Abstract:The study investigates the adsorption of heavy metals (HMs), specifically Cd(II) and Co(II), from aqueous solutions using synthesized iron oxides with layered structures and surface groups of a basic nature: goethite α-FeO(OH), lepidocrocite γ-FeO(OH), and ferrihydrite Fe(OH) 3 . The results indicate that these crystalline materials are effective in adsorbing heavy metals within pH ranges typical of natural aquatic environments (7.5). We determined the conditions for extracting heavy metals, examining the effect of pH in aqueous solutions, ionic strength, adsorbent dosage, and major components of natural waters. The results show that the majority of HM ions are extracted within the first 30 min of contact between the aqueous solution and the solid phase of the adsorbents, with adsorption equilibrium being reached for iron-containing adsorbents in approximately 4 h. To account for the relative distribution of HM species in aqueous environments with varying pH values, we calculated the distribution of these species for the concentrations studied in model water solutions, enabling an evaluation of the extraction mechanism. The adsorption of Co(II) and Cd(II) is primarily driven by the interaction of their cationic forms with ferrinol surface groups of the studied iron-containing minerals through chemisorption from aqueous solutions within the investigated pH range. The adsorption limits for goethite and ferrihydrite are nearly identical, while those for lepidocrocite are significantly lower, which can be attributed to their structure and the availability of active adsorption sites. The shape of the adsorption isotherm curves is also quite similar across the entire concentration range. Based on the data obtained regarding the adsorption efficiency of Cd(II) and Co(II), which are among the most challenging cations to remove using adsorption methods, the synthesized goethite and ferrihydrite can be recommended as cost-effective and efficient materials for the purification of natural waters contaminated with heavy metals.

Adsorption of Cd(II) ions from aqueous solution by wasted low-grade phosphorus-containing oolitic hematite: equilibrium, kinetics and thermodynamics

Effective Cu(II) ions adsorption from aqueous solutions using low grade oolitic hematite tailing with phosphorus: response surface methodology

Conversion of Phosphogypsum into Porous Calcium Silicate Hydrate for the Removal and Recycling of Pb(II) and Cd(II) from Wastewater

Adsorption Behavior And Mechanism Of Cd(Ii) On Loess Soil From China

Discard the dross and select the essence: Purified orange peel with coupled alkali-acid hydrolysis as potential Cd(II)-capturing adsorbent

Effective adsorption of Pb(ii) from wastewater using MnO2 loaded MgFe-LD(H)O composites: adsorption behavior and mechanism

Cd(II) and Pb(II) absorbed on humic acid-iron-pillared bentonite: Kinetics, thermodynamics and mechanism of adsorption

Innovative strategy of turning waste into treasure: High-efficiency adsorption of heavy metals pollutants by modified amorphous calcium phosphate prepared with phosphogypsum waste

Acid-base properties and surface complexation modeling of phosphate anion adsorption by wasted low grade iron ore with high phosphorus

Removal of cadmium (II) from aqueous solution: A comparative study of raw attapulgite clay and a reusable waste-struvite/attapulgite obtained from nutrient-rich wastewater

Removal of Cd(II) and Pb(II) from aqueous solution by modified attapulgite clay

Disposal of Hg( Ⅱ )-Bearing Wastewater by Natural Limonite

Adsorption of Cu(II), Pb(II), Co(II), Ni(II), and Cd(II) from Aqueous Solution by Poly(aryl Ether Ketone) Containing Pendant Carboxyl Groups (PEK-L): Equilibrium, Kinetics, and Thermodynamics

Calcium oxide-modified activated sludge as a low-cost biomass adsorbent for Cd(II) removal in aqueous solution: biosorption behavior and mechanism

The dynamics and adsorption of Cd (II) onto hydroxyapatite attapulgite composites from aqueous solution

Competitive adsorption of Cd(II), Pb(II) and Cu(II) ions from acid mine drainage with zero-valent iron/phosphoric titanium dioxide: XPS qualitative analyses and DFT quantitative calculations

From wastes to functions: preparation of layered double hydroxides from industrial waste and its removal performance towards phosphates

Adsorption and Desorption Behaviour of Pb(II) on a Natural Kaolin: Equilibrium, Kinetic and Thermodynamic Studies

Using Iron-Based Adsorbents for the Removal of Inorganic Ecotoxicants from Aquatic Systems

Ultrafast and highly efficient Cd(II) and Pb(II) removal by magnetic adsorbents derived from gypsum and corncob: Performances and mechanisms

Removal of toxic lead from aqueous solution using a low-cost adsorbent