Abstract:Silty soil is commonly utilized in construction or road foundations. One of the main geotechnical concerns associated with silty soil is its insufficient strength and susceptibility to liquefaction, which can lead to soil collapse under external loads or its own weight. In-situ chemical stabilization techniques, such as grouting, are favorable for enhancing the mechanical behavior of the soil. However, their application to silty soil is limited due to their low permeability. This study aims to develop a permeable polyurethane (PP) material for grouting to improve the mechanical properties of low-permeability silty soil. An orthogonal test was conducted to analyze the effects of injection pressure , dry density, water content, and curing time on the mechanical properties of silty soil after grouting (PU-SS). Comprehensive studies were carried out on the internal acoustic characteristics and surface deformation of the consolidated soil under uniaxial compression. Finally, considering the effect of water content on compressive strength,the damage constitutive model of consolidated was established. The results indicate that PP can increase the compressive strength of the silty soil up to 5 MPa. Water content emerges as the primary factor influencing the compressive strength of the consolidated soil, with a decrease in strength as water content increases. The digital surface deformation monitoring technique accurately captured the surface strain characteristics, revealing a relatively uniform surface strain distribution pre-peak stress. Subsequently, a deformation concentration zone formed, evolving into a localized deformation band, inducing shear slip along the fractured surface. The acoustic emission (AE) signal proved significant only during the damage stage. The established statistical damage model effectively characterizes the pre-yield and post-yield stages of consolidated soil, accounting for the influence of water content. In conclusion, the findings suggest that permeable polymer (PP) is more effective in improving the mechanical properties of low-permeability silty soil compared to grouting materials like cement, water glass, and silica sol. Expanding on these results, permeable polymers have potential applications in various areas, including preventing seepage and reinforcing soil embankments, strengthening highway subgrades, and fortifying building foundations.

PERFORMANCE EVALUATION OF USING INJECTION REINFORCEMENT TECHNOLOGY WITH SELF-EXPANDING GROUT OF SOFT SOILS AT THE SUB-BASE OF SHALLOW FOUNDATIONS

In-situ Experiment on Urban Road Subgrade Improved by Plain Concrete Pile and Mixed-in-place Pile

Soil Injection Technology Using an Expandable Polyurethane Resin: A Review

SOIL FRACTURING - AN INJECTION METHOD FOR GROUND IMPROVEMENT. PROCEEDINGS OF THE ELEVENTH INTERNATIONAL CONFERENCE ON SOIL MECHANICS AND FOUNDATION ENGINEERING, SAN FRANCISCO, 12-16 AUGUST 1985

Mineral Injection Mixtures for Construction and Operation of Underground Structures under Dense Urban Development Conditions

Experimental Research on Injection Process of Soil under Hard Shoulder in Freeway Widening Project

Experimental study on vertical bearing performance of base post-grouted cast-in-place plies in soft soils

Geopolymer Materials for Low-Pressure Injections in Coarse Grained Soil: Multiscale Approach to the Study of the Mechanical Behaviour and Environmental Impact

Stress-Strain State of the Zagorskaya PSHPP-2 Foundation During Compensation Grouting

Effect of Pressurization Positions on the Consolidation of Dredged Slurry in Air-Booster Vacuum Preloading Method

Experimental study on the mechanical behaviour of silty soil stabilized with polyurethane

Vertical Fiberglass Micropiles as Soil-Reinforcing Elements

Numerical Analysis of Grouting Reinforcement Effects on Deep Foundation Pits Adjacent to Elevated Railways

CALCULATION OF VERTICAL DEFORMATIONS OF THE FOUNDATIONS ON THE SOFT SOIL IMPROVED BY GEOTEXTILE ENCASED STONE COLUMNS

Innovative Ground Improvement with Chemical Grouts: Potential and Limits of Partial Saturation with Polymers

Non-Dispersive Anti-Washout Grout Design Based on Geotechnical Experimentation for Application in Subsidence-Prone Underwater Karstic Formations

Alternative Ground Improvement Solution with Polyurethane Foam/Resin

Displacement control in irregular deep excavation adjacent to tunnel groups in structural soil: A case study of MJS cement-soil composite piles and grouting rectification

Engineering Method of Calculating Injection Pile Settlement in Clayey Soils

Large-scale model testing of high-pressure grouting reinforcement for bedding slope with rapid-setting polyurethane

Constructive and technological solutions for underground space safety amidst dense historical buildings and weak foundation soils