is calculated according to the elastic theory, and verified by FLAC3D numerical simulation; secondly, the floor failure depth after the upper coal seam is calculated according to the elastic–plastic theory. Based on the "block-dispersions" structure, the failure process of the roof of the roadway under close gob is analyzed. Further, it is proposed during the roadway excavation, to adopt support methods such as erecting U-steel retractable supports and back-wall filling; during the mining and before the gob-side entry retaining, the installation of roof bolts (cables), the reinforcement of the roof of the area to be filled and the in-wall filling techniques etc. to control the surrounding rock of gob-side entry. The engineering test was carried out along the track at the Panel #11426 of Xieqiao Mine. The onsite monitoring showed that: the maximum subsidence of the reserved gob-side entry roof along the gob was 180 mm, and the maximum approaching distance of the two banks was 328 mm, which met the engineering requirements. The research results can provide guidance for the design gob-side entry retaining along gobs under similar mining geological conditions.

Gob-Side Entry Retaining Involving Bag Filling Material for Support Wall Construction

Gob-Side Entry Retaining Involving Bag Filling Material for Support Wall Construction

A New Gob-Side Entry Retaining Approach with Reinforced Filling Gangue Wall in Thin Coal Seam

Research on Special Support Technology of Gob-side Entry Retaining with Filling the Non-roadway Side in the Thin Coal Seam

Research on the technology of gob-side entry retaining by pouring support beside the roadway in “three soft” coal seam: A case study

Technology of Gob-Side Entry Retaining on Its Original Position in Fully-Mechanized Coalface with Solid Material Backfilling

An innovative approach for gob‐side entry retaining in deep coal mines: A case study

Research on the Mechanical Properties of Flexible Material Backfilling Wall in Gob-Side Entry Retaining

Research on roof damage mechanism and control technology of gob-side entry retaining under close distance gob

Research on Novel Method of Gob-Side Entry Retaining Under the Synergistic Effect of Roof Cutting and Roadside Filling in Thick Coal Seams

Study of Roadside Packing to Go with Gob-Side Entry Retaining Technology on Crisp Surrounding and Blasting Face in the Xinzhuang Mine

Study on the failure law of surrounding rock in inclined coal seam with gob side entry

Failure analysis and control mechanism of gob-side entry retention with a 1.7-m flexible-formwork concrete wall: A case study

Determination of Reasonable Width of Filling Body for Gob-Side Entry Retaining in Mining Face with Large Cutting Height

Study on Filling Support Design and Ground Pressure Monitoring Scheme for Gob-Side Entry Retention by Roof Cutting and Pressure Relief in High-Gas Thin Coal Seam

Failure Mechanism and Deformation Characteristics of Gob-Side Entry Retaining in Solid Backfill Mining: A Case Study

Optimization of small coal pillar width and control measures in gob-side entry excavation of thick coal seams

Deformation mechanism and control technology of gob-side entry retaining with roadside backfilling: a numerical analysis and field investigation

Research on Goaf Retaining Technology of Double-Layer “Combined” Filling Body in High Gas Mine

Research on the strata behaviors and technical economical effect of gob-side entry filling retaining in southwest region

Analysing the application of a flexible formwork pre-cast wall driving roadway along goaf in a large mining height face