Experimental investigation of thermal performance of indirect mode solar dryer with phase change material for banana slices

Dheerandra Singh,Prashant Mall

DOI: https://doi.org/10.1080/15567036.2020.1810825

2020-08-25

Abstract:This paper presents an experimental investigation on a natural convection indirect mode solar dryer with phase change material (PCM) for drying of banana slices. The drying system consists of one collector with PCM and a drying chamber with two equally spaced trays. The paraffin wax was used as PCM in the dryer which release latent and sensible heat after sunset that make dryer operate effectively for the next 5 h. For the experimental investigations, 400 g of banana slices were dried from 73.2% (wb) to 20% (wb) of moisture content in 18 h (13 h day time operation + 5 h PCM) during April 2018 at Gorakhpur, Uttar Pradesh, India. Fourteen thin layer models for drying of banana slices, available in the either empirical or non-empirical form, were fitted using experimental data. A statistical analysis software, XL-stat was used to evaluate the values of constants of models and errors through non-linear regression analysis. Modified Henderson and Pabis model was found best suitable for the drying behavior of banana slices among all the models of thin-layer drying characteristics. The average drying rate for the lower tray and upper tray were 0.1316 and 0.1310 kg of water/kg of dried product/h respectively. The moisture content was reduced at a faster rate for the lower tray with moisture ratio from 100 to 28%. The maximum and average dryer efficiency were 9.88 and 2.98%, respectively, and the maximum and average collector efficiency were 85.46 and 66.32% respectively. This study showed that indirect type solar dryer with paraffin wax is suitable for drying of banana because it takes considerable time for drying and can be used for drying of other agricultural crops.

What problem does this paper attempt to address?

The main problem that this paper attempts to solve is to evaluate and optimize the thermal performance of an indirect - type solar dryer combined with phase - change materials (PCM) in drying banana slices. Specifically, the research aims to:

1. **Design and Experimental Verification**: Construct and experimentally evaluate a natural - convection indirect - mode solar dryer that uses paraffin as a phase - change material (PCM) for drying banana slices.

2. **Improve Drying Efficiency**: By introducing the phase - change material (paraffin), continue to provide latent heat and sensible heat after sunset to extend the effective operating time of the dryer (an additional 5 hours), thereby improving the drying efficiency.

3. **Analyze Drying Characteristics**: Through non - linear regression analysis, use XL - Stat software to fit 14 thin - layer drying models to determine the mathematical model that is most suitable for describing the drying behavior of banana slices. Eventually, it was found that the modified Henderson and Pabis model is the most suitable for describing the drying characteristics of banana slices.

4. **Evaluate Drying Performance**: Calculate and evaluate the efficiencies of the dryer and the collector through experimental data, including key indicators such as the maximum and average drying efficiencies, and the maximum and average collector efficiencies.

### Research Background and Motivation

In rural areas in eastern India, especially in places like Gorakhpur, insufficient energy supply is a major problem, and solar energy, as a renewable energy source, has great application potential in these areas. Traditional direct solar drying methods are easily affected by environmental factors, resulting in a decline in product quality. Therefore, developing an efficient and stable indirect - type solar dryer is crucial for improving the drying quality and efficiency of agricultural products.

### Main Conclusions

- **Drying Effect**: Within 18 hours (13 hours during the day + 5 hours at night), the moisture content of 400 grams of banana slices decreased from 73.2% (wet basis) to 20% (wet basis). Among them, the average drying rate of the lower tray is 0.1316 kg water/kg dry product/hour, and that of the upper tray is 0.1310 kg water/kg dry product/hour.

- **Drying Model**: The modified Henderson and Pabis model has been proven to be the most suitable model for describing the drying behavior of banana slices.

- **Efficiency Evaluation**: The maximum and average efficiencies of the dryer are 9.88% and 2.98% respectively, and the maximum and average efficiencies of the collector are 85.46% and 66.32% respectively.

This research shows that an indirect - type solar dryer combined with phase - change materials (such as paraffin) can continue to provide heat at night, significantly improve the drying efficiency, and is suitable for drying other agricultural crops.